Wireless modem module SLR-434M
interface moduleRS232FSK

Wireless modem module - SLR-434M - Circuit Design, Inc. - interface module / RS232 / FSK
Wireless modem module - SLR-434M - Circuit Design, Inc. - interface module / RS232 / FSK
Wireless modem module - SLR-434M - Circuit Design, Inc. - interface module / RS232 / FSK - image - 2
Wireless modem module - SLR-434M - Circuit Design, Inc. - interface module / RS232 / FSK - image - 3
Wireless modem module - SLR-434M - Circuit Design, Inc. - interface module / RS232 / FSK - image - 4
Wireless modem module - SLR-434M - Circuit Design, Inc. - interface module / RS232 / FSK - image - 5
Wireless modem module - SLR-434M - Circuit Design, Inc. - interface module / RS232 / FSK - image - 6
Add to favorites
Compare this product

Characteristics

Type
wireless, interface module
Network
RS232, FSK, ISM band
Application
industrial, for IoT applications
Mounting
embedded
Other characteristics
low-power, with digital I/O, long-range

Description

Overview
The SLR-434M is a compact embedded radio modem operating in the 434 MHz ISM band. It supports conventional FSK communication and LoRa® modulation for very long range operation at low bit rates. With high receiving sensitivity, low RF output power operation can achieve ranges of up to a few kilometers or more in line-of-sight conditions. The module connects to an external CPU or PC via a UART (RS232) interface and supports a simple command protocol for industrial applications. The module can process up to 8 switching signals for telemetry and telecontrol applications.

Features
  • RED compliant (EN 300 220)
  • Very long range operation using LoRa® mode
  • Switchable between FSK and LoRa® modes
  • UART interface (COM port, RS232)
  • Simple command protocol for user program development
  • Transmission of up to 8 switching signals via I/O terminals
  • Compact dimensions and low power consumption
  • Improved resistance to urban RF noise compared to conventional FSK


Applications
  • Sensor and telemetry data transmission in buildings and industrial sites
  • Mudslide and debris-flow monitoring at control dams
  • River level and dam monitoring
  • Greenhouse temperature and humidity monitoring and control
  • Sensor data relay from underground installations or manholes
  • Tunnel and bridge condition monitoring
  • Landslide and slope-stability warning systems


Specifications (excerpt)
  • Model: SLR-434M
  • Frequency range: 433.0750–434.7750 MHz
  • Channels: 137 (12.5 kHz step)
  • RF output power: < 10 mW (SMA contact, nominal)
  • RF bit rates: 15–245 bps (LoRa), 4800 bps (FSK)
  • Receiver sensitivity: < -133 dBm (LoRa 128-chip); < -115 dBm (FSK)
  • Supply voltage: 3.3–5.5 V (3.5–5.0 V recommended)
  • Supply current: TX 29 mA typ.; RX 17 mA typ. (@5 V)
  • Dimensions (W×D×H): 40 × 29 × 6.2 mm (excl. antenna connector)
  • Modulation: LoRa or 2-FSK (selectable)
  • I/O: 8 digital I/O for switching signals
  • UART: RS232C, 19,200 bps, RTS/CTS hardware flow control


UART Interface (excerpt)
  • Communication method: Serial communication (RS232C)
  • Synchronization: Asynchronous / UART
  • UART bitrate: 19,200 bps
  • Flow control: Hardware RTS/CTS; software Xon/Xoff not used
  • Other parameters: Data length 8 bits, no parity, 1 (or 2) stop bits


Trademark
LoRa® is a trademark of Semtech Corporation.
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.