Machining spindle DQFH-02360B/2.4

motorizedwater-cooled

Product overview
At 7.74 kg the DQFH-02360B dicing spindle provides a compact, lightweight solution with continuous output of 2.4 kW. With a maximum speed of 60,000 rpm, air bearing support and specified vibration limit, it is intended for compact semiconductor dicing equipment.

Key Parameters
Maximum speed: 60,000 rpm
Power (S1): 2.4 kW
Power (S6): 2.9 kW
Torque (S1): 0.38 N·m
Torque (S6): 0.46 N·m
Vibration velocity: ≤0.2 mm/s
Weight: 7.74 kg

Technical data
Spindle model: DQFH-02360B/2.4
Tool interface: generic dicing blades
Bearing type: air bearing
Max. frequency: 2000 Hz
Motor system: synchronous motor
Rated voltage: 220 V
Rated current S1 (100%): 7.5 A
Rated current S6 (40%): 11.25 A
Power output S1 (100%): 2.4 kW
Power output S6 (40%): 2.9 kW
Output torque S1 (100%): 0.38 N·m
Output torque S6 (40%): 0.46 N·m
Gas flow: 70–80 L/min
Cooling system: water cooling
Cooling flow rate: ≥2 L/min
Motor temperature sensor: KTY84-130
Tool change: manual

Dimensions
Dimension drawing available on the product page.

Applications
Designed for compact semiconductor dicing / cutting machines where high speed, low vibration and compact mass are required. Requires appropriate gas supply and water cooling; electrical supply per rated voltage and currents.

Features / Technical specifications

• Model: DQFH-02360B
• Maximum speed: 60,000 rpm
• Continuous power (S1): 2.4 kW
• Peak power (S6): 2.9 kW
• Torque S1: 0.38 N·m
• Torque S6: 0.46 N·m
• Bearing type: air bearing
• Tool interface: generic dicing blades
• Motor: synchronous
• Rated voltage: 220 V
• Rated current S1 / S6: 7.5 A / 11.25 A
• Gas flow: 70–80 L/min
• Cooling: water cooling (flow ≥2 L/min)
• Motor temperature sensor: KTY84-130
• Tool change: manual
• Vibration velocity: ≤0.2 mm/s
• Weight: 7.74 kg