Access-control door with hatchover for any type of standard ladder with cage, fixed at the bottom of the ladder (the upper part of the door shall be located at about 2 300 mm above the ground), preventing unauthorized and non-entitled people from climbing.
Locking by padlock
- GROUPS OF USERS
Industry
Enginerring offices
Architects, control offices
Commercial and industrial buildings
Pylons, road signalization gantries
Silos, Water tanks,…
Travelling cranes, gantries
- PRODUCTS DESIGNED FOR
One way access (climbing and descending with the same ladder)
Do not implement on ladders used as emergency exits or ladders connected between one another.
- REFERENCES
AC610Z : hinges on the right hand side, galvanized steel , padlock
AC620Z : hinges on the left hand side, galvanized steel , padlock
AC613Z : hinges on the right hand side, aluminum, padlock
AC623Z : hinges on the left hand side, aluminum,padlock
- ASSEMBLY
On a standard ladder (400 mm with between the uprights). For other dimensions please fill in the dimension data sheet.
By riveting on a steel ladder > with kit range EXP
By bolting on a steel ladder > with kit range EXP2 (optional)
By fixing kit on an aluminum ladder > with kit range M213 (optional)
By adapter kit on a non-standard steel or aluminium ladder> with kit range M303 (optional)
Estimated assembly time : 1/2 hour for 2 persons
ADDITIONAL INFORMATION
Equipement in compliance with following standards
- NF E 85-012 (protection type B) : September 2021
- EN ISO 14122-4 : March 2017
Available on stock
Dispatching within 48/72 hours
Warranty : 12 months