Helical screw flow transmitter LABO-VHS-U

compact

The VHS flow transmitter measures the flow using the volumetric principle, and is suitable for fluid, viscous, lubricant media (e.g. lubricating oil). If the material for the VHS is selected appropriately, aqueous fluids such as soaps, pastes, and emulsions with non-abrasive characteristics can also be measured, as long as they have sufficient lubricity. Because of the volumetric functioning principle, the device is almost completely independent of viscosity. The VHS system consists of two interlacing screws which run in opposite directions, driven by the flowing medium. A magnetically pre-tensioned Hall sensor positioned outside the flow space detects the screw flanks, and creates a frequency signal proportional to the flow. Here, every pulse corresponds to a specific measured volume. There are no magnets in the flow space. A model with switching output is also available (see separate datasheet). If desired, the range end value can be set to the currently existing flow using "teaching". ● Measures and monitors viscous media (oil) 1.4..2500 l/min ● Connection G 1..G 21/2 ● Very low dependence on viscosity ● Can be used up to 40,000 mm²/s (cSt) ● 0..10 V, 4..20 mA , frequency/pulse output, completely configurable ● Light and compact device (aluminium housing) ● Operation and measurement possible with forward and reverse flow ● For cost-sensitive applications