ARI-Armaturen safety valves

Controlled pressure: 13, 11, 10, 16 bar
DN: 25 mm - 100 mm
Weight: 9.8 kg - 48 kg

SF20 Series DIN Flange Steel Pressure Relief Valves are mainly applied to such trades as petroleum & natural gas, chemistry, electric, metallury & burning gas. As the super-pressure protecting equipment. With high precision ...

Controlled pressure: 0.1 bar - 45 bar
DN: 0.38 in - 2 in

V651 Series safety relief valves are produced as safety and relief type. Safety valves are pressure relief elements used to evacuate excessive pressure ...

Controlled pressure: 8 bar - 50 bar
DN: 12 mm - 19.5 mm

Series 3030 and 3060 valves are safety accessories according to the definition contained in Directive 97/23/CE and are subject to the requirements of the Directive. These valves are conventional ...

DN: 0.25 in
Flow rate: 50 l/h - 85 l/h

The KBB is a fire safety shut-off valve for use on oil-burning equipment... The valve is installed in the oil supply pipeline outside the building with the sensor mounted firmly inside ...

Controlled pressure: 2.8 bar - 36 bar
DN: 6 mm
Flow rate: 15 l/s - 141.62 l/s

... contact Seetru for help in sizing to your specifications. Product Description: 6mm Nominal Bore Atmospheric Discharge Safety Relief Valve for Compressed Air & Gases

... DGR 97/23/CG, ASME, GOST u.a.). A variant for steam, gas and liquid of each valve has been type-tested by TÜV in accordance with German regulations. The Safety Relief Valves series ...

Controlled pressure: 10, 16, 25 bar
DN: 40 mm - 200 mm

DJET safety relief valve TALIS offers the most effective solution for the protection of your networks against water hammer consequences. DJET safety relief valve ...

Controlled pressure: 0 bar - 25 bar
DN: 0.5 in - 1.25 in

DESIGN SV2100xx + SV2200xx are safety valves, spring-loaded, angle type, set pressure secured by lead seal cap. According to AD- sheet A2. OPERATION Opens automatically, when the pressure exceeds the ...

There are two types of internal valves being used on storage tanks, transports and bobtails - spring loaded internal valves and differential pressure internal valves. They both provide ...

Controlled pressure: 2 bar - 485 bar
DN: 80, 59, 36 mm
Flow rate: 5.7 m³/h - 461.3 m³/h

Maximum operating pressure (bar) : 500 Gas compatibility : See commercial sheet

Weight: 115, 120, 130, 215 kg

A Conventional Safety Relief Valve (PRV) uses a spring to keep the valve closed until the process nears the set pressure. The spring force pushes the valve’s disc against ...

Controlled pressure: 5 bar - 55 bar
DN: 0.5, 0.13, 0.38 in
Flow rate: 11.3 m³/h - 111.6 m³/h

Cryogenic Safety Valves Type 06011 is made with stainless steel. It is provided as a safety device for protection against thermal expansion in pipework and parts of facilities. ...

Controlled pressure: 75 psi - 250 psi
Flow rate: 10, 42 ft³/min

Model "SP" ASME safety valves are designed for applications where a compact size is required and high flow capacities are not needed. For example, a 3 HP compressor may add 10 SCFM of air into the receiver ...

Controlled pressure: 0.5 bar - 7.4 bar
DN: 2.5 in
Weight: 3 kg

2½” MEGA SUPERVENTIX™ threaded safety relief valve is designed to protect tanks against accidental overpressure and excessive vacuum. With a smart compact design, the 2½” BSP MEGA SUPERVENTIX™ SRV has ...

Controlled pressure: 1 bar - 45 bar
DN: 7 mm - 20.5 mm

Free Exhaust Valves - SA series The safety valves produced are of the direct loading type and are used to protect the components on which they are to protect the elements on which ...

Controlled pressure: 16, 10 bar
DN: 0.38 in - 2 in

- Using conditions : steam, compressed air, gas. Can be installed in any position. - Brass bodies - Interchangeable zinc plated spring. - Open exhaust - Metal/metal tightness (brass seat). - ISO 228-1 male gas thread - Setting range ...

DN: 9.53, 12.7 mm
Flow rate: 80, 50 l/min
Weight: 0.04, 0.66, 0.08 kg

VUBA-DIN SAFETY VALVE FOR HOSES DIN HOUSING HOSE BURST VALVE WIT AUTOMATIC LOAD LOCK FOR DIN HOSES Conceived with the aim of avoid additional externa housings, the hose burst valves ...

Controlled pressure: 0 bar - 10 bar
DN: 0.5 in

Membrane safety valves and brass safety valves for heating systems

Controlled pressure: 1.6 MPa
DN: 89 mm - 483 mm
Pressure: 0.1 MPa - 1.6 MPa

Full Lift Pressure Safety Valve Parts name - Materials Valve body - WCB Seat ring,Adjusting ring,Valve guide,Adjusting screw,Stem - 2Cr13,Stainless steel Bonnet,Protective ...

DN: 0.5 in - 2 in
Flow rate: 21 m³/h

... connection diameter DN 15-50) are system separators according to construction design BA of DIN EN 12729. The system separator,is a safety device to be installed in water pipes if special with drawal points or appliances ...

DN: 0.25 in - 1.5 in

HEROSE cryogenic angle safety valve with lifting device. Degreased for oxygen. Cryo - Degreased

Controlled pressure: 10.3 bar - 31 bar

... XX.X denotes setting in Bar to 1 decimal place Category 4 PED compliant High flow capacity Non-stick teflon valve seat Tamper proof with sealing wire Test certs available on request

Controlled pressure: 115 psi - 200 psi
DN: 0.25 in - 0.5 in

AEA Safety valve is a valve that act as a protection of equipment from exploding or damaging and it is mainly installed in pressure vessels such as chemical plants, electric ...

Controlled pressure: 25 psi - 350 psi
DN: 0.38, 0.25, 0.13 in

-Rated for ASME, NB, UV and CRN standards. -Available with brass body and stainless steel spring. -Unfired pressure vessel -Pressure settings ranging from 80-225 psi (1/8" & 1/4" NPT) and 25-350 psi (3/8" NPT) U200C-1M 1/8" MNPT ...