Mold rotator

positioninghydraulic180°

The switch operation of the machine is completed by the independent control cabinet knob. Turn off to show the power-on state from the meeting, and then the machine is ready to run. When operating the button, the Angle is out of time due to the clearance of the limit switch, the knob switch can be used to correct.When the button is operated, the angle will change due to the clearance of the limit switch, and the rotation of the switch can correct it. 2、When button switch in use, the emergency stop button must be reset to the raised state. If it is not reset to the raised state, the machine will be unable to operate. 3、 Press the start button with one hand to operate the machine. 4、During machine running, Please do not lower the flip table on either side first to make sure till to the flipping is finished. 5、When both tables are in horizontal, the side on which the weight is placed can be rotated,the situation is very dangerous, must forbid absolutely. It must be 90 degrees from one side to the other, and then can begin to flip running. 6、Oil temperature is fixed at 60 degrees and the motor is 100 degrees.