Abrasion-resistant coating 300 series

compositeconcretesteel

RESOLTECH 3000T / 3005T is a paint used to obtain a brilliant finish on different substrates: composite parts, steels, concrete ... (not to use on polystyrene). On porous substrates, it is recommended to apply two coats of 3010T BLANC / 3014T primer in order to close the porosities. After sanding with a P120 or P240 grain, dusting and degreasing, the colored and glossy epoxy finish can be made with the 3000T / 3005T system (any color available according to the RAL color chart). The 3000T / 3005T system provides excellent chemical resistance as well as good resistance to UV and abrasion. This solvent system has a long pot life and a low viscosity suitable for roller and spray application. It is thus possible to prepare large quantities. The product then has a fast drying time in film, good adhesion and applicability without sagging. Dilution and cleaning of tools is carried out with DIL 3019. An anti-slip finish can also be achieved by incorporating the P112 filler during the last layer. Add 4 to 15% by weight. Excellent chemical and thermal resistance Application by brush, roller or spray High solids content, glossy finish Easy to use, curing at room temperature Available in any color according to RAL color chart Mix density 1.31 Gel time on 70 mL, 4cm at 23°C 12h