Engraving spindle DGZX-10036/6.0

finishingmillingmotorized

Overview
The DGZX-10036/6.0D-KFPWVS is a high-speed engraving and milling spindle with a Φ100 housing and HSK E32 tool interface. Rated continuous power is 6.0 kW (S1) with a maximum speed of 36,000 rpm. The spindle is designed for high-precision surface finishing and high-speed engraving on metals and non-metallic materials used in industrial applications.

Features

• Patented broach mechanism: Haozhi broach mechanism provides tool-change life ≥10 million cycles, force reduction <10% during life, and ~30% lower vibration versus traditional disc-spring designs; vibration fluctuation during lifecycle ≤10%.
• Efficiency and drive options: Available with high-power single- or double-winding asynchronous motors and synchronous motor options; grease or oil-air lubrication schemes.
• High precision: Typical bore/runout and axial/dynamic precision values suitable for precision finishing (static run-out ≤2 µm; dynamic run-out ≤8 µm; axial dynamic precision ≤2 µm).
• Industrial reliability: Optimized structural simulation, comprehensive testing and validated field use for stable performance in production environments.

Parameters
Model: DGZX-10036/6.0D-KFPWVS
Diameter (housing): Φ100 mm
Maximum speed: 36,000 rpm
Tool interface: HSK E32
Bearing type: Hybrid ceramic bearings
Max. frequency: 1,200 Hz
Motor system: Asynchronous (options available)
Voltage: 380 V
Power output S1 100%: 6.0 kW
Power output S6 40%: 9.0 kW
Torque S1 100%: 2.8 N·m
Torque S6 40%: 4.3 N·m
Tool change: Automatic direct (pneumatic) tool change
Tool change air pressure: 0.55–0.60 MPa
Air seal pressure: 0.15 MPa
Air seal flow: 60 ± 20 L/min
Cooling system: Water cooling
Coolant flow rate: 3–4 L/min
Temperature sensor (motor): KTY (optional PTC)
Static run-out: ≤2 µm
Dynamic run-out: ≤8 µm
Vibration velocity: ≤0.8 mm/s
Housing material: Stainless steel
Weight: 17.5 kg

Technical specifications

• Model: DGZX-10036/6.0D-KFPWVS
• Housing diameter: Φ100 mm
• Tool interface: HSK E32
• Max. speed: 36,000 rpm
• Motor power S1 (100%): 6.0 kW; S6 (40%): 9.0 kW
• Torque S1: 2.8 N·m; S6: 4.3 N·m
• Bearings: Hybrid ceramic bearings
• Max. frequency: 1,200 Hz
• Nominal voltage: 380 V
• Tool change: Automatic pneumatic direct change (0.55–0.60 MPa)
• Air seal flow: 60 ± 20 L/min (0.15 MPa)
• Cooling: Water cooling recommended (3–4 L/min)
• Temperature sensor: KTY (PTC optional)
• Run-out (static/dynamic): ≤2 µm / ≤8 µm
• Vibration velocity: ≤0.8 mm/s
• Weight: 17.5 kg