Tube drive unit

Product Overview
Torso clamshell drives and motors provide solutions for clamshell pipe cold cutting and machining. Drives are supplied in pneumatic, hydraulic and electric configurations; motors are available in pneumatic, hydraulic, electric and servo variants. Standardized motor interfaces simplify maintenance and replacement to reduce downtime and operational cost.

Product Features

• Compact, lightweight design to facilitate transport and installation.
• High torque output suitable for cutting and machining hard materials.
• Durable construction with low routine maintenance requirements.
• Multiple configurations and accessories available for application-specific setups.
• Integrated safety features for secure, user-friendly operation.

Technical data
Drive options:
Pneumatic — Air requirement: 90 cfm @ 0.6/0.7 MPa
Hydraulic — Hydraulic requirement: 2–60 l/min @ 12.5 MPa
Electric — Supply: 220–240 V, 1 PH, 50/60 Hz

Feed rate:
Fixed at 0.08 mm per revolution

Drive motor — Electric:
Motor power: 1800 W / 2000 W
Working voltage: 220–240 V
Working frequency: 50–60 Hz
Working current: 8–10 A

Drive motor — Pneumatic:
Working pressure: 0.8–1.0 MPa
Working air consumption: 1000–2000 l/min
(Drive air requirement reference: 90 cfm @ 0.6/0.7 MPa)

Drive motor — Hydraulic:
Working power options: 5.5 kW, 7.5 kW, 11 kW
Motor supply reference: 380–440 V / 3 PH
Rated pressure: 10 MPa
Rated flow: 5–45 l/min
(Drive hydraulic requirement reference: 2–60 l/min @ 12.5 MPa)

Servo motor:
Motor power: 2.3 kW – 4.0 kW
Working voltage: 220 V / 380 V
Working frequency: 50–60 Hz
Equipped options: remote 50 m start/stop, PLC control

Specifications

• Product type: Drive Unit for clamshell pipe cold cutting — TCCM series (split-frame clamshell machines).
• Drive configurations: Pneumatic, Hydraulic, Electric.
• Motor variants: Pneumatic, Hydraulic, Electric, Servo.
• Pneumatic drive — air requirement: 90 cfm @ 0.6/0.7 MPa; working pressure 0.8–1.0 MPa; consumption 1000–2000 l/min.
• Hydraulic drive — example requirement: 2–60 l/min @ 12.5 MPa; motor power options 5.5 / 7.5 / 11 kW; rated pressure 10 MPa; rated flow 5–45 l/min.
• Electric drive/motor — typical motor power 1800 W / 2000 W; supply 220–240 V, 1 PH, 50/60 Hz; working current 8–10 A.
• Servo motor option — 2.3–4.0 kW; voltages 220 V / 380 V; 50–60 Hz; supports remote and PLC control.
• Feed rate: fixed at 0.08 mm per revolution.
• Optional accessories: 50 m remote control, PLC control; standardized motors to simplify maintenance.