Electrostatic charge generator AGW / AGW PUR

HAUG charging systems are intended for the contact-free application of electrostatic charges. These systems are used wherever different materials need to be fixed to one another electrostatically. This electrostatic fixation is intended to support downstream processes such as the film overlap in packaging machines. At least one of these materials must be insulating. CHARGING GENERATOR AGW / AGW PUR PROFIBUS The charging generator AGW / AGW PUR Profibus is a high-voltage generator which is used in combination with HAUG charging electrodes type ALW and a suitable counter-electrode. The charging electrode must be attached at a distance of 10–30 mm above the material to be charged, exactly opposite the counter-electrode. Where a grounded counter-electrode is used, this counter-electrode must make contact with the material to be charged. In order to achieve a continuous, controlled fixation of the two materials, we strongly recommend that the materials to be fixed to one another be discharged before charging using a suitable HAUG ionization system. SPECIAL FEATURES AND ADVANTAGES The charging generator AGW / AGW PUR Profibus generates a stabilized, adjustable high voltage of up to 25 kV and supplies a maximum output current of 2.5 mA. The units are available with positive and negative polarity. On the AGW, the voltage and the actual flowing current are indicated on the integrated digital measuring instruments. In the case of the AGW PUR Profibus, these measured values can also be output through the bus system.