Pneumatic valves

Pressure: 150,000 Pa - 1,000,000 Pa

... at the bottom of water cup for auto dischargers, air filters and air filter regulators and can auto discharge the condense water gathered in the water cup. Feature Auto draimer Manual Drain Air ...

DN: 15 mm - 100 mm

Model No.: CQ100-Socket, CQ200-Thread, CQ300-Flanged Specifications: Body Material:UPVC,PP,CPVC,PVDF Seat:PTFE(TEFLON) O-Ring:EPDM,VITON(FPM) Size: DN15(1/2")~DN100(4") Standard: JIS,ANSI,DIN

DN: 0.5 in - 2 in
Pressure: 250 psi
Temperature: 70 °F

... automated PMD pneumatic actuator unit along with the TB series ball valve. It is a double acting air-to-open and close that comes with a soleniod valve with optional voltages. The FPM ...

The KRV reverse valve controls the air flow and is typically used in external vacuum generator systems. The valve can also be included in side-channel blower kits recommended for most ...

DN: 0.125 in
Pressure: 70 psi - 300 psi

... Adjustable Needle Valve is a pneumatically triggered single-acting valve that can be used with an internal spring close (single action) or may be connected for air closing without the ...

DN: 15 mm - 800 mm
Pressure: 16 bar - 420 bar
Temperature: -100 °C - 720 °C

GUIDED SPHERE VALVE METAL SEAT WIDE RANGE The KTN SAT is the best KTN design to solve the widest range of applications. The main goal of this design is its philosophy of achieving the highest security using unmatched ...

DN: 2 in - 88 in
Pressure: 10 bar - 160 bar
Temperature: 815 °C

... laminations and the metal seat makes the series TRI-CON to an allrounder for many different industrial applications. Zwick valves are used for industrial and exhaust gases, liquids, hot water or steam at lowest as ...

... normally used as a proportional slide gate. This modular gate allows the installation of various drive configurations - manual, pneumatic, or electric motor driven - on the same base frame. Grain size up to 8 mm High ...

... hydraulic or pneumatic pressure. The valve will be operated by a pressure reducing pilot valve to achieve constant outlet pressure, regardless of upstream pressure or flow variations. ...

DN: 50 mm - 2,000 mm

Through conduit knife gate valve with through going gate. The valve body is composed by two body parts that are bolted together. This valve is bidirectional with equal maximum Dp resistance ...

DN: 25 mm - 100 mm
Pressure: -1 bar - 10 bar
Temperature: -80 °C - 200 °C

The Aseptic valve functions primarily for food or pharmaceutical processing. It is suitable for direct installation in tanks and reactors preparation. Aseptic valves can be manual or pneumatic, ...

DN: 50 mm - 400 mm
Pressure: 5, 6, 7, 8, 10 bar

Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, ...

DN: 50 mm - 600 mm
Pressure: 6, 8, 3, 4, 10 bar
Temperature: 230, 120, 200, 105 °C

... steel shut-off-valves are not necessary available in various seal types areas of application: one part gate valve for industrial use nominal diameters:DN 50 - 600 (2 - 24") material:ductile ...

DN: 0.125, 0.25, 0.5, 0.75 in
Pressure: 0 psi - 125 psi
Temperature: -20 °F - 225 °F

Humphrey offers you a variety of air piloted valves within the unique construction of the classic Diaphragm-Poppet Series. Choose diaphragm-poppet valves for your difficult, critical ...

DN: 40 mm - 300 mm
Temperature: -20 °C - 90 °C

... NBR -20°C / + 90°C. • MAXIMUM WORKING PRESSURE W/ACTUATOR: Please refer to manual valve. For general applications and special executions, see the manual valve.

DN: 25 mm - 300 mm
Pressure: 40 bar
Temperature: 250 °C

... grade EPDM-90 O-ring and MP bearing. This control valve assembly includes a high temperature pneumatic actuator in order to withstand the heat through radiation. This combination enables our valves ...

DN: 0.25 in - 4 in
Temperature: -40 °F - 302 °F

... assembled into the valves. 8P valves are designed to operate with a minimum of 80 PSI air supply. The technological advancement of superior stem sealing and the O-ring back seat ...

DN: 50 mm - 600 mm

Use : Handling used/Gate used for the handling of solids (ganular, pulverulents…), and main application in exit of silo. Body shape : Wafer Type : 1511 Tightness: Metal/metal Face to face : According to manufacturer standard Operation ...

Pressure: 10 bar
Temperature: 150 °C

... request. Internal Assembly The internal assembly includes two valve seat seals by default. Valve seat A can be executed either with a shrunk or screwed valve seat seal, whereas valve ...

Feeding and metering slide gate series is specifically designed for gravity-flow applications. The variable slide gate actuation setting enables fractional material flow and full-open or closed formats. It is constructed with carbon steel-infused ...

DN: 0.25 in - 0.5 in
Pressure: 980,000 Pa
Temperature: -10 °C - 150 °C

... epoch-making combination valve that enables manual flow control and fully on/fully off two-stage control by means of an air actuator. -The control of the fluid by means of a diaphragm rather than a ...

DN: 655 mm
Pressure: 1.2 bar
Temperature: 50 °C - 120 °C

... dust. It's vailable with ISO 250 flanges in sizes 10" and can be operated in pneumatic or APC mode. This vacuum valve is usually designed as a gate valve or a pendulum valve, ...

DN: 100 mm - 400 mm

Aluminum butterfly valve for handling powders available from Ø100 to Ø400 mm. The valve can be supplied for hot materials with manual lever or pneumatic drive.

DN: 1, 0.375, 0.5, 0.25 in

iPolymer Water Valve (WV) is manufactured in three material choices: PVC, Polypropylene, or PVDF. The valve has a spring return and is pneumatically actuated to open ...

PDA Pneumatic Control Valves allow for direct remote control of individual friction modules simultaneously on a brake. Brake friction modules can turned on or off from the PDA to set brakes to run ...