Security safety edge PSE series

A Safety edge can be used wherever moving edges pose a risk. The safety edge is a rubber profile, which deforms under pressure and triggers a safe stop via the associated control interface unit. Pressure-sensitive safety edges can reduce risks at hazardous points up to Performance Level 'e' in accordance with EN ISO 13849-1. Safety control unit, For evaluating safety thru-beam sensors PSE4-SL, Safety category 3 according to EN61496-1, 24 V DC supply voltage, 1 safe output contact, Performance level PLd (EN13849-1) is attainable, Component of PSE4 modular system, Number of channels: 4-channel, Performance level (PL): PL d, Category: Cat. 3, Operating voltage: 24 V DC +20/-10 % Aluminum mounting strip, For mounting rubber sensor strips PSE4-RUB and -ROI, Simple to customize to application, Possible to connect in series, Component of PSE4 modular system Rubber profile, For mounting to ALU mounting strip PSE4-ALU, Simple to customize to application, Versions up to 10 m in length are available, Component of PSE4 modular system Safety control unit, For evaluating safety thru-beam sensors PSE4-SL, Safety category 4 according to EN61496-1, 24 V DC supply voltage, 2 safe output contacts, Performance level PLe (EN13849-1) is attainable, Component of PSE4 modular system, Number of channels: 1-channel, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC +20/-10 %, Connection: screw terminals , Cable cross-section 0.2 ... 2.5 mm2