Solenoid interlock STM 295 series

• Thermoplastic enclosure • Double insulated X • Spring-to-lock or power-to-lock principle • Locking force 1000 N • Wiring compartment • With LED Applied standards EN ISO 13849-1, EN 60947-5-1, EN ISO 14119 Enclosure thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0 Switch type type 2 Coding level low coding Tightening torque cover screws: 0.5 … 0.6 Nm switch inserts M3 screw connection terminals: min. 0.6 Nm solenoid M3.5 screw connection terminals: min. 0.8 Nm Degree of protection IP67 (IEC/EN 60529) B10d (10 % load) 1 million TM max. 20 years Switching system slow action, positive break NC contacts A Switching elements 1 NC/1 NO contact + 1 NC/1 NO contact or 2 NC + 1 NC/1 NO contact, type Zb Connection screw connection terminals Cable cross-section min. 0.2 mm² (AWG 24), max. 1.5 mm² (AWG 16) Cable entry 2 x M20 x 1.5 Rated insulation voltage Ui 250 V Rated impulse withstand voltage Uimp 4 kV Conventional thermal current Ithe 4 A Utilisation category AC-15; DC-13 Rated operating current/voltage Ie/Ue enabling/signalling contacts: 4 A/250 VAC; 0.25 A/230 VDC; direct-current solenoid: 0.08 A / 24 VDC +10 %/–15 % Short-circuit protection 6 A gG/gN fuse; direct-current solenoid: 2 A (slow blow) Power consumption 500 000 operations Locking force Fmax 1000 N Ambient temperature –20 °C … +55 °C