- Hydraulics - Pneumatics >
- Pump >
- Chemical pump >
- APV
APV chemical pumps
Flow: 4 l/min - 30 l/min
OTAL container pumps are characterized by its basic stopper system that can be used in most common containers. During the pumping process, only the tube comes in contact with the liquid. This means that liquids that are ...
Bürkle
Flow: 10 l/min
... solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction ...
Bürkle
Flow: 20 l/min
... air filters for ultra-pure drawing-off available as accessory Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE. Solvent pump foot operated ...
Bürkle
KGL series servo screw platen pump realizes precise glue supply and metering of the system based on the technical principle of eccentric screw valve, and is suitable for various single and two-component glues from high ...
... saving and noise reduction Compared with the traditional pneumatic platen pump, the servo screw platen pump can save energy by more than 300%. The servo screw platen pump runs more ...
Steel drum-pump Order-number: 7892 Details Hand pumps for diesel and lubricants -robust construction -no energy source required -low-cost -2” connector -suction tube can be ...
CEMO
Crank pump for AdBlue® / DEF / ARLA 32 Order-number: 10517 Details Crank pump for AdBlue® / DEF / ARLA 32, antl-freeze, water -solid construction for professional operation -housing in stainless ...
CEMO
Hand pumps for canisters Order-number: 10054 Details Hand pump for canisters up to 30 I -material: plastic, polypropylene and polyethylene -food-safe -double-action -outlet tubes ...
CEMO
Flow: 0 l/h - 700 l/h
Head: 5.4 m
Power: 115 W
The totally re-designed Sauermann Si-83 Tank Pump represents an in-class breakthrough for condensate removal technology. This revolutionary condensate removal solution has been reimagined from the inside-out to be more ...
Sauermann
Flow: 0 l/min - 1.5 l/min
Fluid temperature: -60 °C - 120 °C
Length: 210 mm
... tubing size based on the following chart. Support manual mode Support fully automatic cycle Semi-automatic cycle Manual start/stop Speed control Basic Parameters Current: 2A max Pump ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.12 l/min - 1.52 l/min
Small volume, high flow Easy to replace the pump tube Stainless steel rotor, long life Stepper motor, precise control Suitable for viscous and non-viscous liquid transfer The wall thickness of the ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.001 l/min - 0.485 l/min
Pressure: 0 bar - 2 bar
Head: 2 m
... 485ml/min.(For intermittent work only) 300RPM supports continuous working mode Easy to operate, can quickly replace the pump tube; High precision, low noise, simple structure, maintenance-free Two tube clamp ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.002 l/min - 1 l/min
Power: 20 kW
Length: 190 mm
SP 311 Peristaltic Pumps Peristaltic pumps ideal for transferring gas, liquids, mixtures and emulsions in various industries. Easy to use and Reliable • Minimum maintenance (just replace the tube) • ...
Flow: 45 l/min
Pressure: 2 bar - 6 bar
Input diameter: 1.5 in
... supply / transfer with recirculation PUMP PERFORMANCE Ratio: - 8:1 b Max cycles / minute: - 60 Displacement per cycle: - 757 civil code Air consumption @ 6 bar: - 2700 Nlpm PUMP SPECIFICATIONS Lower ...
Flow: 15, 19, 10, 13 l/min
Power: 12, 8.5, 11 W
Length: 105 mm
... Type Built-in use • Air mat, air bed (continuous air exhaust) • Air bearing • For burner (air supply) • Scientific & chemical instruments (analysis and agitation)
Flow: 17, 13 l/min
Pressure: -35,000 Pa - 35,000 Pa
Power: 8, 11 W
Pressure & vacuum Type Built-in use *No power plug included because it is designed for built-in use. *Rubber-made legs are sharp-pointed. Not for self-standing installation. • Air mat, air bed (continuous air ...
Flow: 2,800 m³/h
Fluid temperature: 180 °C
... thermal shock. The CUP-BB5V range has been designed to produce an advanced pump with reduced whole life costs. All the pump internals can be withdrawn quickly without disturbing pump ...
CELEROS
Reciprocating Pumps Product Category: RECIPROCATING PUMPS Reciprocating power pumps are designed with exceptional versatility to efficiently. These units are driven via electric ...
CELEROS
Flow: 760 m³/h
... duplex (direct acting) Product Category: RECIPROCATING PUMPS Reciprocating power pumps are designed with exceptional versatility to efficiently..... The ClydeUnion Pumps direct ...
CELEROS
Flow: 0.03 l/min - 1 l/min
Pressure: 0 bar - 2.5 bar
Input diameter: 0.3 mm - 6.4 mm
LabDos® peristaltic pumps are displacement pumps on which rollers force the medium which is to be fed through a hose from the outside. The fed material thus does not come into contact with metal parts ...
KD Scientific's Infusion Syringe pumps are suitable for transporting accurate amounts of liquid for numerous syringe pump operations. These applications include the infusion of calibrant into a mass spectrometer ...
KDS
Flow: 1.5 l/h - 60 l/h
Pressure: 2 bar - 16 bar
Power: 32 W
DOSmart AC is a series of dosing pumps with a step motor and advanced control functions to automate precisely and efficiently the dosing of chemicals in liquid state. This series of pumps ...
Flow: 0.00012 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 0 °C - 60 °C
- Peristaltic pump for wall or front-panel mounting - Reliable condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - With return stop - Rotational speed: 1 rpm - Material ...
Flow: 0.3 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 5 °C - 50 °C
- Explosion-proof version according to ATEX for zone 1 - Peristaltic pump for wall or front-panel mounting - Safe condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - ...
Flow: 0 m³/h - 850 m³/h
Head: 0 m - 950 m
Fluid temperature: 0 °C - 180 °C
Finally, there’s a robust and reliable pumping system for virtually any high pressure application. The Lowara e-MP multistage ring section pump combines Xylem’s century of experience, knowhow and expertise ...
LOWARA
Flow: 0.018 l/min
Power: 70 W
Our peristaltic pumps are used in all fields of analytical and preparative chemistry and in production operations. In particular, they are used in instrumental analysis, biotechnology, bioanalysis, ...
Spetec GmbH
Mohno screw pump Key Features Working Principles: Mohno Pump is a container type pump with a single shaft , turning eccentrically; it is composed of a rotor and a stator. The rotor ...
HIGH VISCOSITY MATERIAL FEEDING PUMP THIN MEDIUM FEEDING PUMP SANITARY FEEDING PUMP HEAT PRESERVATION SLEEVE DESIGN WATER CLEANING MECHANICAL SEAL AVAILABLE ALMOST HAVE ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 30 m³/h
... CIP self-priming pump adopts acid-resisting stainless steel (AISI 316) in its valve body. This has a unique resistance to alkali and acid. The positive displacement pump has features which are superior ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
... Enterprise introduces a rectangular inlet-outlet lobe pump which can transfer 1,000,000cps of high viscosity liquid which is designed to let the high viscosity liquid be sucked unto the lobe pump easily. ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 34 l/h - 336 l/h
Pressure: 238 bar
Weight: 15 kg - 38.2 kg
The Williams “W” Series Plunger Pumps offer a packed plunger design The Williams “W’ Series is a piston plunger pump with a mechanical seal. It is capable of precisely injecting chemical ...
Flow: 35 l/h
Pressure: 903 bar
The “V” Series pump is a range of compact, self-contained, pneumatic metering pumps suitable for injecting a wide variety of chemicals that range from 0.07 gph to 9 gph (0.27 lph to 34 ...
Flow: 111.66965, 2, 5 l/h
Pressure: 3,000, 2,500, 1,600 psi
Weight: 12.2, 55.1, 62.1 kg
WILROY Series Hydraulic Diaphragm Pump The WILROY metering pump is a unique blend of Williams and Milton Roy pump technology The WILROY is a pneumatic-hydraulically actuated diaphragm ...
Hypro centrifugal pumps handle big, high-capacity spraying jobs with ease. Use them for spraying liquid fertilizers and other chemicals, including wettable powder slurries for weed control. Make short ...
Hypro Pressure Cleaning
... Self-Priming Centrifugal Pumps, 140 GPM max Pentair Hypro self-priming centrifugal pumps handle big, high-capacity spraying jobs with ease. They offer outstanding performance without the need for a flooded ...
Hypro Pressure Cleaning
This high-powered, self-priming transfer pump achieves up to 200 gpm (757 lpm) and 58 psi (4.0 bar). The series includes 1542P-55SP, 1542P-65SP, 1542P-65ESP, 9342P-HM1C-5SP, and 9342P-HM5C-5SP. Key Features Close-coupled, ...
Hypro Pressure Cleaning
... can be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic. Accuracy within ± 1% within 10-100% of ...
Doseuro S.r.l.
Flow: 44 l/h - 3,569 l/h
Pressure: 40 bar - 250 bar
... be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic. Accuracy within ± 1% within 10-100% of rated ...
Doseuro S.r.l.
Flow: 44 l/h - 3,569 l/h
Pressure: 50 bar - 250 bar
Positive Return Sandwich Hydraulic Diaphragm Pump SDI Sandwich Hydraulic diaphragm dosing pumps comply with mechanical and performance API 675 standards. Furthermore they comply with ATEX standard, ...
Doseuro S.r.l.
Flow: 0 l/min - 246 l/min
Pressure: 20 bar
Head: 50 m
... Industry-Chemical process, deionized water, wastewater treatment, refrigerants and caustics O.E.M.-Washers, filters, chillers, cooling towers, scrubbers, plating equipment Agriculture-Acid fertilizers and other ...
Price Pump
Product feeling pump with pneumatic or electric functioning. The pump lets to transfer the product by the undervacuum homogenizer to the hopper of the filling machine. It can stop itself thanks to an ...
Flow: 1.3, 3.1, 7 m³/h
Pressure: 7 bar
Almatec C-Series The Cost-Effective Plastic AODD Pumps The Almatec® C-Series Air-Operated Double-Diaphragm (AODD) Pump is a cost-effective, reliable and superior-built alternative and features a solid ...
ALMATEC Maschinenbau GmbH
Flow: 0.9 m³/h - 36 m³/h
Pressure: 7 bar
Almatec E-Series State-Of-The-Art Plastic AODD Pumps The development of the E-Series was based on the extensive experiences with the proven pump models. The solid design with distinctive wall thicknesses, ...
ALMATEC Maschinenbau GmbH
Flow: 10 m³/h - 100 m³/h
... manufacturing a variety of specialty pumps for supplying and circulating chemicals in the semiconductor industry. With its straight-through flow pattern technology, the Almatec FUTUR Series Air-Operated ...
ALMATEC Maschinenbau GmbH
Flow: 110 l/min - 510 l/min
Head: 8 m - 37 m
Power: 0.26 kW - 2.2 kW
... maintained. (Except MX-F100) Volute casing divided into two sections The MX-F series is the first resin magnet pump which uses the pump casing divided into the front casing and the rear casing ...
IWAKI
Flow: 2,800 m³/h
Fluid temperature: 180 °C
... thermal shock. The CUP-BB5V range has been designed to produce an advanced pump with reduced whole life costs. All the pump internals can be withdrawn quickly without disturbing pump ...
Celeros
Flow: 15,000 m³/h
Fluid temperature: 180 °C
The ClydeUnion Pumps CUP-BB1 range are heavy duty, axially split single stage design engineered to maximize efficiency, provide high reliability, and offer the widest performance flexibility over the pumps ...
Celeros
Flow: 0 m³/h - 85 m³/h
Pressure: 0 bar - 370 bar
The ClydeUnion Pumps reciprocating power pumps are designed with exceptional versatility to efficiently meet the requirements of a wide variety of pumping applications. These units are ruggedly designed ...
Celeros
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining