- Hydraulics - Pneumatics >
- Valve >
- Pneumatic valve >
- AIGNEP
AIGNEP pneumatic valves
... Mounted Ball Valve With Pneumatic Actuator The smallest the fluid resistances among all valves even reduced-bore ball valves have relatively small fluid resistance. ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
DN: 4 in
The Liquip LBV450VGL Butterfly Valve has a lightweight and durable design that enables it to provide and control full flow through pipelines fitted with 100-mm (4”) Tank Truck Manufacturers Association (TTMA) flanges. Features ...
Pressure: 150,000 Pa - 1,000,000 Pa
... at the bottom of water cup for auto dischargers, air filters and air filter regulators and can auto discharge the condense water gathered in the water cup. Feature Auto draimer Manual Drain Air ...
XHnotion
DN: 15 mm - 100 mm
Model No.: CQ100-Socket, CQ200-Thread, CQ300-Flanged Specifications: Body Material:UPVC,PP,CPVC,PVDF Seat:PTFE(TEFLON) O-Ring:EPDM,VITON(FPM) Size: DN15(1/2")~DN100(4") Standard: JIS,ANSI,DIN
DN: 0.5 in - 2 in
Pressure: 250 psi
Temperature: 70 °F
... automated PMD pneumatic actuator unit along with the TB series ball valve. It is a double acting air-to-open and close that comes with a soleniod valve with optional voltages. The FPM ...
Hayward Industries, Inc.
The KRV reverse valve controls the air flow and is typically used in external vacuum generator systems. The valve can also be included in side-channel blower kits recommended for most ...
DN: 0.125 in
Pressure: 70 psi - 300 psi
... Adjustable Needle Valve is a pneumatically triggered single-acting valve that can be used with an internal spring close (single action) or may be connected for air closing without the ...
TECHCON SYSTEMS
DN: 15 mm - 800 mm
Pressure: 16 bar - 420 bar
Temperature: -100 °C - 720 °C
GUIDED SPHERE VALVE METAL SEAT WIDE RANGE The KTN SAT is the best KTN design to solve the widest range of applications. The main goal of this design is its philosophy of achieving the highest security using unmatched ...
KTN
DN: 2 in - 88 in
Pressure: 10 bar - 160 bar
Temperature: 815 °C
... laminations and the metal seat makes the series TRI-CON to an allrounder for many different industrial applications. Zwick valves are used for industrial and exhaust gases, liquids, hot water or steam at lowest as ...
Zwick Armaturen GmbH
... normally used as a proportional slide gate. This modular gate allows the installation of various drive configurations - manual, pneumatic, or electric motor driven - on the same base frame. Grain size up to 8 mm High ...
Stanelle Silos + Automation GmbH
... hydraulic or pneumatic pressure. The valve will be operated by a pressure reducing pilot valve to achieve constant outlet pressure, regardless of upstream pressure or flow variations. ...
Dorot Control Valves
DN: 50 mm - 2,000 mm
Through conduit knife gate valve with through going gate. The valve body is composed by two body parts that are bolted together. This valve is bidirectional with equal maximum Dp resistance ...
C.M.O.
DN: 25 mm - 100 mm
Pressure: -1 bar - 10 bar
Temperature: -80 °C - 200 °C
The Aseptic valve functions primarily for food or pharmaceutical processing. It is suitable for direct installation in tanks and reactors preparation. Aseptic valves can be manual or pneumatic, ...
AERRE INOX Srl
DN: 50 mm - 400 mm
Pressure: 5, 6, 7, 8, 10 bar
Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, ...
Watergates GmbH & Co. KG
DN: 50 mm - 600 mm
Pressure: 6, 8, 3, 4, 10 bar
Temperature: 230, 120, 200, 105 °C
... steel shut-off-valves are not necessary available in various seal types areas of application: one part gate valve for industrial use nominal diameters:DN 50 - 600 (2 - 24") material:ductile ...
Lohse GmbH, Maschinenbau
DN: 0.125, 0.25, 0.5, 0.75 in
Pressure: 0 psi - 125 psi
Temperature: -20 °F - 225 °F
Humphrey offers you a variety of air piloted valves within the unique construction of the classic Diaphragm-Poppet Series. Choose diaphragm-poppet valves for your difficult, critical ...
Humphrey Products
DN: 40 mm - 300 mm
Temperature: -20 °C - 90 °C
... NBR -20°C / + 90°C. • MAXIMUM WORKING PRESSURE W/ACTUATOR: Please refer to manual valve. For general applications and special executions, see the manual valve.
EFFEBI
DN: 25 mm - 300 mm
Pressure: 40 bar
Temperature: 250 °C
... grade EPDM-90 O-ring and MP bearing. This control valve assembly includes a high temperature pneumatic actuator in order to withstand the heat through radiation. This combination enables our valves ...
Ramén Valves AB
DN: 0.25 in - 4 in
Temperature: -40 °F - 302 °F
... assembled into the valves. 8P valves are designed to operate with a minimum of 80 PSI air supply. The technological advancement of superior stem sealing and the O-ring back seat ...
DN: 50 mm - 600 mm
Use : Handling used/Gate used for the handling of solids (ganular, pulverulents…), and main application in exit of silo. Body shape : Wafer Type : 1511 Tightness: Metal/metal Face to face : According to manufacturer standard Operation ...
INTERNATIONAL FLUIDES CONTROLES
Pressure: 10 bar
Temperature: 150 °C
... request. Internal Assembly The internal assembly includes two valve seat seals by default. Valve seat A can be executed either with a shrunk or screwed valve seat seal, whereas valve ...
GEA Procomac S.p.A.
Feeding and metering slide gate series is specifically designed for gravity-flow applications. The variable slide gate actuation setting enables fractional material flow and full-open or closed formats. It is constructed with carbon steel-infused ...
DN: 0.25 in - 0.5 in
Pressure: 980,000 Pa
Temperature: -10 °C - 150 °C
... epoch-making combination valve that enables manual flow control and fully on/fully off two-stage control by means of an air actuator. -The control of the fluid by means of a diaphragm rather than a ...
KITZSCT
DN: 655 mm
Pressure: 1.2 bar
Temperature: 50 °C - 120 °C
... dust. It's vailable with ISO 250 flanges in sizes 10" and can be operated in pneumatic or APC mode. This vacuum valve is usually designed as a gate valve or a pendulum valve, ...
Highlight Technology Corp.
DN: 100 mm - 400 mm
Aluminum butterfly valve for handling powders available from Ø100 to Ø400 mm. The valve can be supplied for hot materials with manual lever or pneumatic drive.
SCUTTI
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining