Transform Transforms analogue measurements into digital data Real-time Real-time digital measurements with alarm functions Calibration Individual calibration Limitless Limitless measurement possibilities Limitless possibilities The ...
Transform Transforms analogue measurements into digital data Real-time Real-time digital measurements with alarm functions Calibration Individual calibration Limitless Limitless measurement possibilities Limitless possibilities The ...
... module and up to 10 I/O modules in a compact mechanical enclosure - Distributed topology In this topology the Controller is integrated by the central system expanded with up to 16 Remote I/Os units ...
... Full-Duplex Distributed Clock1ms Cable typeCAT5 UTP/STP Ethernet cable Surge protection10KV Transmission speed100 Mbps I/O isolation voltage3750Vrms AD Converter Effective resolution16 bits Conversion time~ ...
Taiwan Pulse Motion
... interface. The transmission speed is up to 100 Mbps. EZC Add-on moduels can provide high-speed, high-accuracy and low-cost remote I/O for EtherCAT®. Features ● 16-Ch. DO slave module with NPN type ● TPM EtherCAT® ...
Taiwan Pulse Motion
... interface. The transmission speed is up to 100 Mbps. EZC Add-on moduels can provide high-speed, high-accuracy and low-cost remote I/O for EtherCAT®. Features ● 16-Ch. DO slave module with NPN type ● TPM EtherCAT® ...
Taiwan Pulse Motion
... Cscape SmartRail based I/O is a modular I/O system for Horner OCS supporting Ethernet, CsCAN and CANopen based protocols. It is a flexible I/O system that can be applied as a local ...
TCW241 is an Ethernet IO module, the right choice for factory automation and distributed process control. TCW241 is an Ethernet IO module with Modbus TCP/IP support. It is intended to use for general ...
Teracom
TCW280 is an Ethernet analog output module with galvanically isolated ports. Analog output module supports two channels with voltage or current loop modes. The channel mode is WEB interface configurable. The available choices are – 0-20mA, ...
Teracom
TCW122B-CM is a remote IO module with SNMP v1 support. It is dedicated to remote environmental monitoring and control. TCW122B-CM is a remote IO module for environmental monitoring and control, designed ...
Teracom
Panel I/O – Processor and Multifunction I/O Board with 16 A/D, 2 D/A, 20 DIO, One I2C and One RS-232/422/485 Port Features Compact board level size (4.5" x 8.5" x 0.75") Compatible with ...
UEI - United Electronic Industries
... analog and digital I/O boards for use in UEI’s Cube/RACKtangle/FLATRACK I/O chassis respectively. The board offers a powerful combination of I/O including 16 single-ended/8 differential ...
UEI - United Electronic Industries
... 207 (DNA-AI-207, DNR-AI-207, DNF-AI-207) are analog input data acquisition boards for use in UEI's Cube/RACKtangle/FLATRACK I/O chassis respectively. The DNx-AI-207 features 16 differential input channels with maximum ...
UEI - United Electronic Industries
Seven Millivolt modules enable the XR440 Data Logger to accept a millivolt signal on channel 3. Three modules (Mvt-11b, Mvt-22b, Mvt-50u) accept a thermocouple (Type J, K, N, R, S, T, B, C, or E). A built-in, precision thermistor on channel ...
The SPiiPlus IOMnt-32-32 (Network Inputs and Outputs Module) is an EtherCAT digital I/O module with 32 inputs and 32 outputs. The input voltage is 24Vdc
EtherCAT ® Digital I/O Modules Powerful Digital and Analog I/O Modules for EtherCAT® Network Up to 32 Inputs and 32 Outputs Compact and cost effective Easy to use The IOMPS is a line ...
Modular, Built-in, Local & Remote I/Os NEW! Ethernet-based Remote I/O Two Ethernet ports Slim modules – 12mm only Operating temperature range: -40°C to 70°C Supporting analog modules ...
4x SDCI ports (Single-Drop Digital Communication Interface) according to IEC 61131-9 (IO-Link) Enables the connection of up to 4 intelligent SDCI sensors or SDCI actuators All SDCI ports can also be configured ...
SIGMATEK GmbH & Co KG
• Full quality 4K@60p 4:4:4 on a single cable • Rugged modular design • One DisplayPort 1.2 connector • Supports up to 4K60p • HDCP 1.4 Compliant • EDID support for VESA/CEA, and custom timings • Automatic ...
Decentralized peripherals for every application: Boasting more than 500 I/O modules, programmable controllers and fieldbus couplers, WAGO’s remote I/O system offers all the functions required for your ...
WAGO
With its well thought-out details and a sophisticated ergonomic design, the X20 System is more than a remote I/O system, it is a complete control solution. Depending on the user's demands and individual application requirements, ...
B&R Industrie-Elektronik
The Astronics 1260-14 Digital I/O Switch Card provides 96 open collector channels in 12 groups of eight bits each. With the open collector version each independent group can utilize a separate internal or external pull-up ...
Hitachi´s newest Remote I/O series provides the best support on future oriented and enhanced application.The strength of this series is the flexibility by gathering machine information within decentralized applications ...
Hitachi Europe GmbH
... with CPSN-MCB271-S1-041 model only I/O module expansion With this product, you can freely add I/O modules to match the necessary functions from among the varied collection of CONPROSYS nano ...
CONTEC
... independent of the controllers and I/Os used. The MultiFieldbus is therefore also the solution if an application is to be set up with different controllers (fieldbuses) and the I/O system is to continue ...
Siemens Safety Integrated
... 0.1 % of full scale rating @ 25 °C Ranges - 0 to 10 VDC, -10 to +10 VDC, 0 to 20 mA, 4 to 20 mA, -20 mA to +20 mA Digital IO Update time - 1 ms with one channel, 6 ms with all channels
Beijer Electronics, Inc.
For the connection of 1 circuit of potential-free make-or-break contact for the indication of technical states (e.g. door or ventilation control) or for alarm actuation (e.g. sprinkler alarm). 1 input for potential-free contact. Input ...
Siemens Fire Safety
... expand the digital and analog I/O of ABB’s Relion® series protection relays, provide I/O for the station automation device COM600 using IEC 61850 communication and Grid Automation applications The ...
... Fully-isolated I/O Application Flexibility •Handles diverse I/O configurations including analog 4-20 mA, 0-5 V or 0-10 V and digital 5-36 VDC •Long range wireless communication up to 30 miles (900 ...
Application range (zones): 1, 2 Ex interface zone: 0, 1, 2, 20, 21, 22 Max. voltage Uo: 24.40 V AT_ST00589: no Highlights - Eight channels can be used individually as inputs or outputs Intrinsically safe Ex ia IIC inputs/outputs ...
R. STAHL AG
... communication offering for H Series ISO and H Series Micro valves and is suitable for use with many PLC's. I/O options are digital and analog I/O, 16 / 32 solenoid control, short circuit protection on ...
Parker Pneumatic Division Europe
Get multivariable outputs and a powerful configuration and maintenance interface in a convenient, easy-to-install package. This smart module provides fast access to flow, density, temperature and many other parameters. Features ...
Please specify:
Help us improve:
remaining