Hydrogen analyzer H₂-Trans

monitoringindustrialconcentration

Description
The H₂-Trans is an industrial hydrogen analyzer designed for accurate measurement at trace (ppm) and percent levels. The instrument offers a simple display and one-point calibration for fast commissioning. Optional ATEX certification: Ex ia IIC T4.

Overview

• Measured parameters: Hydrogen (% and ppm)
• Detection method: electrochemical fuel cell
• Measuring ranges: user-selectable; 0–10,000 ppm and 0–100 % (user ranges between 100 ppm and 10 %)
• Accuracy: ±2 % FSD
• Response time T90: up to 45 s (0–1 %)
• Output: 4–20 mA, 2-wire
• Supply voltage: 10–35 V

Detailed description
The unit supports one user-defined measuring range within the available span. It is built for continuous industrial use with a compact enclosure suited to on-site monitoring and integration into process control systems.

Sensor
The H₂-Trans uses a dedicated fuel cell sensor optimised for hydrogen detection. The sensor provides the sensitivity and lifetime expected for industrial monitoring tasks.

Calibration
Trace-range calibration must be performed with a calibration gas at the chosen concentration inside the measuring range. For percent-range measurements, calibration can be performed using ambient air.

Features

• Compact footprint
• Cost-effective solution for continuous monitoring
• Long-life sensor
• IP65 enclosure for industrial environments
• Reverse-voltage protection and temperature compensation

Flow-through measuring cell in Stainless Steel

• Modular stainless steel measuring cell
• Field serviceable: replace the defective part without replacing the entire cell

Standard Features

• Interchangeable sensor options
• Five selectable measuring ranges
• 316 SS stainless steel cell block

Application Areas

• Semiconductor industry
• Gas manufacturers
• Metallurgical industries
• Chemical industry
• Heat treating and bright annealing

Technical specifications

• Parameters: Hydrogen % / Hydrogen ppm
• Method: electrochemical (fuel cell)
• Range: 0–10,000 ppm; 0–100 %; user ranges between 100 ppm and 10 %
• Resolution: 0.1 ppm
• Flow rate: approx. 1 L/min
• Pressure: 0.1–1 bar
• Calibration: calibration gas for trace range; air possible for percent range
• Response time T90: 0–1 % = 45 s
• Gas temperature: 0–50 °C
• Output: 4–20 mA, 2-wire
• Supply voltage: 10–35 V
• Display: LCD 6 digits with bargraph
• Protection class: IP65
• Connection: 6 mm
• Dimensions: 120 x 160 x 65 mm
• Weight: 2 kg
• ATEX: optional Ex ia IIC T4
• SIL: Yes
• Accuracy: ±2 % FSD