... mounted compact I/O modules Indication for Diagnostics, Power and Communication Adds I/O capability to your PLC, SCADA and Modbus networked devices Programmable inputs allow same modules to accept ...
Renu Electronics Pvt. Ltd.
... port Multifunction Controller that includes Relays, Isolated Digital Inputs, Analog Inputs, Event Counters, Digital Filter, Auto Report on input change facility and more. The Analog Inputs are based on ...
Intelligent-Appliance
... on-the-rack controller and up to 4 analog, digital, serial, and special-purpose SNAP I/O modules. The SNAP-PAC-RCK4 can be DIN-rail or panel mounted. This rack works with all SNAP I/O ...
Opto 22
... the Z32 FlorenZ Series CNC and the peripherals (drives and I/O). Its connections are: RTE (Real Time Ethernet): connection to the central unit of the CNC Z-Link: optical fiber bus for I/O, analog ...
D.Electron
... T), equals 2 TE Ethernet LAN port TFTP firmware update The LyconSys I/O modules are the optimal solution for controlling analog and digital I/O signals in a network. Our I/O ...
The MPNC030 product is an expansion module for analog inputs. The MPNC030 module has 4 independent and individually programmable analog inputs for acquisition of voltage, current and temperature ...
MECT SRL
Extremely high life contactless rotary differential transformers that are ideal when duty cycle is high and where the transmission of an AC signal is a requirement. For use in applications where a variety of output characteristics are ...
... terminals, 4x highside output 0.4A/36V with analog feedback, 4x lowside output 1.2A/36V with digital feedback, 8x ground referenced digital input, 4x analog input 0-36V, 4x frequency input 0-10kHz ...
Industrial Cellular Remote I/O - Quick configuration by USB and Cloud - Reporting updated status to Cloud if any inputs are detected - Hundreds of combinations of trigger conditions and actions - Built-in opto-isolated ...
Next Industries s.r.l
... channel GC-3864 - T type thermocouple - Thermocouple - 4-channel GC-3874 - J type thermocouple - Thermocouple - 4-channel Analog output - GC-4602 - Voltage output, 16 bits - -5V~+5V - 2-channel GC-4622 ...
... an 8-channel, 16-bit, analog data acquisition system. Configure each channel as a single-ended or differential input. Monitor and log sensors connected to the analog inputs using the X-418's intuitive ...
Xytronix Research & Design, Inc.
... Ethernet, Up to 6 CAN-FD and 4 LIN, up to 5 SENT Charging Interface: J1772AC / China GB/T - AC/DC Inputs: Up to 21 analog or up to 21 digital Drivers: 7 high- / 18 low-side / 6 configurable LS/HS outputs, ...
... Pressure sensor for tank liquid level metering • N. 9 Relays 250V 5A outputs contacts • N. 2 Analog 4-20mA/0-20mA outputs (not optocoupled) • N. 2 Analog 4-20mA/0-20mA inputs (not optocoupled) • N. ...
... various modules. The analog modules of the MADDA series are perfectly suitable for the acquisition of measurement data as well as for analog controlling tasks. 16 ANALOG INPUTS. 250KHZ. ...
... preloaded with "All I/O registers FPGA System". It also containes an MBBA Board that is utilized to connect Altera USB Blaster to mini PCIe card. "All I/O registers FPGA system" that is capable to drive ...
Operating Temperature Range –20~70°C 8 channel analog input (0~5v or 0~20mA) , 12 bit 8-point isolated digit input 5-48 VDC(with SOE), or 8-point single channel counters up to 1 KHz 8-point relay output, 250VAC ...
Beijing Tengcon Technology Co.,Ltd.
Rack-Based Specialty I/O Over 20 years ago, our direct interface technology was referenced within the Rockwell Automation “Pyramid Solutions Program,” now the “Encompass Program.” Since that time, AMCI has developed ...
AMCI
Main Features - 1-channel RTD Input Module - Resolution: 16-bit - Analog Input Type: Pt or Cu100, Cu50, BA1, BA2, B53 - Sampling Rate: 10Hz - Input Connection Type: - R-8031: 2, 3 or 4 wire - R-8031A: 2, 3 wire - ...
Beijing Gemotech Intelligent Technology Co., Ltd.
... preoperational commands. Special Features CAN-IO Module CIO CAN I/O module for industrial applications 8 digital outputs 24V Analog voltage and current inputs in different combinations ...
4 Analogue outputs module. Available in CANBUS or MODBUS RS485 versions. Device able to provide voltage, current signals and current loop, using four different and galvanic insulated channels and power lines. ...
... differential analog inputs -8 input ranges, 4 unipolar and 4 bipolar, channel-by-channel programmable -Autocalibration and oversampling for real-time accurate data -A/D starts via software, timer, or external ...
ACCES I/O Products, Inc.
Highlights • - 4-Channel 12-Bit Wireless 0-10V Input endNode with USB • - Each Analog Input Includes a Dedicated Non-Shared Ground Input • - For Use with Existing Sensors that Already Include a Power Solution • - ...
National Control Devices
... systems developed by different manufacturers, it is appropriate to use the MODBUS protocol. The I/O modules on offer either support a single type of I/O signal or a combination of signals. In terms ...
AMiT, spol. s r.o.
... channels accessible using LightViper VIM-MY32 YGDAI cards. The VIM-2032 acts as a slave card, providing 32 channels of analog AND 32 channels of digital output. This enables the user to gain access to 32 channels ...
... technology is the GRIPLINK controller. It is the bridge between compatible IO-Link field devices and the robot controller. Thus, it is not an ordinary fieldbus master that would forward IO-Link signals ...
Please specify:
Help us improve:
remaining