ADVANTECH I/O

The PCI-Express board with 32 digital outputs APCIe-2032 has 32 digital outputs, 24 Vand a programmable watchdog. It is especially suited for applications like signal switching, ON/OFF monitoring of motors, lights etc., als interface ...

The PCI-Express 32 digital I/O board APCIe-1500 has 32 digital inputs/outputs, 24 V, 14 inputs are interruptible. The 16 digital power outputs are equipped with protection diodes and filters. The board is fully compatible ...

The PCI-Express 64 digital I/O board APCIe-1564 has 64 digital inputs/outputs, 24 V. It is especially suited for applications like signal switching, ON/OFF monitoring of motors, lights etc., as interface to electromechanical ...

The BACnet I/O modules allow digital and analogue input values to be connected using the BACnet communication protocol. MS/TP (Master/Slave Token-Passing) based on the RS485 standard is used here. This allows a total ...

The Modbus I/O modules allow digital and analogue input values to be connected using the Modbus communication protocol. MS/TP (Master/Slave Token-Passing) based on the RS485 standard is used here. This allows a total ...

The slide-in module for analogue input is designed to record voltages of -10 to +10 V and current signals of 0/4 to 20 mA. Laboratory apparatus, such as thermostats, mixers or measuring sensors, can be connected to the four potential-free ...

This slide-in module controls laboratory apparatus with analogue voltage or current inputs for control and regulation purposes. The module uses four 6-pin Tuchel sockets according to NAMUR standard for the output of analogue signals. The ...

This module enables up to 4 Pt100 temperature sensors to be connected. Due to the four-wire technology the length of the wire has no effect on the accuracy of measurement. The resolution is greater than 0.01 °C. The measurement ...

... range of input and output options including 6 digital inputs, 2 digital outputs making it suitable for a variety of remote I/O applications. Automatic Data Collection You don't need to do much to collect data. Internal ...

The module MR-SM3 is a smart meter component for building automation. Current, voltage, power and many other values can be captured by three 230 Volt current circuits. In addition, the device provides monitoring functions of for example ...

... analog signals from the actor and sensor level directly to a control unit in building automation via Modbus RTU protocol. 29 I/Os, some of them are configurable, are available for different tasks. With strong inductive ...

The Modbus module with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, switching two ...

Standard I/O board with digital inputs/outputs and analogue inputs/outputs 6DI,DO,2AI,1AO,+10Vr,+24V

IO board, 1 x RO (NO/NC), 1 x TI (thermistor input) Relay board with two relay outputs and one thermistor input

Digital input modules for the modular fieldbus IO system TB20. The scope of delivery already includes the appropriate front connector for the cabling and a base module. The module has 6 digital inputs. The terminals ...

Digital input modules for the modular fieldbus IO system TB20. The scope of delivery already includes the appropriate front connector for the cabling and a base module. The module has 4 digital inputs.

Digital input modules for the modular fieldbus IO system TB20. The scope of delivery already includes the appropriate front connector for the cabling and a base module. The module has 8 digital inputs.

VISY-Input is an input module with eight inputs, installed in a splash-proof housing IP66. It combines external alarm outputs with the highly precise tank content measurement system VISY-X. Flexible choice of installation site Low-cost ...

VISY-Output is a relay output module with eight outputs, installed in a splash-proof housing IP66. It combines the highly precise tank content measurement system VISY-X with external safety devices for alarm indicators. Flexible choice ...

The Basic 120 series offers 8 single-ended input channels per module with maximum acquisition rates ranging from 200kS/s to 3MS/s and resolutions between 16 bit and 20 bit. By using 2 modules in one carrier board it is possible to provide ...

The Fast 150 series offers differential input channels with resolutions in a range from 14 to 18 bit and maximum sampling rates starting at 1MS/s up to 100MS/s per channel. There are also switchable modules available, which for instance ...

The KET-DDX-410, designed for the realisation of control systems used in building automation, is an I/O module with 4 digital inputs for dry contact (max 30 Hz) and 4 digital SPDT relay outputs type NC C NO with capacity ...

The analog input module MV210-101 has 8 analog inputs which can be connected to various types of RTDs, thermocouples, position encoders, and standard signals. To communicate the input data to a controller, an Ethernet port and Modbus ...

The digital input module MV210 has 20 or 32 digital inputs able to connect switch contacts as well as NPN or PNP transistors. To communicate the input data to a controller, an Ethernet port and Modbus TCP are at your disposal. The module ...

The digital input module MV210 has 20 or 32 digital inputs able to connect switch contacts as well as NPN or PNP transistors. To communicate the input data to a controller, an Ethernet port and Modbus TCP are at your disposal. The module ...

TCW181B-CM is an Ethernet digital IO module for monitoring of one and control up to eight devices per unit. TCW181B-CM is 8-channel Ethernet digital IO module. The device is manageable by WEB interface, ...

TCW241 is an Ethernet IO module, the right choice for factory automation and distributed process control. TCW241 is an Ethernet IO module with Modbus TCP/IP support. It is intended to use for general ...

TCW280 is an Ethernet analog output module with galvanically isolated ports. Analog output module supports two channels with voltage or current loop modes. The channel mode is WEB interface configurable. The available choices are – 0-20mA, ...

24-channel digital I/O ISA multifunction board w/analog input/output (replaces RTI-820) Features For ISA computers Up to 64 Analog Input Channels (Dependent on Interface Panel Used) 12-bit resolution, ...

Panel I/O – Processor and Multifunction I/O Board with 16 A/D, 2 D/A, 20 DIO, One I2C and One RS-232/422/485 Port Features Compact board level size (4.5" x 8.5" x 0.75") Compatible with ...

... analog and digital I/O boards for use in UEI’s Cube/RACKtangle/FLATRACK I/O chassis respectively. The board offers a powerful combination of I/O including 16 single-ended/8 differential ...

The PCH Raw Data Box provides four additional raw data output channels to PCH Engineering’s top-of-the-line vibration monitor, PCH 1420. PCH Raw Data Box is a stand-alone module in PCH Engineering’s modular condition monitoring solution, ...

The PCH Input Box adds six DC process inputs and one Loop power input for external sensors to PCH Engineering’s advanced PCH 1420 vibration monitor. PCH Input Box is an optional module in PCH Engineering’s modular condition monitoring ...

The xtremeDB -1 (pronounced: "dash one") CANopen module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog mode. Two of the digital ...

The xtremeBLOCK CANopen module combines many different I/O signal configurations. It offers a total of 12 inputs, eight of which can be parameterized as analog. The remaining four digital inputs can also be configured ...

... "xtremeDB 8 inputs 8 outputs, SAE J1939" The xtremeDB -1 (pronounced: "dash one") SAE J1939 module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized ...