8-bit microcontroller TLCS-870/C1

for automotive applicationscommunicationanalog

The analog input value is AD-converted 10 times, and the average result is displayed on a terminal emulator. The analog input value is AD-converted once, and the result is displayed on a terminal emulator. By selecting a frequency of the divider output, pulse waves are output. - The port input by switch triggers the generation of the external interrupt. An LED turns on when the external interrupt is detected. - In MCU mode, this sample software applies Security Program and writes test data using a support program (API) provided in the BOOTROM. - In Product ID mode, this sample software reads the vendor ID, flash ID and security status from the flash memory and displays them on a terminal emulator. - In MCU mode, the control program is transferred to the RAM and writes or reads test data. - This sample software rewrites a program transferred from an external control board using a support program (API) provided in the BOOTROM and shadow RAM. This sample is for the external control board. - This sample software rewrites a program transferred from an external control board using a support program (API) provided in the BOOTROM and shadow RAM. This sample is for the target board. - The sample software of an external control board writes or reads test data on the target board through UART communication. - The NORMAL1 and STOP modes are switched by pushing down a switch, and the LED display is also switched according to the operation mode. - The values from 0 to 999 are counted up per second and displayed on the LCD. - The operation mode is changed by a switch input. An LED turns on or blinks according to operation modes. - When a switch is pushed down,