Slide potentiometer 18FLPC series

manualconductive plastichand-operated

Product
Linear conductive-plastic potentiometer 18FLPC for linear position sensing. Available in 25 mm and 50 mm electrical stroke versions with front and rear extended shaft options.

Features

• Linear potentiometer / linear position sensor
• Conductive-plastic resistive element
• Front and rear extended shaft
• Optional spring-return device; sealed (IP54) variant available

General specifications (18FLPCC25RE)
Standard resistance values: 500 Ω, 1K Ω, 2K Ω, 5K Ω, 10K Ω
Total resistance tolerance: ±10% (K)
Independent linearity tolerance: standard ±0.5%, precision ±0.2%
Resolution: essentially infinite
Output smoothness: <0.1% vs input voltage
Contact resistance variation: <2% C.R.V.
Power rating: 0.5 W
Electrical stroke: 25±1 mm
Mechanical stroke (MS): approx. 30 mm
Insulation resistance: >1000 MΩ (500 V D.C.)
Dielectric strength: 1 minute at 1,000 V A.C.
Friction: <3 N (300 gf)
Spring-return device: fitted (standard)
Stopper strength: approx. 90 N (9 kgf)
Resistance temperature coefficient: ±400 p.p.m./℃
Mass: approx. 100 g

General specifications (18FLPCC50RE)
Standard resistance values: 500 Ω, 1K Ω, 2K Ω, 5K Ω, 10K Ω
Total resistance tolerance: ±10% (K)
Independent linearity tolerance: standard ±0.5%, precision ±0.1%
Resolution: essentially infinite
Output smoothness: <0.1% vs input voltage
Contact resistance variation: <2% C.R.V.
Power rating: 0.75 W
Electrical stroke: 50±1 mm
Mechanical stroke (MS): approx. 55 mm
Insulation resistance: >1000 MΩ (500 V D.C.)
Dielectric strength: 1 minute at 1,000 V A.C.
Friction: <3 N (300 gf)
Spring-return device: fitted (standard)
Stopper strength: approx. 90 N (9 kgf)
Resistance temperature coefficient: ±400 p.p.m./℃
Mass: approx. 150 g

Special specifications available

• Special strokes: 75 mm (S18FLPCC75), 100 mm (S18FLPCC100), 150 mm (S18FLPCC150), 200 mm (S18FLPCC200)
• Sealed type: IP54 (length "A" increased by approx. 12 mm)
• Spring-return device: available for 75 mm & 100 mm; spring return mounted on outer shaft; friction with cardan joint approx. 3 N
• Cardan joint: available (friction approx. 3 N)
• Extra tap: available (without spring-return device)
• Leadwire terminals: up to 1 tap (only on connector version)

Technical characteristics

• Model family: 18FLPC series (e.g. 18FLPCC25RE, 18FLPCC50RE)
• Resistance values: 500 Ω, 1K Ω, 2K Ω, 5K Ω, 10K Ω
• Total resistance tolerance: ±10% (K)
• Linearity tolerance: standard ±0.5%; precision ±0.2% (25 mm) / ±0.1% (50 mm)
• Resolution: essentially infinite
• Output smoothness: <0.1% vs input voltage
• Contact resistance variation: <2% C.R.V.
• Power rating: 0.5 W (25 mm), 0.75 W (50 mm)
• Electrical stroke options: 25±1 mm, 50±1 mm (special: 75, 100, 150, 200 mm)
• Mechanical stroke: approx. 30 mm (25 mm electrical), approx. 55 mm (50 mm electrical)
• Insulation resistance: >1000 MΩ (500 V D.C.)
• Dielectric strength: 1 minute at 1,000 V A.C.
• Friction: <3 N (300 gf)
• Spring-return device: fitted as standard (additional options available)
• Stopper strength: approx. 90 N (9 kgf)
• Resistance temperature coefficient: ±400 p.p.m./℃
• Mass: approx. 100 g (25 mm), approx. 150 g (50 mm)
• Sealed option: IP54 ("A" increased ≈12 mm)
• Cardan joint option: friction approx. 3 N
• Leadwire terminal option: up to 1 tap (connector versions)