Acrylic adhesive TA4208BK series

for metalsingle-componentindustrial

PERMABOND® TA4208 BLACK is a 2-part, 1:1 toughened acrylic adhesive. It can be used to bond a wide variety of materials including metals, plastics, composites, ceramics, wood and other substrates. The adhesive can provide excellent shear strength on many substrates with little surface preparation. Surface Preparation Surfaces should be clean, dry and grease-free before applying the adhesive. Permabond Cleaner A is recommended for the degreasing of most surfaces. Some metals such as aluminium, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer. Directions for Use 1) Surfaces must be clean, dry and grease-free. If using a cleaning solvent, allow 3-4 minutes to fully evaporate before applying adhesive. 2) Apply a thin bead of adhesive pre-mixed through a static mixer nozzle. 3) Assemble components and clamp. 4) Maintain pressure until handling strength is achieved. The time required will vary according to the joint design and surfaces being bonded. 5) Allow 24 hours for adhesive to fully cure. Accelerated cure times may be achieved by heating. Additional Information This product is not recommended for use in contact with strong oxidizing materials. This product may affect some thermoplastics and users must check compatibility of the product with such substrates. Information regarding the safe handling of this material may be obtained from the safety data sheet (SDS). Users are reminded that all materials, whether innocuous or not, should be handled in accordance with the principles of good industrial hygiene