The EL400 Digital Read Out is a robust DRO. This DRO has special versions suitable for Milling and Lathe functionality. A standard DRO can be used for milling Lathe, grinding, boring machines. EL400 DRO is also ...
F325 is a digital indicator for strain gage type sensors (DIN 96x48mm size). With analogue/digital hold function and high-speed signal processing capability (3000 times/sec.), it enables ...
UNIPULSE Corporation
Technical Data 1. Measuring range: 0-50mm 2. Resolution: 0.01mm/0.0005inch 3. Accuracy: ±0.006mm 4. Display: LCD character 5. Data output: Yes 6. Battery: 3V CR 2032 environmental lithium battery 7. Working temperature: 0℃-40℃ 8. Relative ...
VW Indicator measure all types of Vibrating Wire transducers. Reading sensors - VW Strain Gauges - VW Piezometer - VW Load Cell - VW Rebar Stressmeter - VW Crack Gauge - VW Total Pressure Cell - VW NATM Stress Cell - ...
... values indication CAN 2.0 data interface The Digital indicator ZET 7178 is intended for indicating the data transmitted via the CAN network by the ZETSENSOR series digital sensors. The ...
... T6 Gb, IP66 Cable entries: 3/4″ NPT x 4 K1SCG0: Power LED light (R) and ground LED light (G) K1SCG1: Power LED light (R), ground LED light (G), and pushbutton K1SCG2: ...
... cables. – The B Version enhances safety by lighting the indicator by flashing when a voltage is dangerous. The flashing of the indicator accelerates to its reference voltage, then the indicator ...
P1000 Strain Gage Indicator is an economical instrument with high accuracy and multiple functions. It is a Strain Gage Indicator and also function as a Strain Gage Transducer Indicator. As ...
Advance Instrument Inc.
... with digital zero adjustment and analogue output for continuous recording of measurement values • Up to 12 sensor configurations can be stored • Automatic detection of full-bridges and 2x quarter-bridges (strain rings) Application: The ...
X-Sensors AG
... Digit LED Display 50 times/sec (Relay 3CH Output) For: -Industrial weighing applications -Force, pressure & torque measurements Features: -24 Bit Sigma-Delta A/D converter for high accuracy -3 Set point ...
Bongshin Loadcell Co.,Ltd
* Minimum depth indicator less than 0.5" (12.7 mm) of space required behind the panel * Fits 3/64 DIN standard cutout * 3 1/2 or 4 1/2 digit, 0.5" (12.7 mm) high LCD display with optional negative ...
TECHNICAL DATA Max. reading: 999Z-99 Led: 7 segments 14mm red, high efficiency Decimal points: programmable Fullscale adjustment: through frontal trimmer Over range ind.: EEE/--- Zeroing: by trimmer Accuracy: ±1 digit Linearity: ±1 ...
F.C. Misure
Features Adopts digital communication between wind sensor and wind data display, effectively improve product reliability and anti-interference capacity. 12 bit resolution current signal output. Two-way relay alarm ...
For more than 40 years, the Murata Power Solutions offering of digital panel meters has been recognized as the industry's most versatile and have been expertly designed for a variety of applications. ...
A process indicator with extensive features, including crystal-clear display, problem-solving capability and flexible connectivity The ControlMaster CMF160 is a feature-packed DIN universal process indicator ...
A feature-packed 1/8 DIN universal process indicator with a crystal-clear, full-color, TFT display The CM15 is a feature-packed 1/8 DIN universal process indicator. A crystal-clear, full-color, TFT display ...
The SITRANS RD100 is a 2-wire loop powered, NEMA 4X enclosed remote digital display for process instrumentation. The RD100 is very versatile. It can be installed indoors or outdoors, in hot or cold environments, and in ...
The SITRANS RD200 is a universal input, panel mount remote digital display for process instrumentation. The RD200 is a universal remote display for level, flow, pressure, temperature, weighing, and other process instruments. ...
... V DC transmitter power supply Serial communication using built in protocol or Modbus RTU Supports up to 8 relays and 8 digital I/O for process control and alarming 32-Point Linearization, square root or exponential ...
Position indicators GN 000.3 have been shaped for installation into different operating devices. The salient features of these counters are: The housing, the hand spindle, and safety glass are produced from one piece ...
Otto Ganter GmbH & Co. KG
Position indicators GN 955 are fitted with a direct drive counter with digital read out. Both housing sections are ultrasonically welded. This makes the housing particularly compact and stable. The ...
Otto Ganter GmbH & Co. KG
... interface between the position indicator and the machine control. A target position value is sent by the machine control to the control unit, which transmits this via radio frequency to the position indicator. ...
Otto Ganter GmbH & Co. KG
The digital position indicator type 2040 from Schubert & Salzer for pneumatic valves with linear or swivel actuator convinces with its compact design, clear coloured light signalling and reliable end ...
Digital process display for analog sensors, integrated sensor supply 6-digit LED display, free scaling Input: 0...10 V, 0/4...20 mA, potentiometer RS232, 4 switched outputs
Digital process display for incremental sensors, integrated sensor supply High counting frequency up to 250 kHz 6-digit LED display, incremental RS232, 4 switched outputs
The IHH500 Hand Held Portable Digital Display is FUTEK’s solution that can be easily integrated to work with Load Cells, Torque Sensors and Pressure Sensors. The IHH500 has an input range of up to +/-500 mV/V. Beside ...
FUTEK Advanced Sensor Technology, Inc.
Decrease operator observation and increase productivity with the machine status indicator lights for OptiMAX. Utilizing industry wide known-colored lights, operators can safely monitor the abrasive waterjet from a distance ...
• Easy recognition of judgement results using color display that can be switched between red and green. • Equipped with a position meter that represents measured amounts and relative positions. • Develop a variety of measurement ...
For more than 15 years, Bitronics products have been delivering best-in-class solutions in digital meters with local indicators and Supervisory Control and Data Acquisition (SCADA) communications. Alstom ...
Position indicator quasi-absolute, mains-independent, indicator accuracy 10 µm, small design Material: Housing plastic. Screen LCD display. Version: Position indicator with integrated ...
The DPM-400 loop-powered digital panel meter allows you to install a local display right where you need it. No power, no problem. This digital panel meter is powered ...
The DPM-500 is an easy-to-read dual-line display. It accepts 4-20 mA inputs from a variety of sensors and can be used to power the loop if needed. It is viewable in fog, dust, smoke, and direct sunlight with optional superbright-readable ...
Please specify:
Help us improve:
remaining