Humidity test chamber BE-8209 series

temperaturesalt spray corrosionsalt spray

Relevant standards requirement 1.Test Object: battery pack andsystem. 2.Refer GB/T4 part 5.5.2 test method, test according to GT/T2423.17 test conditions. 3.The salt solution was made up with sodium chloride (chemically pure and analytically pure) and distilled or deionized water，Its concentration is (5 + 1)% (mass fraction). 4.(35 ± 2) ℃, the measured pH value is between 6.5-7.2. 5.Placed the test objects in the salt spray chamber for cycling test. Each cycling duration for 24h. Spray salt solution to the test object for 8 hours under the temperature of (35± 2) ℃ , remain for 16 hours. Between the forth and the fifth hour in one cycles should be according to test requirement in GB/T 28046.1-2011, test mode with 3.2. 6.Total 6 cycles testing. 7.Salt spray test is not necessary for the test objects being installed in passenger, luggage or cargo compartments. Technical Parameters: Internal DimensionW2000 X D3000 X H2000 mmW2500 X D3000 X H2000 mm Max Load1000KG for battery pack Temp. Fluctuation±0.5℃ Temp. Deviation2℃ Spray Capacity1~2mL/80cm2/hr (Collect at least 16 hours, take the average ) Spray Pressure1.00±0.01kgf/cm² ResolutionTemp: 0.01℃, Humidity:0.01%R.H. Humidity Fluctuation±3%R.H. Potion PHNeutral 6.0～7.0 Acidity 3.0～3.1 Spray Solution PHNeutral 6.5～7.2 Acidity 3.1～3.3 Test Time Range1S ～ 9999H (Settable) Control ModeTouch screen programmable control PLC, networking; mobile phone APP alarm; with USB interface,with RJ485 interface can be connected to computer control, exclusive network control software. Remote monitoring and data acquisition.