Hydro-oleophobic coating NP250 NATPROT

chemical protectionprotectivefor wood

Product Details
Waterbased, natural-effect, stain resistant water and oil repellent. It is applied indoors and outdoors for the stain-resistant treatment of terracotta and brickwork, stone, marble and unpolished granite, grit and cementitious composites. It reduces the absorption of aqueous, oily and greasy substances. Suitable for food contact, it can be used on all floor and wall surfaces, worktops, kitchen and bathroom counters. Non film-forming, it does not alter the original colour or breathability of the material. NATPROT is ready to use. Apply at least 12 to 24 hours after washing (or treatment with deep penetrating water repellent) on clean, dry or evenly moist material in one or two coats with a brush, cloth or wax spreader, wetting the surface evenly. After drying (1 - 2 hours), any subsequent coat can be applied. After at least 4-6 hours, any finishing products can be applied. Approximate consumption: 10 sqm/1 litre. Avoid application on very hot or very cold surfaces (> 35°C or < 5°C).

Product Table
Code | Description | Pieces
62250/01 | NP250 NATPROT 1lt | 6

Technical Specifications / Features

• Waterbased, natural-effect, stain resistant water and oil repellent
• For indoor and outdoor use
• Suitable for terracotta, brickwork, stone, marble, unpolished granite, grit, cementitious composites
• Reduces absorption of aqueous, oily and greasy substances
• Suitable for food contact
• Usable on floor and wall surfaces, worktops, kitchen and bathroom counters
• Non film-forming
• Does not alter original colour or breathability
• Ready to use
• Application: 12-24 hours after washing, on clean, dry or evenly moist material, 1-2 coats
• Drying time: 1-2 hours between coats, 4-6 hours before finishing products
• Consumption: approx. 10 sqm/1 litre
• Do not apply on surfaces >35°C or <5°C