Acrylate adhesive Fast®-1640

for metalglassfor ceramics

No-mix acrylate rear mirror adhesive kit SikaFast®-1640 is a toughened and impact resistant no-mix acrylate based on 2-components. It is suitable to bond glass, ceramic, metal and a combination of these materials. SikaFast®-1640 Gel must be used in combination with SikaFast®-1640 Activator. Ideal to bond rear mirror brackets to windscreens 100 % reactive substance, no solvents Very fast curing to handling strength Areas of Application SikaFast®-1640 is ideally suited to bond rear mirror brackets to vehicle windscreens. It is suitable to bond glass, ceramics and metals as well as combinations of these materials. It may also be used for magnetic materials (ferrites). This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility. Surface Preparation Surfaces must be clean, dry and free from grease, oil and dust. Remove all loose particles or residues by cleaning it thoroughly, for example with an IPA wipe. Due to the diversity of materials, preliminary tests with original substrates are necessary. Application Mark the area where the adhesive has to be applied for correct alignment. Apply plenty of the SikaFast®-1640 Activator with the brush which is part of the closure of the bottle to one of the bonding surfaces. On glass to metal applications, the SikaFast®-1640 Activator is applied on the glass side. The SikaFast®-1640 Activator is free of solvents and must be liquid when joining the two parts. It therefore must not dry off. Apply a thin layer of the SikaFast®-1640 Gel onto the other substrate.