Transparent coating WP050 WETPROT

wet area

Product Details
An anti-stain, wet-effect and renewing protective agent specifically for terracotta, medium to highly absorbent natural stone, grit and cementitious composites, indoors and outdoors. The special water-based formula allows the product to be applied even on evenly moist materials. It brightens up the colour of the material and gives it a high wet shine. The water-repellent treatment protects surfaces from the penetration and attachment of stains (oil and grease, wine, coffee, etc.). WETPROT is ready to use. Shake the bottle well and apply to clean dry or slightly moist surfaces. Spread evenly with brush, cloth or wax spreader, avoiding excess. Apply at least two coats, allowing the surface to dry thoroughly between coats (at least 60 minutes). Any dripping or excess must be removed before the product dries. Approximate consumption: 10 sqm/1 litre. Avoid application on hot or cold surfaces (> 35°C and <5°C) or in anticipation of atmospheric precipitation.

Product Table
Code | Description | Pieces
62050/01 | WP050 WETPROT 1 lt | 6

Technical Specifications / Features

• Anti-stain, wet-effect and renewing protective agent
• Suitable for terracotta, natural stone (medium to highly absorbent), grit, cementitious composites
• For indoor and outdoor use
• Water-based formula
• Can be applied on evenly moist materials
• Enhances colour and provides high wet shine
• Water-repellent treatment protects against stains (oil, grease, wine, coffee, etc.)
• Ready to use
• Application: Shake well, apply to clean dry or slightly moist surfaces, spread evenly, avoid excess
• Recommended: At least two coats, allow surface to dry thoroughly between coats (minimum 60 minutes)
• Remove any excess before drying
• Approximate consumption: 10 sqm/1 litre
• Do not apply on hot (>35°C) or cold (<5°C) surfaces or before precipitation