Rotating table shot peening machine PP8SC-DR-BO

for springsfor metalfor cylinders

Shotpeening machine type PP8SC-DR-BO is suitable for automatic shotpeening of cylindrical parts (shafts, pipes, axles…) thanks to the rolling device installed on the loading trolley. The equipment is designed with a main trolley that permit the loading/unloading process outside the cabin. The entrance/exit of the trolley into/out to the chamber is automatic (motor-driven). The cylindrical parts are placed on horizontal rotating device with rotation control. The nozzles are placed on a special holder to focus the peening process on the part (without flow intersections). On the roof of the cabin, a single axle gantry permits the movement of the nozzles (stroke 3.000 mm). A double pressure vessel with Magnavalves permits a continuous process without interruptions and with an accurate flow control. Shotblasting machines with rotating satellites type PTR-S-R are designed to treat sensitive parts in singularly mode with any kind of shots. The nozzles are managed by a robot. The machine is equipped with a main indexed table that permits the entrance/exit of the parts into/out to the blasting chamber. The main table is equipped with 2 or 4 satellites; each partition is divided by a wall to prevent media leakage and noise escape in the operator’s area.One station is dedicated for loading/unloading, while another one (opposite to the loading area) is dedicated to the blasting/peening process. The nozzles are driven by a robot. The number of nozzles is defined according to the loading volume, the production rate and the geometry of the pieces. This machine is usefully for manual loading/unloading operation