Shielded twisted pair control signal cables
AWG 20 = 0.56 mm2 (7 x 0.32, tinned)
Copper conductors in AWG sizes, 7-wire, UL 1061 and VDE 0881
Small core and cable diameters
No filling material in the outer layers
No twist markings
Will not break under vibration
Oil resistant to a limited extent
Petrol resistant to a limited extent
Flame-retardant as per UL VW-1/CSA FT-1
Resistant to weathering
Especially suitable for insulation displacement and crimp connectors
Suitable for: digital signal connections in and between electrical systems, control systems,
regulation systems, measurement systems, signalling systems and pulsed signal systems.
Shielded against external interference.
Connection system: low-cost connection using insulation displacement connectors.
Core structure: As per Style No.1061 and VDE 0881,
copper strands 7 x 0.32 mm Ø tinned = 0.56 mm2,
insulated with semi-rigid PVC. Insulation wall thickness 0.25 mm, Ø of insulated core 1.5 mm.
Core labelling: international colour code (see page 7).
Twisted structure: 2 cores are twisted to a pair, the pairs are then twisted clockwise
layer by layer (started with the colours black/brown) from inside out to form the cable core.
No filling material is used in the outer layers.
Pair twist length: approx. 38 mm
Wrapping and shield: the twisted pair bundles are wrapped in overlapping transparent plastic foil
and shielded with a dense braid of tinned copper wires, visual coverage ≥ 85%.
An additional shield wire composed of tinned copper wires (7 x 0.32 mm ø) is connected to the shield.