DN: 15 mm - 100 mm
... Model No.: CQ100-Socket, CQ200-Thread, CQ300-Flanged Specifications: Body Material:UPVC,PP,CPVC,PVDF Seat:PTFE(TEFLON) O-Ring:EPDM,VITON(FPM) Size: DN15(1/2")~DN100(4") Standard: JIS,ANSI,DIN ...
DN: 0.125 in
Pressure: 70 psi - 300 psi
... Adjustable Needle Valve is a pneumatically triggered single-acting valve that can be used with an internal spring close (single action) or may be connected for air closing without the spring (double acting). The ...
TECHCON SYSTEMS
DN: 50 mm - 2,000 mm
... Through conduit knife gate valve with through going gate. The valve body is composed by two body parts that are bolted together. This valve is bidirectional with equal maximum Dp resistance from both ...
C.M.O.
DN: 40 mm - 300 mm
Temperature: -20 °C - 90 °C
... NBR -20°C / + 90°C. • MAXIMUM WORKING PRESSURE W/ACTUATOR: Please refer to manual valve. For general applications and special executions, see the manual valve. ...
EFFEBI
Feeding and metering slide gate series is specifically designed for gravity-flow applications. The variable slide gate actuation setting enables fractional material flow and full-open or closed formats. It is constructed with carbon steel-infused frame ...
DN: 2 in - 24 in
... iron body. Series 1100 (Split Body, Resilient Seated Butterfly Valve) Our resilient seated butterfly valve is our most commonly sold butterfly valve. This series butterfly valve ...
Valtorc
... simple in construction. Suitable for most of service requirement. The actuator for P2/J2 series can be QLM series sliding pneumatic type or EML series electric type. P2/J2 series are also available with bonnet extension type, bellows ...
Wuxi Smart Auto-control Engineering Co., Ltd.
... The material regulator valve (MVR) is an air operated valve that slides. The MVR Valve has a tapered needle and specially designed fluid ports to permit precise regulation ...
Pressure: 700 psi
... The Copeland NXT Series is a balanced ported valve designed for high efficiency R-410A and R-454B air conditioning and heat pump applications. NXT Series valves operate over a wide range of conditions and applications ...
DN: 1.5 mm - 382 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 140 °C
... The Alfa Laval Sanitary Ball Valve (SBV) is a hygienic ball valve designed with a bore diameter the same size as the pipeline diameter. The full-bore design with zero flow restriction and minimum pressure drop makes the ...
Alfa Laval
DN: 0.5 in - 2 in
... off, floating, or proportional control If actuator is supplied, it is not mounted, allowing access to sweat end connection Valve connection types: threaded, sweat and press fit ...
DN: 50 mm - 550 mm
Pressure: 600 bar
Temperature: 650 °C
... steam systems. Design: High-pressure weld-end gate valve with pressure-seal bonnet, forged body from carbon steel, non-rotation stem, wedge-type. Actuators: Hand wheel, electric, pneumatic, hydraulic. Technical ...
DN: 0.15 mm - 0.25 mm
Pressure: 10 bar
Temperature: 2 °C - 93 °C
... Parker's polypropylene ball valves corrosion resistant design make them ideal for water filtration units, coffee and beverage machines and various other fluid applications. Parker's polypropylene ball valves save cost ...
Watts Fluid Air
DN: 50 mm - 150 mm
Pressure: 0 bar - 25 bar
Temperature: 0 °C - 230 °C
... Self-draining, easy-to-clean bottom outlet valve CleanValve from De Dietrich is a high-performance bottom outlet valve designed for glass-lined, stainless steel, and nickel alloy reactors and tanks. Its self-draining ...
DN: 0.25, 0.5, 0.75 in
Pressure: 0 bar - 5.5 bar
Temperature: 0 °C - 95 °C
... Furon Q- Valve Pneumatic Valves from Saint-Gobain are cost-effective, high-performance products used for semiconductor processing. They are compatible with most common installations, and drop-in replacements ...
Pressure: 14 bar
Temperature: 49 °C
Flow rate: 5 ft³/min - 35 ft³/min
... With the Hankison By-Pass Valve you can service your system components and still use the system. The By-Pass Valve eliminates the expensive installation costs and space limitations of conventional three valve ...
Pressure: 100, 500, 1,000 bar
... High-pressure valve In addition to the technical challenges in pressure generation, applications in high-pressure technology often require special high-pressure valves with the desired properties which are only very ...
... shredder can be used upstream, in order to break up the chips to an extractable quality. Site of operation: - As a shut-off valve in the chip suction pipe system Weight: - ca. 20 kg Dimensions L x W x H: - 790 x 230 x 332 mm Outlet opening ...
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 10 bar
... In cooperation with HiP High Pressure Equipment, we offer an extensive range of valves — also known as high pressure valves. With pressures up to 10,000 bar (150,000 psi), we provide a suitable solution for every application. ...
DN: 15 mm - 400 mm
Pressure: 0.8 bar - 2.8 bar
... Control valves with pneumatic actuator -Flow control, mixing and distribution of liquids, steam and gases; two and three way -Steam desuperheating for pressure reduction and simultaneous cooling with water ...
DN: 0.75 in - 1.5 in
Pressure: 0.3 bar - 8.6 bar
Temperature: -20 °C - 85 °C
... diameter than the pilot valve orifice when so equipped). When the orifice is opened, the air in the upper chamber is exhausted, at a much faster rate than the speed of which air enters through the air ...
DN: 9.525 mm
Pressure: 10 bar
... Solenoid valve for compressed air. Brass and NBR. 1/2" (F). 24 V DC. Normally closed type. ...
DN: 7, 4 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
... PRESSURE SAFETY VALVE ► For maintaining the position of a double-acting cylinder if the operating pressure drops ► The valve consists of 2 check valves that are unlocked pneumatically ...
... POMTAVA valve is a pneumatic needle valve, closed at normal state and opened with pressurized air. The closing is done with a spring. Version VPT1-04S is designed with a bellows sealing which protects ...
... POMTAVA valve is a pneumatic needle valve, closed at normal state and opened with pressurized air. The closing is done with a spring. Made in stainless steel, o'ring in FFKM. Version 410-C is designed ...
the best suppliers