Detection system E-SENSE+3 series

Product recognition sensors for paint booths. Thanks to the sensors; a homogeneous powder coating is obtained on the surfaces. At the same time, dust is saved and the amount of excess spray is reduced. The manual coating process is reduced and efficient powder coating of complex workpieces is achieved. GAP DETECTION SYSTEM · Detecting part gaps . Simultaneous closing and opening of all guns in the gaps. VERTICAL PART DETECTION SYSTEM · Detecting workpiece gaps · Automatic measurement of workpiece height · Automatic closing of non-essential pistols according to workpiece height FULL PART DETECTION SYSTEM · Detecting workpiece gaps · Automatic measurement of workpiece height and width · Automatic closing of non-essential pistols according to workpiece height · Automatic adjustment of the painting distance of all guns on each side according to the workpiece width DYNAMIC COUNTOUR DETECTION SYSTEM . Detailed detection of part gaps. . Detailed measurements of the height and width of the part. . Automatic closing of non-essential pistols according to workpiece height · Creation of digital workpiece surface map Automatic gun positioning in accordance with the detected workpiece geometry thanks to the information on the workpiece surface map Homogeneous powder thickness even on the most complex workpieces thanks to the independent gun distance feature Independent gun distance adjustment for homogeneous coating of complex parts E-SENSE+3 series is a critical investment to increase precision, quality and efficiency in powder coating processes and significantly improves the level of automation of powder coating processes.