USB interface module usbLink CN

Connect Laptop to ControlNet Network - Use RSLinx version 2.51 or later - Use RSNetWorx for ControlNet to communicate with devices via RSLinx - USB 2.0 connector for connection to laptop or PC - RJ-45 connector for connection to NAP (network access port) of a ControlNet network enabled device Configuration on the Move - Use usbLink CN when you travel to sites with ControlNet as a quick and easy way to temporarily connect and configure networks and devices with a laptop - Use RSLinx to scan/browse a ControlNet network - Use RSNetWorx for configuring devices, configuring the network, read diagnostics and status, and troubleshooting - Use RSStudio (RSLogix) for PLC programming Rockwell Technology Partner Product - The usbLink CN replaces the Allen Bradley 1784-U2CN - Softing is a Rockwell Technology Partner and the usbLink CN is an approved product in the Technology Partner Program Easy Setup - Load RSLinx software and the usbLink CN device driver if using RSLinx versions before v2.54. RSLinx v2.54 and later contains the necessary device driver - Use the rotary switches to set the module node address (1 - 99) - Insert USB end of the cable to laptop - Insert RJ-45 end of cable into a ControlNet enabled access port (NAP) - LEDs indicate USB status, module status, and ControlNet network status