Flow: 500 l/h
Fluid temperature: 65 °C
Length: 195 mm
The Si-1801/T (includes tubing) centrifugal tank pump is capable of evacuating 132 gph with a 23' shut off head.
Sauermann
Flow: 13 l/min
Pressure: 6.9 bar
Head: 67 m
... completely oil-less design. This design means: no oil misting into the environment, no unhealthy working conditions, no oil, lubricants or grease to contaminate your products. Our oil-less design results in lower operating ...
Price Pump
Flow: 12 l/min
Pressure: 1.3 bar - 8 bar
Dual effect heavy duty pneumatic piston pump for centralised systems, even for the most complex ones, for high viscosity oil. The possibility to adjust pressure from 0.3 bar to 8.5 bar guarantees great flexibility. ...
FILCAR
Pressure: 700 bar
Foot-pump with integral three-way directional control valve for supplying single-acting cylinders. A compact, portable, low-cost device equipped with 0.4 litre tank and having maximum operating pressure of 700 bar. Pedal-operated, ...
OLMEC
Flow: 9.5 us gal/h - 114.3 us gal/h
Pressure: 45 bar - 225 bar
The LK Series metering pump is the largest in the high performance line of pumps from Walchem. The LK is a motor-driven, mechanically actuated diaphragm metering pump with a maximum capacity ...
Flow: 2,500 m³/h
Fluid temperature: 80 °C
The ClydeUnion Pumps Duoglide range consists of both configured and engineered-to-order, axially split case, two stage pumps designed for higher head/flow applications. The Duoglide provides higher efficiency ...
Celeros
Flow: 2,800 m³/h
Fluid temperature: 180 °C
... thermal shock. The CUP-BB5V range has been designed to produce an advanced pump with reduced whole life costs. All the pump internals can be withdrawn quickly without disturbing pump ...
Celeros
Flow: 1,500 m³/h
Fluid temperature: 427 °C
The ClydeUnion Pumps CUP-BB2 is a heavy duty, horizontal, single or two stage, radially split, between bearings, double suction pump, top-top or side-side suction and discharge connections. The CUP-BB2 ...
Celeros
Flow: 300 m³/h
Pressure: 0 bar - 16 bar
Head: 95 m
Pumps of the series ULN are horizontal, self-priming, single-stage volume casing pumps with dimensions and nominal outputs according to EN 733 / DIN 24255 in back pull out construction. The back pull ...
Flowserve SIHI Pumps
Flow: 600 m³/h
Pressure: 16 bar
Head: 95 m
... removing the pump casing from the pipe work. If a spacer coupling is installed it is also unnecessary to disconnect the motor. Applications: The volute pumps of the series ZHN are part of the overall ...
Flowserve SIHI Pumps
Flow: 600 m³/h
Pressure: 40 bar
Head: 90 m
... removing the pump casing from the pipe work. If a spacer coupling is installed it is also unnecessary to disconnect the motor. Applications: The volute pumps of the series ZEN are part of the overall ...
Flowserve SIHI Pumps
Pressure: 40 bar
Fluid temperature: -20 °C - 180 °C
Screw pumps for industrial use series SSP (low pressure) and HSSP (high pressure) Service For all pumps Universal Hydraulik guarantee maintenance and repair.
Flow: 720 m³/h
Pressure: 16 bar
Head: 110 m
Slurry pumps have been designed for pumping liquid containing solid particles. Slurry pumps changes in design and construction to adjust to multiple type of slurry which varies in concentration of solids, ...
C.R.I. Pumps
Flow: 15,600 m³/h
Pressure: 16 bar
Head: 110 m
End suction pumps can be supplied in vertical execution as sump pump to handle different type of liquid for various applications in industries. These pumps are offered with enclosed or ...
C.R.I. Pumps
Flow: 0.96 m³/h
Head: 0.96 m
Power: 0.18 kW - 0.37 kW
C.R.I. 2″ G – Flow Series deep well / bore hole submersible pumps are designed to offer as a compact kit with pump, motor and control box in one pack. These pumps are ...
C.R.I. Pumps
Flow: 85 l/min
Head: 19 m
Power: 500 W
... •Suitable for dispensing diesel, heating oil, hydraulic oil, machine oil, engine oil, etc •Pump interior in aluminium •Ready-to-use kit, including a pump, media resistant hose (2 M), nozzle and drum ...
Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C
... Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements and lubrication demands. The SureFire II Lubricator is a self-contained ...
Delimon
Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C
VISCOSITY RANGE - 20-1500 CST PHASE - 1 PHASE HZ - 50/60 MOTOR ELECTRICAL CONNECTOR - CABLE GLAND INTEGRATED CONTROLS - TERM STRIP + MOMENTARY SWITCH LEVEL MONITORING - LLS PRESSURE GAUGE - INCLUDED RESERVOIR - 3L OUTLET THREAD ...
Delimon
Pressure: 9 bar
Fluid temperature: 5 °C - 40 °C
VISCOSITY RANGE - 20-1500 CST MOTOR ELECTRICAL CONNECTOR - CABLE GLAND INTEGRATED CONTROLS - TERM STRIP PRESSURE GAUGE - INCLUDED OUTLET THREAD - 1/4BSPP RETURN LINE THREAD - 1/4BSPP IP RATING - IP54 OPERATING TEMPERATURE RANGE ...
Delimon
... kinetic energy that comes out from impeller into pressure to force oil circulation. The pump can be a part of the pipe line due to the inlet and outlet of the pump are in the same axis. Therefore, the ...
ERG Technology
Flow: 0 l/h - 2,700 l/h
Pressure: 0.3 MPa - 1.5 MPa
Power: 0.25 kW - 1.5 kW
... The result is the employed compact and rigid mechanism. An outdoor installation is due to the fully enclosed oil bath lubrication possible. Various Typs and material Fitting for nearly any application ...
Flow: 0 l/h - 6,000 l/h
Pressure: 0.2 MPa
Power: 4.8 W - 200 W
The suction side of these diaphragm air pumps can be used as a vacuum pump and discharge side can be used as compressor. By the compact and light construction the APN ...
The Macnaught 20L ATF Hand Pump is your reliable fluid transfer companion. This pump is equipped with an anti-drip aluminium nozzle, ensuring precision and cleanliness with every stroke. No more messy ...
Macnaught Pty Ltd
The Macnaught 60L ATF Hand Pump is your reliable fluid transfer companion. This pump is equipped with an anti-drip aluminium nozzle, ensuring precision and cleanliness with every stroke. No more messy ...
Macnaught Pty Ltd
Flow: 10 l/min
... within pump body Motor is protected by IP55 rating Supplied with connection cables and alligator clips Pump is suitable to use with Diesel, Kerosene and light oil with viscosity less than 500CST Package ...
Macnaught Pty Ltd
Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 1,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 10 l/h - 2,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg
The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...
Flow: 0 m³/s - 40 m³/s
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C
Vertical immersion pumps are multistage centrifugal pumps for installation on the mounting flange of tanks. PUMPED LIQUIDS Light, non-explosive, clean or contaminated liquids. Water Cutting fluid Lubricants
Flow: 0 l/min - 650 l/min
Pressure: 0 bar - 100 bar
Fluid temperature: 0 °C - 60 °C
High pressure pumps High pressure spindle pumps. Solution for deep boreholes and the high pressure clearance of chippings. PUMPED LIQUIDS Light, non-explosive, clean liquids with at least 5% of ...
Flow: 0.5 m³/h - 3.5 m³/h
Pressure: 0 bar - 10 bar
Head: 9 m - 54 m
Horizontal low pressure multistage pumps can be used in numerous installations where the pump features and materials require specific conditions, such as: Air-conditioning Cooling Water treatment Fertilisation Environment ...
Flow: 0.7 m³/h - 9,370 m³/h
Pressure: 20 bar - 450 bar
Fluid temperature: -40 °C - 120 °C
... accuracy and reliability. The features include: Hydraulic oil-operated diaphragms Double oil for hydraulics and mechanism lubrication ensuring 100% chemical tightness and operational safety for higher reliability, ...
Flow: 3.4 l/h - 660 l/h
Pressure: 124 bar
Power: 1.1, 1.5, 0.18, 0.25, 0.75 kW
... result is a pump that delivers metering precision and consistency for repeatable results and efficient chemical consumption. Reliability Nyva’s ATEX-approved design and zero-leakage profile provide operators with ...
Flow: 0.21 m³/h - 67.69 m³/h
Pressure: 39 bar - 1,146 bar
Power: 2.2 kW - 110 kW
3C Triplex Pumps Series Process pumps for high-pressure duties A flexible, robust and reliable solution to pumping high temperature, abrasive and viscous liquids in a multitude of industrial applications, ...
Flow: 11 m³/h - 11,500 m³/h
Head: 120 m
... space requirements Multistage canned vertical turbine pumps offer the same versatility and performance as our lineshaft pumps and are ideal for closed-loop boosting. These are short-set lineshaft pumps ...
Flow: 57 l/min
Pressure: 10 bar
... applications of low viscosity fluids, diesel, non aggressive fluids, short distances without reels. Needle valve for regulating pump speed is included. Designed for quiet and reliable operation and for 200l drums, spout ...
Flow: 0 us gal/min - 160 us gal/min
Length: 450 mm
Width: 333.5 mm
... double-diaphragm (AODD) pump is engineered to safely seal when pumping aggressive chemicals. The 2" AODD pump offers an ideal combination of flow, size and portability, with a maximum flow rate of 163 ...
Flow: 0 us gal/min - 234 us gal/min
Length: 208 mm
Width: 381.22 mm
... ATEX-certified AODD pump is suited for use in potentially hazardous environments, including those containing chemicals, oil and gas. Versamatic delivers the safety of ATEX compliance in the pump styles ...
Flow: 0 us gal/min - 234 us gal/min
Length: 508 mm
Width: 381.22 mm
... ATEX-certified AODD pump is suited for use in potentially hazardous environments, including those containing chemicals, oil and gas. Versamatic delivers the safety of ATEX compliance in the pump styles ...
Flow: 0.4, 0.2, 0.1 l/min
Pressure: 200, 320, 400 bar
Power: 1.1 kW
The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...
Zaklady Automatyki POLNA S.A.
Flow: 0.03, 0.06 l/min
Pressure: 200 bar
Power: 0.38 kW
The pump is designed to periodically feed lubricant or oil to friction nodes in machines by means of two-way dosing units (dosing distributors). It is recommended for heavy duty machines and plants ...
Zaklady Automatyki POLNA S.A.
Pressure: 100 bar
Fluid temperature: -10 °C - 60 °C
Width: 158 mm
... with similar equipment and work conditions. The pump consists of the following units: lubricant tank, pump body with pumping system elements, distribution slider ...
Zaklady Automatyki POLNA S.A.
Flow: 10 m³/h - 1,400 m³/h
Weight: 142 kg - 1,956 kg
The Linatex pump, type III R, belongs to the latest generation of successful wear-resistant and corrosion resistant slurry pumps and has an improved efficiency. It has in practice proven durable Linatex ...
Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C
... are located on the same horizontal line, vertical installation, small footprint, easy installation. The pump has a separate bearing frame and the bearings are grease lubricated. The pump ...
Flow: 3 m³/h - 1,000 m³/h
Pressure: 27.5 MPa
Head: 2,450 m
... centerline installation, support at both ends. The balance drum structure balances the axial force, the cylindrical barrel and the pump cover are tightly in the mouth section, and the seal is fixed. When working, under ...
Flow: 25 m³/h - 2,700 m³/h
Pressure: 31 MPa
Head: 2,600 m
... conditions. ◉ Application: Crude oil, petroleum products, water, seawater and other liquids that are pure or contain a small amount of impurities; Crude oil, refinery, petrochemical, water injection, pipeline, boiler ...
Please specify:
Help us improve:
remaining