Flow: 31 m³/h
Pressure: 8 bar
Head: 62 m
Wide range of pumps for domestic and industrial applications.
LOWARA
Flow: 0.6 m³/h - 158.9 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: -10 °C - 140 °C
... designed lobes. The pump is authorized to carry 3-A symbol. Note: Consult the options of the pumps authorized to carry 3-A symbol. The SLR pump is a bare shaft rotary lobe pump. ...
INOXPA
Flow: 1,000 m³/h
Pressure: 10 bar
Head: 295'00"
The DIN-FOOD pump is a hygienic high capacity centrifugal pump (up to 1000 m³/h) designed to cater for an unfulfilled need in the food-processing and chemical and pharmaceutical industries. The applications ...
INOXPA
Flow: 2.4 m³/h - 45 m³/h
Pressure: 12, 6 bar
Fluid temperature: 85 °C
Kiber KS progressive cavity pumps are used to transfer products of low and high viscosity as well as products containing soft particles. They are also recommended for use with edible oils, wine, concentrates and beverages ...
INOXPA
KGL series servo screw platen pump realizes precise glue supply and metering of the system based on the technical principle of eccentric screw valve, and is suitable for various single and two-component glues from high ...
... saving and noise reduction Compared with the traditional pneumatic platen pump, the servo screw platen pump can save energy by more than 300%. The servo screw platen pump runs more ...
Flow: 104 m³/h
Head: 36 m
Power: 7,500 W
• PP materials, PVDF • Connections DIN EN ISO 9906 Dry-run safe close coupled sump pump Highest operational safety because of bearing-less design partly suitable for particle loaded fluids Tailor-made mounting plates ...
DIVATEC,SL
Flow: 80 m³/h
Head: 27 m
Power: 180 W - 7,500 W
... seals • Materials PP-GF, PVDF • Height up to 65m • Engine coated corrosive EPOXI paint Type of construction • Horizontal pump with hermetic seal and magnetic coupling, with special bearing pair, suitable for dry ...
DIVATEC,SL
Flow: 1,000 m³/h
Pressure: 16 bar
• PP, PVDF, PTFE materials • For large pumps • PN16 • ISO 2858 / DIN EN 22858 connections • For fluids with solids X-CLASS is the beginning of a new generation of powerful heavy-duty plastic pumps. Based ...
DIVATEC,SL
ALLDOO Micropump | Micro Diaphragm Pumps
... ,12VDC and 24VDC micro diaphragm vacuum pumps,gas pumps,water pumps,self priming liquid pumps and long lasting DC brushless motor micropumps,provides ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 5 l/min
Pressure: -700 mbar - 2,000 mbar
Length: 30 mm
CMP30 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical Features: 1.Uncontaminated ...
ALLDOO Micropump | Micro Diaphragm Pumps
air MAGNETIC DIAPHRAGM pump Spec Type:Aeration Pipe,Areator,Other air pump:air MAGNETIC DIAPHRAGM pump Key Features * Low Noise * High Durability * No Lubrication Necessary * ...
Mohno screw pump Key Features Working Principles: Mohno Pump is a container type pump with a single shaft , turning eccentrically; it is composed of a rotor and a stator. The rotor ...
CEMO
Hand pump 25 l/stroke Order-number: 1452 Details Hand pump, accessories for UNI- and MULTI-Tank, pumps and accessories specially adapted for DWT diesel filling stations -robust ...
CEMO
Steel drum-pump Order-number: 7892 Details Hand pumps for diesel and lubricants -robust construction -no energy source required -low-cost -2” connector -suction tube can be ...
CEMO
Power: 1,400 W
Length: 195 mm
Width: 195 mm
Magnetic pump • Total dimensions L x W x H: 195 x 195 x 355 mm • Power: 1400 W • Alloy capacity: 8 Kg • Maximum PCB dimensions: 160 x 500 mm • Maximum temperature: 300 ° C • Heating time: 1h Pot of ...
HIGH VISCOSITY MATERIAL FEEDING PUMP THIN MEDIUM FEEDING PUMP SANITARY FEEDING PUMP HEAT PRESERVATION SLEEVE DESIGN WATER CLEANING MECHANICAL SEAL AVAILABLE ALMOST HAVE ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Lobe pump is widely used to transfer high viscosity liquid and semi-solid liquid. Lobe pump can transfer sauce, cream,food, cosmetic, pharmaceutical liquid,mayonnaise,syrup,meat paste and so on. Rotor ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Stainless steel pneumatic diaphragm pump Brief introduction The stainless steel pneumatic diaphragm pump uses compressed air as the power source, which can be used in various complex working conditions ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 35 l/h
Pressure: 903 bar
The “V” Series pump is a range of compact, self-contained, pneumatic metering pumps suitable for injecting a wide variety of chemicals that range from 0.07 gph to 9 gph (0.27 lph to 34 lph) and pressures ...
Williams Milton Roy
Flow: 111.66965, 2, 5 l/h
Pressure: 3,000, 2,500, 1,600 psi
Weight: 12.2, 55.1, 62.1 kg
WILROY Series Hydraulic Diaphragm Pump The WILROY metering pump is a unique blend of Williams and Milton Roy pump technology The WILROY is a pneumatic-hydraulically actuated diaphragm ...
Williams Milton Roy
Flow: 2.8 l/h - 170.3 l/h
Pressure: 5.17 bar - 6.54 bar
Weight: 2.7 kg - 5.2 kg
Low Pressure Diaphragm Pumps The CLD Pneumatic diaphragm metering pump consists of a liquid chamber and an air chamber separated by a diaphragm The CLD is a pneumatic driven low-pressure diaphragm ...
Williams Milton Roy
Head: 60 mm - 260 mm
Power: 250, 120, 60, 180 W
... ) : 60 • Weight (Kg) : 2 • Packaging (mm) : 25X25X30 • Draught (mm) : 60 The continuos service self-priming electric pumps are suitable for continuos coolant flow and assure absolute operating safety even at high temperatures.
Flow: 0.8 l/min - 5 l/min
Fluid temperature: 0 °C - 45 °C
Length: 112 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Flow: 2 l/min
Length: 112 mm
Width: 37 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Flow: 1 l/min - 300,000 l/min
Length: 112 mm
Width: 37 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Pressure: 10 bar
Fluid temperature: 60 °C
Weight: 600, 720 g
A, AD Type Modern and compact oil burners pump, designed to pump fuel from the tank to the burner nozzle, at the required pressure. The A – AD type pump is made of a ...
Elettromeccanica Delta S.p.A.
Flow: 1 m³/h - 66 m³/h
Head: 3.5 m - 114 m
Power: 0.37 kW - 9.2 kW
... centrifugal pumps; electric motor with extended shaft directly connected to the pump. NM: single-impeller. NMD: with two back-to-back impellers (with axial thrust balancing). Connections : threaded ports ...
Calpeda
Flow: 0 m³/h - 80 m³/h
Pressure: 0 bar - 28 bar
The Fristam Centrifugal pumps FM enable effortless pumping at high pressures. They are designed to suit higher pressure loads. Technical briefs: The pumps are manufactured in three sizes that last ...
FRISTAM
Flow: 20 m³/h - 180 m³/h
Pressure: 20, 25 bar
When developing this exceptional pump, we intended to set new standards in double-screw technology. We started by rethinking functional principles from the ground up and eliminated previously known deficiencies typically ...
FRISTAM
Based on the proven centrifugal pumps of the Fristam FP range, the shear pump has a new, efficient mixing method. A rotor/stator system which operates at tip speeds of up to 38 m/s is utilized instead ...
FRISTAM
... high-powered, self-priming transfer pump achieves up to 200 gpm (757 lpm) and 58 psi (4.0 bar). The series includes 1542P-55SP, 1542P-65SP, 1542P-65ESP, 9342P-HM1C-5SP, and 9342P-HM5C-5SP. Key Features Close-coupled, ...
Hypro Pressure Cleaning
... centrifugal pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids: water, insecticides, herbicides, wettable powders, emulsives, liquid fertilizers, etc. Series ...
Hypro Pressure Cleaning
... self-priming centrifugal pumps handle big, high-capacity spraying jobs and tank filling with ease. They offer outstanding performance without the need for a flooded suction inlet. The pumps are ideal ...
Hypro Pressure Cleaning
Flow: 1,700 us gal/h - 8,000 us gal/h
Rule your dewatering! Backed by the Rule brand of DC pumps, a brand enjoying over 45 years of operational excellence, the Evacuator series is a new line of high efficiency portable utility pumps. Providing ...
RULE INDUSTRIES
Flow: 0 us gal/min - 178,000 us gal/min
Head: 0'00" ft - 152'00"
Axial Mixed Flow Pumps Vertical, wet pit design pump for Circulating Water Service (including condenser). Specifically designed for the nuclear industry, it features a number of hydraulic designs, and ...
Hayward Tyler®
Flow: 0 us gal/min - 3,000 us gal/min
Head: 0'00" ft - 500'00"
... Hayward Tyler End Suction Pumps are ideal for the following applications: Safeguard Pumps ASME Section III Class 2 Seal water injection pumps Decay heat pumps ...
Hayward Tyler®
Flow: 0 us gal/min - 50,000 us gal/min
Head: 60 m - 210 m
Design Features of Hayward Tyler Vertical Turbine Pumps The VS range was designed specifically for the nuclear industry and offers three different impeller types. Each impeller type provides a different head-capacity ...
Hayward Tyler®
Flow: 10 m³/h - 20,000 m³/h
Head: 3 m - 300 m
PRODUCT FEATURES Expect more with the improved design and above standard, standard materials options of the e-XC split-case pump: Xylem's proprietary mechanical seals - carbon/silicon carbide seal with an EPDM elastomer ...
Jabsco
Pressure: 275 bar
Ideally suitable for the automatic grease lubrication of all types of industrial machines and as a chassis lubrication pump for trucks, trailers, buses, construction and mechanical handling vehicles. ...
I.L.C. srl
Flow: 0 m³/h - 50 m³/h
Pressure: 0 bar - 6 bar
... of the pump from the piping system. Thereby, WANGEN BIO-FEED is also suitable for use in restricted spaces. Due to the pushing of the screw connection, WANGEN BIO-FEED turns into a high-performance suction pump. ...
WANGEN Pumpen
Flow: 0 m³/h - 102 m³/h
Pressure: 0 bar - 6 bar
self-priming pump Type WANGEN Xpress The changing of wear parts with very few actions, without removing the pump from the pipeline system thanks to Service in Place. The WANGEN Xpress pump ...
WANGEN Pumpen
Flow: 0 m³/h - 560 m³/h
Pressure: 0 bar - 12 bar
Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign ...
WANGEN Pumpen
Flow: 0.03 m³/h - 180 m³/h
Pressure: 24 bar
PCM Ecomoineau™ M is the most compact progressing cavity pump (PCP) available on the market today. Its revolutionary design combines the legendary performance and reliability of PCM PCP technology with ...
PCM
Flow: 1 m³/h - 100 m³/h
Pressure: 0 bar - 260 bar
PCM pumps are easy to order, delivered fast, simple to operate and incredibly reliable. PCM Oil & Gas transfer pumps combine the legendary performance and reliability of PCM progressing ...
PCM
Flow: 0 m³/h - 55 m³/h
Pressure: 0 bar - 24 bar
... progressing cavity pump is a culmination of our unrivalled industry expertise and our unwavering commitment to provide the best fluid handling solutions. PCM Moineau™A pumps meet all ...
PCM
Flow: 103 m³/h
Pressure: 34 bar
The enhanced design of Ampco’s patented ZP3 series positive displacement pumps is now leading the industry. It sets the standard for PD circumferential piston pump technology with a simplified yet state-of-the-art ...
... can be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic. Accuracy within ± 1% within 10-100% of ...
Doseuro S.r.l.
Flow: 44 l/h - 3,569 l/h
Pressure: 40 bar - 250 bar
... be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic. Accuracy within ± 1% within 10-100% of rated ...
Doseuro S.r.l.
Flow: 44 l/h - 3,569 l/h
Pressure: 50 bar - 250 bar
Positive Return Sandwich Hydraulic Diaphragm Pump SDI Sandwich Hydraulic diaphragm dosing pumps comply with mechanical and performance API 675 standards. Furthermore they comply with ATEX standard, ...
Doseuro S.r.l.
Flow: 0 l/h - 700 l/h
Head: 5.4 m
Power: 115 W
The totally re-designed Sauermann Si-83 Tank Pump represents an in-class breakthrough for condensate removal technology. This revolutionary condensate removal solution has been reimagined from the inside-out to be more ...
Sauermann
Please specify:
Help us improve:
remaining