Hydrocarbon hose Black Gold™

for dieselfor gasolinefor abrasive fluids

Product overview
Recommended for transfer of water, petroleum‑based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Suitable for transfer of refined fuels (gasoline, diesel), oils and other petroleum products. Designed for intermittent contact with refined fuels; hose must be drained after use. Ideal for offshore/onshore dock transfer and fracking suction/discharge applications requiring a lightweight, hardwall, flexible hose with a small minimum bend radius and rated working pressure.

Key features

• CAUTION: Do not convey fuels over +120°F (+49°C).
• UltraBrasion™ wear indicator layer: Yellow Carboxylated Nitrile (Type C4).
• ARPM (Class A) high oil‑resistant tube.
• Available in 4 in (101.6 mm) nominal inside diameter; multiple lengths and pressure variants (400D / 400SD).
• Variants identified by suffixes such as D, SD, AR, TL — see part details.

Available parts / variants

• 64BG6000/4X100FT BLACK GOLD OILFIELD SERVICE 400SD AR | Product # 46882243 | ID 4 in (101.6 mm) | OD 5.10 in (129.5 mm) | Max WP: —
• 4X100 BG OILFIELD FRAC 400D | Product # 41100009 | ID 4 in (101.6 mm) | OD 4.78 in (121.4 mm) | Max WP: 400 psi (27.6 bar)
• 4X100 BG OILFIELD FRAC 400SD | Product # 46882222 | ID 4 in (101.6 mm) | OD 4.78 in (121.4 mm) | Max WP: 400 psi (27.6 bar)
• 4X200 BG OILFIELD FRAC 400D | Product # 41100010 | ID 4 in (101.6 mm) | OD 4.78 in (121.4 mm) | Max WP: 400 psi (27.6 bar)
• 4X200 BG OILFIELD FRAC 400SD | Product # 46882223 | ID 4 in (101.6 mm) | OD 4.78 in (121.4 mm) | Max WP: 400 psi (27.6 bar)
• 4X100FT BLACK GOLD OILFIELD FRAC 400SD TL | Product # 468822226 | ID 4 in (101.6 mm) | OD variable | Max WP: —

Notes

• Transfer hoses intended for intermittent contact with refined fuels must be drained after use.
• Suffixes D, SD, AR, TL indicate part‑specific construction or treatment—refer to part number for details.

Technical specifications

• Recommended fluids: water, petroleum‑based fluids, dilute acids, chemicals, abrasive slurries, refined fuels (gasoline, diesel), oils and other petroleum products.
• Temperature limitation: do not convey fuels above +120°F (+49°C).
• Construction: UltraBrasion™ wear indicator layer (Yellow Carboxylated Nitrile, Type C4).
• Tube: ARPM (Class A) high oil‑resistant tube.
• Typical inside diameter: 4 in (101.6 mm).
• Typical max working pressure (example variants): 400 psi (27.6 bar) for 400D / 400SD.
• Typical outside diameters (examples): 4.78 in (121.4 mm) or 5.10 in (129.5 mm) depending on variant.
• Intended use cases: fracking/well stimulation suction and discharge, offshore/onshore dock transfer, applications requiring lightweight hardwall flexibility with small bend radius.