Cabinet OLT MA5801 series

rack-mount

Product Overview
As optical fiber access nodes keep moving closer to end users, OLTs are closer to end users. Deployment scenarios are complex and diversified. In this case, network needs OLTs with small volume and low density.
The MA5801 series OLT is a compact and low-density box-shaped OLT. It provides multiple fiber to the home (FTTH) solutions to meet the requirements of economical and efficient network construction. It can be flexibly deployed in fast fixed mobile convergence (FMC) scenario, national broadband coverage scenario, and enterprise's all-optical campus scenario.

Key Features

• Lightweight and small size: Less than 5 kg, 1 U installation space
• High reliability: Dual AC/DC power supplies, Type B/C quick switchover
• Easy installation and flexible deployment: Suitable for both indoor and outdoor cabinets. The matching small outdoor cabinet can be installed on a pole, tower, or wall

Technical Specifications
Parameters
MA5801-GP16 | MA5801-GP08 | MA5801-FL16 | MA5801-FL04
Dimensions (W x D x H) (mm)
Excluding mounting ears: 442 x 220 x 43.6
Including IEC mounting ears: 482.6 x 220 x 43.6
Including ETSI mounting ears: 531 x 220 x 43.6
Weight (full configuration) (kg)
DC Power supply: 4.2 | AC Power supply: 4.6 | DC Power supply: 3.3 | AC Power supply: 3.5
Power supply mode
DC power supply (dual backup), AC power supply (dual backup) | DC power supply, AC power supply
Working voltage range
DC power supply: –38.4 V to –72 V | AC power supply: 100–240 V
Rated voltage
DC power supply: –48 V/–60 V | AC power supply: 110 V/220 V
Maximum input current
DC power supply: 6 A | AC power supply: 2.5 A
Ambient temperature
–40°C to +65°C. The device can start up at a lowest temperature of –25°C. NOTE: The +65°C temperature refers to the highest temperature measured at the air intake vent of a service subrack.
Ambient humidity
5%–95% RH
Atmospheric pressure
70–106 kPa
Altitude
< 4000 m. The air density varies with the altitude and will affect the heat dissipation of a device. Therefore, the working environment temperature of the device varies with the altitude.
System switching capacity
140 Gbit/s | 110 Gbit/s | 460 Gbit/s | 185 Gbit/s
MAC addresses
32768
Access ONT
1024 | 2048 | 512
IPv4 routing table
8192
IPv6 routing table
4096
ARP table
16384
Bit error rate (BER) in full load
A BER smaller than 10 e-10 for a port that transmits data in full load | When FEC is enabled, the GPON BER is less than 10 e-10, and the XG(S)-PON BER is less than 10 e-12.
Upstream ports
4 GE/10GE | optical ports: 4 x GE/10GE, electrical ports: 2 x GE/2.5GE
Service ports
16 GPON | 8 GPON | 16 Flex-PON | 4 x FlexPON (GPON, XG(S)-PON, XG(S)-PON&GPON Combo)
System reliability specifications
System availability for the typical configuration: > 99.999%
Mean time between failures (MTBF): about 62 years (varies by model, see table)
NOTE: Due to different network environments and different boards used by devices, the preceding MTBF is only for reference. The average repair time for field replaceable units (FRUs) is about 2 hours. The preceding values are only for reference.

Characteristics / Technical Specifications

• Compact and low-density box-shaped OLT
• Multiple FTTH solutions
• Flexible deployment: FMC, broadband coverage, all-optical campus
• Less than 5 kg, 1U installation
• Dual AC/DC power supplies, Type B/C quick switchover
• Indoor/outdoor cabinet compatibility
• System switching capacity up to 460 Gbit/s (model dependent)
• Supports up to 2048 ONTs (model dependent)
• Operating temperature: –40°C to +65°C
• System availability: >99.999%