Digital conductivity sensor 114C

RS-485ModbusModbus RTU

Measurement accuracy ± 0.5μS to ± 500μS Two-electrode measurement method with temperature compensation. Measurement range from 20μS to 20000μS Max operating temperature 50 ° C Max pressure 10 bar Measurement transmission via RS485 MODBUS RTU digital communication Combine with MCA800 control unit Description The 114C conductivity sensor, connected to the MCA800, is used for conductivity measurement in pure and process water. Reliable two-electrode conductive measurement method thanks to the use of graphite electrodes with temperature compensation. Additional information Materials - Graphite electrodes, Probe body in PVC Threads - 1” GAS BSP Measurement intervals - 0.0 μS to 20,000 μS Method of measurement - conductive with two electrodes Calibration method - on 1 point with certified standard conductive solutions Accuracy - ± 0.5 μS f.s 20 μS, ± 5 μS f.s 200 μS, ± 50 μS f.s 2000 μS, ± 500 μS f.s. 20000 μS Resolution - 0.01 μS f.s 20 μS, 0.1 μS f.s 200 μS, 1 μS f.s 2000 μS, 10 μS f.s. 20000 μS /L Repeatability - ± 0.1 μS f.s 20 μS, ± 0.5 μS f.s 200 μS, ± 5 μS f.s 2000 μS, ± 50 μS f.s. 20000 μS mg/L Response time - T90<60s Maximum refresh time - < 1 second Operating temperature - 0÷50 °C Maximum operating pressure - 10 bar Electric absorption - 2W Mechanical protection - IP68 Sensor + cable Cable length - 10m integral with the sensor (others on request) Power supply - 12÷24Vdc Communication protocol - Modbus RTU Temperature compensation - with internal NTC sensor Luminophore diameter - 10mm Dimensions l x h x d (mm) - 33x220x33mm