Stationary lift tables

Capacity: 500, 1,000, 1,500, 2,000 kg
Lift: 590 mm - 1,600 mm

... self lubricating bushings on pivot points. It also safeguards against overloading through hydraulic power pack set inside the table. It provides compensated flow valve for controlled lowering speed. The machine can be ...

Capacity: 7,000, 1,000, 2,000, 3,000, 5,000 kg
Lift: 800 mm - 2,000 mm

Single Scissor Lift Table - Type 1A is ideal for heavy duty applications. It can be used to solve problems throughout the industry such as - machine feeding, stacking etc. The load applied is partially ...

Capacity: 300, 800, 1,300, 1,500 kg
Lift: 800, 1,000, 1,200, 1,600, 950 mm

The 1E-T series is manufactured by Bolzoni auramo, and is tilting platform that can tilt up to 35° in one direction. The unit is ideal for use in applications where tiny components need to be taken from a container lifted by the platform. ...

Capacity: 20,000 kg
Lift: 500 mm - 18,000 mm

Rigid chain, reliable and proven technology SERAPID develops operator levelling platforms in collaboration with automobile manufacturers and integrators. These podiums are specially designed to remedy operator ergonomic, comfort and ...

Capacity: 4,000, 5,000, 650, 1,250 kg
Lift: 50 cm - 1,800 cm

Rigid chain, reliable and proven technology SERAPID develops operator levelling platforms in collaboration with automobile manufacturers and integrators. These podiums are specially designed to remedy operator ergonomic, comfort and ...

... efficient lifting tables / lifting systems are required, which allow robots to work at optimal levels. The lifting table pictured was built with two ...

... Dual-Dok® system provides both dock leveler and dock lift functions at a single dock position. The Dual-Dok lift/leveler saves valuable space by eliminating the part-time position of a scissors lift ...

... control over all functions for easy and safe operation. Loading/Unloading Versatility - Heavy duty, twin cylinder hydraulic lift makes it possible to safely and efficiently service all standard trailer heights. Superior ...

Capacity: 10,000 kg
Lift: 1,600 mm - 2,000 mm

Capacity: 2,500 kg
Lift: 800 mm

Capacity: 1,000 kg
Lift: 500 mm

The tilting lift Table (TEI) makes it possible to perform an elevation and inclination to facilitate the handling of the operator. Load from 200 kg to 1000 kg Elevation of 500 mm tray 30 ° inclination ...

Capacity: 1,000, 2,000, 2,500, 3,000, 4,000 kg
Lift: 1,500 mm - 4,300 mm

... version of the BX table - two scissor mechanisms are fixed on top of each other. This provides increased lift travel (for use between two floors in a building, for example) with capacities ...

Capacity: 400, 500, 1,000, 2,000 kg
Lift: 800 mm

Hymo AX Lift Tables is available with lifting capacities up to 2000 kg and a stroke of 800 mm. HYMO AX equipped with fork entry base frame (optional accessory) becomes a flexible solution when the movement ...

Capacity: 400 kg
Lift: 800 mm

Hymo AXX is a standard model available with a lifting capacity of 400 kg and a stroke of 800mm. Hymo AXX has a vertically mounted double scissors package. Hymo AXX is ideal for handling with "half-size" pallets (800*600mm).

Our lifting tables for production lines are tailor-made solutions to meet the specific requirements of each sector. Dynalserg's product line is characterised by the use of selected materials, a robust ...

... hydraulic oil. Ideal for such sensitive sectors as the automotive and aviation industries. Belt driven lift tables are a perfect alternative to hydraulic lift tables, ...

HYDRAULIC LIFTING TABLES WITH INTEGRATED ROLLER CONVEYOR Hydraulically operated lift tables are universally applicable, combining excellent value for money with long ...

SCISSOR LIFT TABLES – “BOOST” A lift table is a useful piece of equipment for lifting loads, with a simple ‘scissor’ like mechanism which creates a strong support for ...

Capacity: 2,000 kg
Lift: 205 mm - 1,050 mm

Electric lift table HW series, dimensions mm. 820x1300 and mm. 1000x1600, max. eight mm. 1000, load capacity Kg. 1000. The lifting platforms HW series are lifting equipment to be installed in a fixed ...

... removable for transportation and installation Mechanical lock for maintenance Painting with yellow RAL 1028 Passage width for the pallet mm. 585

Capacity: 1,000 kg
Lift: 85 mm - 860 mm

Lifting platform HY 1000 scissor low profile and access ramp for loading/unloading with pallet. Lifting platform HY 1000 pantograph with low profile and access ramp for loading / unloading with transpallet. Features Structure in high ...

Capacity: 1, 20 kg
Lift: 0 mm - 300 mm

These manual positioning tables are intended for vertical using (or horizontal when working zone must be loosened). This range complete the classic positioning tables (fixed by 2 end plates or by the ...

The pantograph lift table is a very useful machine for the complete emptying of tanks, especially when they have to be emptied by falling product and their content is particularly viscous. With the ...

Lifting table with a single pantograph. Special frame designs.

Capacity: 2,200 kg
Lift: 9 in - 28 in

... Strain and Risk of Injury from Lifting, Bending and Stretching. This ergonomic tool is ideal for building or unpacking pallet loads. A combination of heavy-duty springs and shock absorbing dampener maintain a constant ...

Capacity: 2,000, 1,500, 1,000 kg
Lift: 85 mm - 870 mm

... The hose burst safety valve is used for stopping the lift table from lowering in case of hose breakage. The unit also has removable lifting eyes to facilitate handling and installation of the lift ...

Capacity: 500 kg
Lift: 170 mm - 800 mm

The TE500 is manufactured by i-lift Equip, and is a motorcycle lift that is ideal for use in lifting applications. The unit has a heavy-duty layout, and its scissor structure guarantees durability and ...

Capacity: 30,000 kg
Lift: 2,300 mm

The PE 30/X, a lifting platform manufactured by Morello, is used to lift any kind of load in simple, functional and secure way. Ascending platforms are typical in all manufacturing areas, with consequent reduction of ...

Capacity: 12,000 kg
Lift: 2,450 mm

Morello's lifting platforms are used to lift any type of load in an easy, functional, and safe way. It is suitable for manufacturing sectors, with reduced work time and production cost. The platforms are constructed ...

Capacity: 500, 1,000, 2,000, 4,000 kg

... universal stationary lifting table for lifting heavy loads can be used in a space-saving manner by placing the lifting table in a pit. Properties •Robust ...

DESCRIPTION ERIMAC's tables allow the handling, the lifting, the vivration of an unitarian load. DOMAINS OF USE Our machines are designed for industrial exploitation. Atmosphere without specific constraint. Atmosphere ...

Capacity: 1,100 lb
Lift: 23 in - 39 in

The Guardian Series represents the ultimate in lift table safety with features that are optional or not available on other lift tables. Guardian Series lift ...

Capacity: 2,200 lb
Lift: 36 in

The Max-M22/33 ergonomic scissor lift table incorporates all the popular features of the time-tested Max-Lift premium lift table into an economical quality ...

Capacity: 2,000, 3,000 lb
Lift: 32 mm

... duty 1.7 HP lift motor allows up to 12 full lifts per hour on average, with a competitive lift speed and runs on a 115 volt input 15 amp circuit. Available in 4 models, The G-Series has ...

Capacity: 500, 10,000 kg
Lift: 885 mm - 2,380 mm

... . Heavy duty cylinders and check valve to stop the lift table lowering in case of hose burst High quality hydraulic cylinders Heavy duty cylinders and check valve to stop the lift ...

Capacity: 1,000, 500, 4,000, 2,000 kg
Lift: 1,485 mm - 4,860 mm

... . Heavy duty cylinders and check valve to stop the lift table lowering in case of hose burst High quality hydraulic cylinders Heavy duty cylinders and check valve to stop the lift ...

Capacity: 2,000, 4,000, 6,000 kg
Lift: 1,360 mm - 2,000 mm

... . Heavy duty cylinders and check valve to stop the lift table lowering in case of hose burst High quality hydraulic cylinders Heavy duty cylinders and check valve to stop the lift ...

Capacity: 3,000 kg
Lift: 100 mm - 1,000 mm

Super-slim pro le (only 10 cm) to t the car quickly. It can be flush mounted. New lifting supports with height regulation with thread. High quality and 3.000 kg capacity (4.200 kg CE test).

Capacity: 3,000 kg
Lift: 120 mm - 1,000 mm

Hydraulic lift with ramps for a direct and quick lifting from wheels, avoiding the uncomfortable processes of arms placing It is perfect for mechanics, for engine works and oil changes Its sizes allows small cars (like ...

Capacity: 3,000 kg
Lift: 120 mm - 1,680 mm

New pulling tower with smooth and accuracy displacement of 180º. Solid and compact frame with 3 m. length for any repair. Double safety device and twin lifting rams.

Capacity: 2,000 kg
Lift: 705 mm

Capacity: 500, 1,000, 800, 2,000 kg
Lift: 750 mm - 1,250 mm

... Series lifting tables respond effectively to the main needs of loads’ lifting up to 2.000 kg capacity. It is therefore possible to pick beyond 20 models, entirely built, set up and tested into the Armo’s ...

Capacity: 1,000, 2,000 kg
Lift: 880 mm

Our extra flat lifting tables are perfect to lift pallets, with no need to make a pit. Once it gets closed, it has a very small height to the ground, and is provided with a hydraulic ...

Capacity: 500, 22,000 kg
Lift: 3,000 mm

... tailor-made scissor lifting tables specific for heavy loads’ lifting. Dimensions, capacity and stroke will be set down at the design, and realized according to the customer’s specific needs.. Our heavy ...

Capacity: 11.3 kg
Lift: 25 mm - 83 mm

... unobstructed lift. Velmex pre-configured Elevating Tables lift to a height of 15.5" (393.7 mm) with a travel distance of 9" (165.1 mm). The large table can handle ...

Capacity: 13.6 kg
Lift: 38 mm - 165 mm

... unobstructed lift. Velmex pre-configured Elevating Tables lift to a height of 15.5" (393.7 mm) with a travel distance of 9" (165.1 mm). The large table can handle ...

Capacity: 22.7 kg
Lift: 51 mm - 203 mm

... unobstructed lift. Velmex pre-configured Elevating Tables lift to a height of 15.5" (393.7 mm) with a travel distance of 9" (165.1 mm). The large table can handle ...

Capacity: 300, 5,000 kg
Lift: 1,130 mm - 4,280 mm

... more floors. Our platforms are constituted by a rigid base frame, resting directly on the floor where there is pantograph lifting system that is built with the principle of equal resistance, and to the top of it there’s ...

Capacity: 4,000, 1,000, 500, 3,000, 2,000 kg
Lift: 2,150 mm - 7,800 mm

... more floors. Our platforms are constituted by a rigid base frame, resting directly on the floor where there is pantograph lifting system that is built with the principle of equal resistance, and to the top of it there’s ...

Capacity: 500, 1,000, 2,000, 3,000, 5,000 kg
Lift: 3,000 mm - 6,650 mm

... more floors. Our platforms are constituted by a rigid base frame, resting directly on the floor where there is pantograph lifting system that is built with the principle of equal resistance, and to the top of it there’s ...

Capacity: 160 kg
Lift: 320 mm - 1,280 mm

... tools. - After turning the table off it blocks automatically (cutting power off does not make the table fold). - The table can be equipped with a drawer for upholstery tools. - It has ...

Capacity: 130 kg
Lift: 320 mm - 1,280 mm

... tools. - After turning the table off it blocks automatically (cutting power off does not make the table fold). - The table can be equipped with a drawer for upholstery tools. - It has ...

Capacity: 130 kg
Lift: 320 mm - 1,280 mm

... pneumatic cylinder is foot-controlled. - The table has a connection slot for pneumatic tools. - After turning the table off it blocks automatically (cutting power off does not make the table ...

Capacity: 11,000 kg
Lift: 1,700 mm

... bridged. Equipped with spécial accessories, the scissor stroke tables also serve as an ergonomie workstation,for example in assembly halls. Our Hydaulik lift tables are popular as freight ...

Capacity: 12,000 kg
Lift: 1,100 mm

... bridged. Equipped with spécial accessories, the scissor stroke tables also serve as an ergonomie workstation,for example in assembly halls. Our Hydaulik lift tables are popular as freight ...

Capacity: 1,500 kg
Lift: 1,100 mm

Hydraulic hub tilting tables for every purpose BÜTER is a leading specialist in hydraulic stroke tilting tables. Our range covers the entire spectrum, from standard models to special lifting tables. ...

Capacity: 1,500 kg
Lift: 880 mm

Electric scissor lift table 1000 kg. Adjustable height to achieve a comfortable working position in all situations, assembly stations, control stations, as palletizing, machine output, etc.. Controlled ...

Capacity: 1,000, 1,500 kg
Lift: 840, 880 mm

Slimline Table with U-shaped platform, are the best choice when handling palletised loads up to 1000 kg pallets can be deposited and withdrawn directly from the platform by a truck. No need pit for installation and can ...

Capacity: 150 kg
Lift: 1,200 mm

Manual lifting table with rolling scissors of 150 Kg that allows to work at a comfortable height to perform tasks such as handling, translation, repair, packaging, control of parts or products, transportation ...