Multi-axis positioning system Shuttle

3-axis2-axislinear

1-arm shuttle, suspended, 2-axle drive Suspended 1-beam shuttle. The rack and lifgo® linear are suspended under the beam for the horizontal drive. The superstructure and two lifgo® for the Z-stroke are attached to this. Grippers, suction cups or other devices can now be mounted on the suspended standard aluminium profile. 1-arm shuttle, suspended, 2-axis drive with 5 gripper stations The horizontal lift is mounted in a suspended position. In contrast to the previous example, the vertical lift has been designed so that a second lifgo® gearbox is mounted in the horizontal direction next to each vertically aligned one. The gearboxes are each connected and synchronised via a profile shaft. In the horizontal direction, a tensile force is exerted on the racks, which causes the pinions to rotate. This force is transferred to the vertical lifgo® , and the rotation is redirected back into a linear movement (vertical in this case). 2-axis transfer with gripper function Standing 2-axis transfer parts conveyor. One lifting axis horizontal, one gripper or closing axis, synchronous from both sides to the centre. Can be used as a step conveyor. Also available as 3-axis transfer with horizontal and vertical stroke and synchronous closing axis. 2-arm shuttle, standing, 2-axle drive from outside Designed as a 2-axis transfer shuttle with externally mounted drives. The system can also be designed as a 3-axis transfer gripper shuttle.