- Hydraulics - Pneumatics >
- Pump >
- Industrial pump >
- ARO
ARO industrial pumps
Pressure: 8, 96 bar
... contrast to screw pumps, WIWA THICK FILM PUMPS can be rinsed and cleaned with thinner without any problems. Thus, they are also ideally suited for processing epoxy-based materials. Thanks to the use of ...
WIWA
Flow: 25 l/min
Pressure: 8 bar
Weight: 10 kg
... material hose. Positive features include the low air consumption, the pressure limitation and the compact size, with which you will not feel crowded even on small construction sites. Fields Of Application Cavity ...
WIWA
Pressure: 8 bar - 240 bar
Weight: 23 kg
... materials Easy operation and maintenance of the unit Fast start-up of the pump with very low air input Easy handling. The WIWA INJECT HD 4 and HD 5 are pneumatic 1K piston pumps characterized by ...
WIWA
Pressure: 4 bar - 8 bar
Piston metering pneumatic pump with 1.2L and 4L transparent oil tank Piston metering pneumatic pump, air pressure 4-8bar, 0-0.04ml/stroke;
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
Flow: 0.025, 0.05, 0.06, 0.12 l/min
Pressure: 380 bar
Fluid temperature: -10 °C - 50 °C
... high-performance lubricating pump for medium and large machinery. The dual pump core module laser low level is the standard Fuel tank capacity: 10kg, 30kg, 100kg Flow: 25ml, 50ml, 60ml. 10℃~ +50℃ DX1 ...
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
Flow: 0.2, 0.4 l/min
Pressure: 40 MPa
Power: 0.75 kW
... been committed to the design and development of new technologies and new products. SOATOER Double Line Electric Lubrication Pump Fuel tank volume 30-60-100KG Applicable grease≤NLGI2 With high and low liquid ...
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
Flow: 10 m³/h
Pressure: 4 bar
LOW PRESSURE HOSE PUMPS Reduce maintenance downtime... Suitable for pumping and dosing low or high viscous, pasty, pure, neutral, aggressive or abrasive liquids, those containing gases or which tend ...
Tapflo
Flow: 150 m³/h
Pressure: 15 bar
HIGH PRESSURE HOSE PUMPS The latest design PT pumps combine the best available materials with smart design solutions in order to maximise running time and minimise maintenance. The PT series pump ...
Tapflo
Flow: 0 m³/h - 76 m³/h
Power: 0.25 kW - 6 kW
CTI INDUSTRIAL PUMPS The CT pumps are open or semi open impeller single stage centrifugal pumps. They are manufactured in high finish and mechanically ...
Tapflo
Pressure: 0.4 bar - 2.5 bar
Full PTFE bellows pump Pump head can be rotated in 90° steps and connected to the gas line from the top or side Max. capacity: approx. 5 Nl/min with a counter-pressure of ±50 mbar on ...
M&C TechGroup Germany GmbH
Pressure: 0.25 bar - 2.5 bar
Fluid temperature: 5 °C - 180 °C
... capacities, power: 115 V/60 Hz or 230 V/50 Hz The compact diaphragm pumps type N3/5/9 are suitable for sampling air, gases and vapours in a temperature range between + 5 °C and + 40 ...
M&C TechGroup Germany GmbH
Flow: 0.00012 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 0 °C - 60 °C
- Peristaltic pump for wall or front-panel mounting - Reliable condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - With return stop - Rotational speed: 1 rpm - Material ...
M&C TechGroup Germany GmbH
Flow: 90 m³/h - 3,780 m³/h
Head: 15 m - 130 m
Power: 11 kW - 800 kW
... protection to ensure long and safe pump operation under abominable working conditions. 5) Especially for multifunctional small and medium scale dredging projects. 6) High-chromium alloy material, aluminum ...
Relong Tech
Flow: 200 m³/h
Head: 30 m
... dredge pumps are mainly used as an excavator attachment taking place of a grab bucket when there is too much water, and mud and are not suitable for digging. It is driven by the excavator hydraulic system or a separate ...
Relong Tech
Flow: 400 m³/h
Head: 40 m
The RELONG hydraulic submersible pump with agitator is a highly efficient and modular heavy-duty submersible dredge pump unit. The hydraulic dredge pump is mainly used as an excavator ...
Relong Tech
Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m
... controlled by CM control module. - Multistage pump made of AISI 304 stainless steel. An inverter allows 4HS to: - Change pump speed to maintain set-pressure regardless of water demand. Consequently ...
Flow: 31 m³/h
Pressure: 8 bar
Head: 62 m
Wide range of pumps for domestic and industrial applications.
LOWARA
Flow: 0.6 m³/h - 158.9 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: -10 °C - 140 °C
... designed lobes. The pump is authorized to carry 3-A symbol. Note: Consult the options of the pumps authorized to carry 3-A symbol. The SLR pump is a bare shaft rotary lobe pump. ...
INOXPA
Flow: 1.4, 4, 9, 20, 28 m³/h
Pressure: 2 bar - 4 bar
Power: 0.75, 1.5, 3 kW
The RF pump is a flexible impeller pump. Due to the design, these pumps are reversible, self-priming and can suck from a maximum height of 5 meters. This type of pump ...
INOXPA
Flow: 1,000 m³/h
Pressure: 10 bar
Head: 295'00"
The DIN-FOOD pump is a hygienic high capacity centrifugal pump (up to 1000 m³/h) designed to cater for an unfulfilled need in the food-processing and chemical and pharmaceutical industries. The applications ...
INOXPA
KGL series servo screw platen pump realizes precise glue supply and metering of the system based on the technical principle of eccentric screw valve, and is suitable for various single and two-component glues from high ...
... saving and noise reduction Compared with the traditional pneumatic platen pump, the servo screw platen pump can save energy by more than 300%. The servo screw platen pump runs more ...
Flow: 104 m³/h
Head: 36 m
Power: 7,500 W
• PP materials, PVDF • Connections DIN EN ISO 9906 Dry-run safe close coupled sump pump Highest operational safety because of bearing-less design partly suitable for particle loaded fluids Tailor-made mounting plates ...
DIVATEC,SL
Flow: 80 m³/h
Head: 27 m
Power: 180 W - 7,500 W
... seals • Materials PP-GF, PVDF • Height up to 65m • Engine coated corrosive EPOXI paint Type of construction • Horizontal pump with hermetic seal and magnetic coupling, with special bearing pair, suitable for dry ...
DIVATEC,SL
Flow: 1,000 m³/h
Pressure: 16 bar
• PP, PVDF, PTFE materials • For large pumps • PN16 • ISO 2858 / DIN EN 22858 connections • For fluids with solids X-CLASS is the beginning of a new generation of powerful heavy-duty plastic pumps. Based ...
DIVATEC,SL
ALLDOO Micropump | Micro Diaphragm Pumps
... ,12VDC and 24VDC micro diaphragm vacuum pumps,gas pumps,water pumps,self priming liquid pumps and long lasting DC brushless motor micropumps,provides ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 5 l/min
Pressure: -700 mbar - 2,000 mbar
Length: 30 mm
CMP30 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical Features: 1.Uncontaminated ...
ALLDOO Micropump | Micro Diaphragm Pumps
air MAGNETIC DIAPHRAGM pump Spec Type:Aeration Pipe,Areator,Other air pump:air MAGNETIC DIAPHRAGM pump Key Features * Low Noise * High Durability * No Lubrication Necessary * ...
Mohno screw pump Key Features Working Principles: Mohno Pump is a container type pump with a single shaft , turning eccentrically; it is composed of a rotor and a stator. The rotor ...
CEMO
Hand pump 25 l/stroke Order-number: 1452 Details Hand pump, accessories for UNI- and MULTI-Tank, pumps and accessories specially adapted for DWT diesel filling stations -robust ...
CEMO
Steel drum-pump Order-number: 7892 Details Hand pumps for diesel and lubricants -robust construction -no energy source required -low-cost -2” connector -suction tube can be ...
CEMO
Power: 1,400 W
Length: 195 mm
Width: 195 mm
Magnetic pump • Total dimensions L x W x H: 195 x 195 x 355 mm • Power: 1400 W • Alloy capacity: 8 Kg • Maximum PCB dimensions: 160 x 500 mm • Maximum temperature: 300 ° C • Heating time: 1h Pot of ...
HIGH VISCOSITY MATERIAL FEEDING PUMP THIN MEDIUM FEEDING PUMP SANITARY FEEDING PUMP HEAT PRESERVATION SLEEVE DESIGN WATER CLEANING MECHANICAL SEAL AVAILABLE ALMOST HAVE ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Lobe pump is widely used to transfer high viscosity liquid and semi-solid liquid. Lobe pump can transfer sauce, cream,food, cosmetic, pharmaceutical liquid,mayonnaise,syrup,meat paste and so on. Rotor ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Stainless steel pneumatic diaphragm pump Brief introduction The stainless steel pneumatic diaphragm pump uses compressed air as the power source, which can be used in various complex working conditions ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 35 l/h
Pressure: 903 bar
The “V” Series pump is a range of compact, self-contained, pneumatic metering pumps suitable for injecting a wide variety of chemicals that range from 0.07 gph to 9 gph (0.27 lph to 34 lph) and pressures ...
Williams Milton Roy
Flow: 111.66965, 2, 5 l/h
Pressure: 3,000, 2,500, 1,600 psi
Weight: 12.2, 55.1, 62.1 kg
WILROY Series Hydraulic Diaphragm Pump The WILROY metering pump is a unique blend of Williams and Milton Roy pump technology The WILROY is a pneumatic-hydraulically actuated diaphragm ...
Williams Milton Roy
Flow: 2.8 l/h - 170.3 l/h
Pressure: 5.17 bar - 6.54 bar
Weight: 2.7 kg - 5.2 kg
Low Pressure Diaphragm Pumps The CLD Pneumatic diaphragm metering pump consists of a liquid chamber and an air chamber separated by a diaphragm The CLD is a pneumatic driven low-pressure diaphragm ...
Williams Milton Roy
Head: 60 mm - 260 mm
Power: 250, 120, 60, 180 W
... ) : 60 • Weight (Kg) : 2 • Packaging (mm) : 25X25X30 • Draught (mm) : 60 The continuos service self-priming electric pumps are suitable for continuos coolant flow and assure absolute operating safety even at high temperatures.
Flow: 0.8 l/min - 5 l/min
Fluid temperature: 0 °C - 45 °C
Length: 112 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Flow: 2 l/min
Length: 112 mm
Width: 37 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Flow: 1 l/min - 300,000 l/min
Length: 112 mm
Width: 37 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Pressure: 10 bar
Fluid temperature: 60 °C
Weight: 600, 720 g
A, AD Type Modern and compact oil burners pump, designed to pump fuel from the tank to the burner nozzle, at the required pressure. The A – AD type pump is made of a ...
Elettromeccanica Delta S.p.A.
Flow: 1,700 us gal/h - 8,000 us gal/h
Rule your dewatering! Backed by the Rule brand of DC pumps, a brand enjoying over 45 years of operational excellence, the Evacuator series is a new line of high efficiency portable utility pumps. Providing ...
RULE INDUSTRIES
Flow: 0 us gal/min - 178,000 us gal/min
Head: 0'00" ft - 152'00"
Axial Mixed Flow Pumps Vertical, wet pit design pump for Circulating Water Service (including condenser). Specifically designed for the nuclear industry, it features a number of hydraulic designs, and ...
Hayward Tyler®
Flow: 0 us gal/min - 3,000 us gal/min
Head: 0'00" ft - 500'00"
... Hayward Tyler End Suction Pumps are ideal for the following applications: Safeguard Pumps ASME Section III Class 2 Seal water injection pumps Decay heat pumps ...
Hayward Tyler®
Flow: 0 us gal/min - 50,000 us gal/min
Head: 60 m - 210 m
Design Features of Hayward Tyler Vertical Turbine Pumps The VS range was designed specifically for the nuclear industry and offers three different impeller types. Each impeller type provides a different head-capacity ...
Hayward Tyler®
Flow: 10 m³/h - 20,000 m³/h
Head: 3 m - 300 m
PRODUCT FEATURES Expect more with the improved design and above standard, standard materials options of the e-XC split-case pump: Xylem's proprietary mechanical seals - carbon/silicon carbide seal with an EPDM elastomer ...
Jabsco
Pressure: 275 bar
Ideally suitable for the automatic grease lubrication of all types of industrial machines and as a chassis lubrication pump for trucks, trailers, buses, construction and mechanical handling vehicles. ...
I.L.C. srl
Flow: 42 l/min - 129 l/min
Pressure: 500, 400, 320 bar
Power: 0 kW - 75 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 201, 167, 266, 221, 278 l/min
Pressure: 160, 210 bar
Power: 0 kW - 75 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 103 l/min - 163 l/min
Pressure: 365, 575, 465 bar
Power: 0 kW - 110 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 0.03 m³/h - 180 m³/h
Pressure: 24 bar
PCM Ecomoineau™ M is the most compact progressing cavity pump (PCP) available on the market today. Its revolutionary design combines the legendary performance and reliability of PCM PCP technology with ...
PCM
Flow: 1 m³/h - 100 m³/h
Pressure: 0 bar - 260 bar
PCM pumps are easy to order, delivered fast, simple to operate and incredibly reliable. PCM Oil & Gas transfer pumps combine the legendary performance and reliability of PCM progressing ...
PCM
Flow: 0 m³/h - 55 m³/h
Pressure: 0 bar - 24 bar
... progressing cavity pump is a culmination of our unrivalled industry expertise and our unwavering commitment to provide the best fluid handling solutions. PCM Moineau™A pumps meet all ...
PCM
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining