Rotor mill PULVERISETTE 19
verticalglassfor cables

rotor mill
rotor mill
rotor mill
rotor mill
rotor mill
Add to favorites
Compare this product
 

Characteristics

Technology
rotor
Orientation
vertical
Product application
glass, for cables, coarse powder, for ceramics, for organic waste, for biomass, straw, for mixed waste, mineral wool, for wood, for coal grinding, for plastics, food, for powders, for metals, for ceramic, waste
Other characteristics
laboratory, for the pharmaceutical industry, universal, powerful, heavy-duty, specimen, compact, bench-top, low-speed, for recycling, dry milling, high-speed, fine cutting, for the food industry, high-performance, robust, variable speed, for sample preparation, for secondary demolition
Rotational speed

Max.: 3,000 rpm (18,850 rad.min-1)

Min.: 300 rpm (1,885 rad.min-1)

Output

60 kg/h (132 lb/h)

Description

Variable 300 – 3000 rpm for fine comminution Due to the variable rotational speed adjustment in increments of hundred between 300 and 3000 rpm you can fine tune the comminution process for each sample within a very wide range of applications. The high-speed Universal Cutting Mill PULVERISETTE 19 with a torque of up to 30 Nm comminutes dry, soft to medium-hard sample materials and fibrous materials and plastics with reliable reproducible results with a maximum feed size of 70 x 80 mm and a throughput of up to 60 l/h. One special advantage: Straw, films and similar materials can be fed in up to their full length without additional preparation. And the PULVERISETTE 19 is also ideal for RoHS tests. Due to Clean Design of the PULVERISETTE 19, it is easy to clean and offers a safe protection against cross-contamination. Unique grinding chamber geometry The sample material is comminuted according to the cutting principle of scissors between the cutting edges of the rotor and the fixed knives in the grinding chamber until the desired final fineness is achieved. Unique grinding chamber geometry: The grinding chamber is designed with minimal dead space and progressive cutting geometry between rotor and fixed knives. The sample material is continuously moved during comminution and cannot settle anywhere. In conjunctions with the special air flow, this is the basis for swift, blockage-free operation and fast cleaning without residue. Running stabilisation due to flywheel mass The Universal Cutting Mill PULVERISETTE 19 is equipped with a flywheel mass to stabilize the drive torque.

VIDEO

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.