AIGNEP oil solenoid valves

DN: 0.25 in - 0.5 in
Voltage: 24 V - 240 V
Temperature: -10 °C - 130 °C

TECHNICAL SPECIFICATIONS Media: water, oil, air Media temperature: -10°C ÷ +90°C Ambient temperature: -10°C ÷ +50°C Body material: brass (CW617N EN 12165) Operator material: stainless steel Operator seal material: FKM Seal ...

DN: 10 mm - 75 mm
Voltage: 230 V
Temperature: -5 °C - 120 °C

SPECIFICATIONS : Sizes 10mm (3/8") to 75mm (3") End Connections Standard-BSP, Optional-NPT. Construction-Body Upto 20mm (3/4") Brass Forged IS 6912 and above in SS ASTM A351 Gr. CF8 ...

Voltage: 12 V - 230 V

... PE400, PQ60 and PQ120 series. NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached to valves if desired. NOTE: Valves are shipped without control switch.

DN: 12 mm - 50 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 160 °C

... Irrigation Air and Gas Management Automation and Industrial controls Industrial ovens Compressors Mould Temperature Control Light oil management

DN: 15 mm - 100 mm
Voltage: 220, 24 V
Temperature: -50 °C - 100 °C

Designed for operation as a shut-off valve with remote and manual(reserve) actuation, intended for use on oil and gas pipelines. Applied to provide security at stationary process systems of CNG fuel ...

DN: 1, 1.5, 2, 3, 3.5 mm
Voltage: 24 V
Temperature: -196 °C - 50 °C

... flow, resistant to low temperature, and flexible mounting. Working Principle KLPV-HP proportional solenoid valve is a direct acting proportional valve, where the extent of the internal ...

DN: 0.25 in - 2 in
Voltage: 220 V
Temperature: -10 °C - 150 °C

... PROVAL S100 Series general purpose solenoid valves are used in water, air, oils and other industrial applications limited with the diaphragm material and pressure range. Viton (FKM) diaphragms ...

Voltage: 12 V - 220 V

OPERATION 2/2-ways. Direct acting. Normal position port 1-2 closed. When the coil is energized, 1 - 2 opens. Valve closes by spring return. MATERIAL Body: Brass, stainless steel Internal parts: Stainless steel Sealing: ...

STBL Two-way Small Proportional Solenoid Valve Oriifce: 1.0-4.0mm Working medium: water, air, water vapor, oil, natural gas Removable maintenance Seals: NBR, Viton, EPDM... Chatacteristic: Working ...

Voltage: 12, 24 V
Temperature: -30 °C - 50 °C
Pressure: 210 bar

... selection valve can be realized in the different flow pressure between the oil road switch. Multiple directional valves can be connected to feed oil into or out of ...

DN: 1.2, 1.5, 2, 2.5, 3.1 mm
Voltage: 12, 24, 110, 220 V
Temperature: -10 °C - 140 °C

Solenoid valves for industrial applications - W Series The W series solenoid valves, offered by SENGA, are recommended for use in the industrial and pneumatic sectors. ...

DN: 10 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C

... electromagnetic valves are operating on digital principle. Because of this they have two states – when to the electromagnet (coil) is supplied electrical signal and when the valves are ...

Temperature: -30 °C - 65 °C
Pressure: 0 bar - 350 bar

3/2-way solenoid seat valve Screw-in cartridge valve: direkt acting; flow at port 1 is blocked in de- energized position; allows flow from 2 -> 3; In the energized position flow is ...

DN: 12 mm
Temperature: -10 °C - 80 °C
Pressure: 16 bar

NC DIFFERENTIAL PRESSURE SOLENOID VALVE Differential pressure solenoid valves Applications : Air, water, inert gas, oil and other gases/liquids compatible ...

Pressure: 21,000,000 Pa

The Ponar Silesia 2URES 6 is a Hydraulic cartridge solenoid valve constructed in size 6 framework and can exhibit a maximum pressure of up to 21 MPa with flow rate of up to 40 dm3/min. This valve ...

DN: 16 mm
Voltage: 24, 12, 120 V
Temperature: 150, 80 °C

... 1325 with three-way solenoid valves are obtainable in metal or 304 stainless steel bodies. You have an option to seal and seat materials, including Acrylo-Nitrile and Viton® fulfill numerous general ...

Voltage: 24 V
Pressure: 0 bar - 207 bar

connecting threads: 1/2" female, inlet/outlet: 90° max. flow: 35 l/min.