ARO transfer pumps

Flow: 40, 30, 19, 10, 7.1 m³/h
Pressure: 20 bar
Power: 30, 22, 18.5, 11 kW

Ceramic plunger pump is widely used in transfer every kinds of stone wastewater. Marble Granite Wastewater Mud TTansfer Plunger Pump |Mud TTansfer Pump Characteristh 1. ...

Flow: 9 m³/h - 11,356 m³/h
Head: 3 m - 609 m

... Handles raw water intake, liquid transfer, cooling water circulation, booster service, stormwater, flood control, marine, process services, volatile fluids, condensate, fuel pumps, and mine dewatering ...

Flow: 5.5 l/min - 135 l/min
Head: 1 m - 20.3 m
Power: 5 W - 260 W

Highly reliable, compact magnetic drive pumps. Field-proven reliability A large number of pumps in this series have been delivered to customers at home and abroad, earning high ...

Flow: 14 l/s
Head: 17 m
Power: 12 kW

MEC D SURFACE PUMPS Suitable for pumping water in mobile or semi-fixed irrigation systems. Centrifugal pump with horizontal axis, spiral delivery casing, and one or two impellers in series. Reliable ...

Flow: 0 m³/h - 900 m³/h
Pressure: 0 bar - 16 bar

Leistritz screw pumps of the L2NG/NT series are twin screw single volute, self-priming positive dis-placement pumps for low pressure duty, suitable for transport of slightly abrasive and corrosive, high ...

Flow: 1 m³/h - 200 m³/h
Pressure: 1 bar - 16 bar
Head: 5 m - 70 m

Plastic Lined Horizontal - Single Stage - Centrifugal pump with Mechanical Seal Lining: PP (Polypropylene) Long-coupled and Close-coupled executions Versatility: Suitable for handling corrosive, aggressive and hazardous ...

Flow: 1.1 l/min - 2 l/min
Pressure: 550, 700, 1,000 mbar

Eccentric Diaphragm Pumps EC Serie 500 These gas pumps, specially developed to transfer minimal volumes under 1,8 l/min, are known for their small size and low power consumption. Due ...

Flow: 10 l/min - 42 l/min
Pressure: 0 bar - 7 bar

The ACD pumps come in two executions; Lube Line and Fuel Line. The main difference is the shaft seal design; V-seal - optimized for light duty and T-seal - heavy duty respectively. The ACD pump is used ...

Flow: 0 m³/h - 120 m³/h
Head: 0 m - 300 m

... non-explosive, not containing solid particles or fibers Water supply & drainage for high-rise buildings, filtration and transfer at waterworks, pressure boosting in main pipe Washing and cleaning systems, boiler feeding, ...

Flow: 11 l/min - 17 l/min
Pressure: 2 bar - 8 bar
Head: 0 m - 80 m

CUBIC 15 diaphragm pumps are characterized by exceptional performance, power and strength, making them ideal for pumping liquids with high apparent viscosity even if containing suspended solids. Especially suitable in ...

Fluid temperature: -40 °C - 80 °C

... can be used as the oil transfer equipment for the airport, oil depot and gas station. Feature ZX series pumps are directly connected to the gearbox for speed increasing, and the pump ...

Flow: 2.3 m³/h - 17 m³/h
Pressure: 9, 8.5 bar
Fluid temperature: -50 °C - 260 °C

The 893 Series™ internal gear pump is the perfect solution for refined fuels, lube oils, rotating equipment lubrication, and more due to the sealless mag drive which provides the highest level of liquid and vapor containment. ...

Flow: 8 l/min - 1,985 l/min
Pressure: 8.6, 13.8 bar
Fluid temperature: -32 °C - 260 °C

... Sliding Vane Pumps, which are part of the Iron Line, are a general purpose positive displacement pump ideal for applications where high temperature, high pressure, high viscosity and/or shaft sealing ...

Flow: 7 l/min
Pressure: 6 bar
Head: 60 m

... double-diaphragm pump gives process managers a versatile solution to almost any chemical dosing or liquid transfer application. Free of electrical components, Duotek can be fully submerged without ...

Flow: 0 us gal/min - 15 us gal/min
Pressure: 0 psi - 150 psi

... UTILITY PUMPS Designed for use where low flow or transfer duties in both domestic and industrial applications are required, these self-priming pumps can achieve suction lifts up to 26 ...

Flow: 140 us gal/min
Head: 16.8 m

... Vane and Low Noise Motor. Hydrostatic Tested Pump Casing to 1.5 Times the Maximum Operating Pressure. Pump Supported by the In-Line Piping Allowing Quick Installation. Vacuum Case ...

Flow: 108 m³/h

The turbo-pump is used to transfer water from one location to another. By supplying pressurized water at the inlet, the turbine rotates and drives the wheel simultaneously. The water is sucked by the ...

Flow: 3 m³/h - 120 m³/h
Pressure: 8 bar

Cail & Fletcher SUMO and ROTA massecuite pumps are designed to transfer massecuite or magma products in a wide flow range (3 to 120m3/h), High quality Cail & Fletcher SUMO and ROTA massecuite pumps ...

Pressure: 50 bar - 700 bar
Weight: 12 kg

... rigid. • The foot pedal is operated in one movement and the system is activated and instead of manpower, it only serves to transfer oil to lifters. • Hydropneumati

Flow: 300 m³/h
Pressure: 6 bar
Power: 15 kW

... centrifugal pumps PMB / PMC Construction Single-stage, close-coupled horizontal centrifugal PMC pumps. Direct coupling to the motor by rigid sleeve. With a particularly robust and economical ...

... the fluid makes this pumps indispensable for transferring and storing milk, yogurt, cream, mustard, ketchup, mayo type of sensitive materials. For transferring concentrated materials as chocolate, marmalade, air transfer ...

Flow: 0 m³/h - 1,500 m³/h
Fluid temperature: 90, 100 °C

The pumps of the APM series are high pressure Multicellular Centrifugal Pumps. These pumps are used to transfer clean or slightly dirty fluids that do not contain ...

Item number: 051889 Application The Eckerle transfer assembly is a pump unit without any control device comprising a foot flange compact motor and internal gear pump. Description Supply ...

Flow: 110, 100 l/min
Pressure: 0 Pa - 700,000 Pa

Port size 3/4"(20mm) maximum fluid discharge of 110L/min This compact light weight pump has a very competitive fluid transfer rate and is popular in many industries. It has a very competitive ...

Flow: 1,250 m³/h
Pressure: 10 bar
Head: 65 m

Self-Priming Centrifugal Pumps, with semi-open impeller, suitable for dirty or waste water applications. Solid passage size limit to 75mm (3 inches). The internal construction allows air to separate from water to achieve ...