- Hydraulics - Pneumatics >
- Pump >
- Industrial pump >
- Baker Hughes
Baker Hughes industrial pumps
Pressure: 700 bar
Foot-pump with integral three-way directional control valve for supplying single-acting cylinders. A compact, portable, low-cost device equipped with 0.4 litre tank and having maximum operating pressure of 700 bar. Pedal-operated, ...
OLMEC
Flow: 0.02 us gal/h - 79.2 us gal/h
Pressure: 85 psi - 247 psi
Power: 62, 19, 110, 17 W
... mechanically-driven diaphragm pump to achieve a repeatability of ±1%. 70% Energy Savings Helical gears and return spring reduce power consumption by up to 70% compared to conventional mechanical diaphragm ...
Walchem
Flow: 0.3 us gal/h - 3.2 us gal/h
Pressure: 0.15 bar - 1.2 bar
Power: 15 W
... Series have both digital input and Stop/Start inputs built into the pump, enabling either proportional or On/Off control. • IP65 Equivalent Protection A robust housing protects the pump from normal ...
Walchem
Flow: 0.6 us gal/min - 6.7 us gal/min
Pressure: 150, 290, 73 psi
Fluid temperature: -10 °C - 60 °C
... the EWN-Y Pump: • The EWN-Y Series pump combined with EFS flow sensor provides accurate real-time control and display of the dosing rate. • Set point control allows the desired flow rate to ...
Walchem
Flow: 4,000 m³/h
Head: 0 m - 200 m
Fluid temperature: 80 °C
The ClydeUnion Pumps Uniglide-e range is the latest generation of axially split, double entry pumps. The range has been developed using the latest 3D and FEA analysis software together with extensive ...
Celeros
Flow: 20,000 m³/h
Head: 0 m - 300 m
Fluid temperature: 80 °C
The ClydeUnion Pumps Uniglide range consists of both configured and engineered to order axially split double suction pumps. Applications Desalination Water treatment, supply and distribution District ...
Celeros
Flow: 2,500 m³/h
Fluid temperature: 80 °C
The ClydeUnion Pumps Duoglide range consists of both configured and engineered-to-order, axially split case, two stage pumps designed for higher head/flow applications. The Duoglide provides higher efficiency ...
Celeros
Flow: 140 l/min
Head: 14 m
Power: 0.55 kW
... applications) negative pressure tight for vacuum systems no metal parts are in contact with the medium easy to maintain (wear parts can be changed swiftly) universally applicable, quiet and compact The ...
Flow: 200 l/min
Head: 27 m
Power: 0.25 kW - 2.2 kW
The S Pump Series has a special pump housing with a collection container that serves as a liquid reservoir. After filling the liquid container, the pump creates a strong negative pressure ...
Flow: 0 m³/h - 3,500 m³/h
Pressure: 0 bar - 6 bar
Head: 33 m
... volute-casing pumps can be used where the requirement is for pumping clean, turbid or slightly contaminated liquids. Occasional solid contaminations can be handled without affecting the pump due to the ...
Flowserve SIHI Pumps
Flow: 300 m³/h
Pressure: 0 bar - 16 bar
Head: 95 m
Pumps of the series ULN are horizontal, self-priming, single-stage volume casing pumps with dimensions and nominal outputs according to EN 733 / DIN 24255 in back pull out construction. The back pull ...
Flowserve SIHI Pumps
Flow: 740 m³/h
Pressure: 0 bar - 16 bar
Head: 90 m
... replacing the motor without disturbing the pump. There is no common shaft for pump and motor, standard motors can be used. The set is a space saving easy to install pump unit. Applications: Volute ...
Flowserve SIHI Pumps
Pressure: 40 bar
Fluid temperature: -20 °C - 180 °C
Screw pumps for industrial use series SSP (low pressure) and HSSP (high pressure) Service For all pumps Universal Hydraulik guarantee maintenance and repair.
Universal Hydraulik GmbH
The propellant pump is especially suitable for bringing liquified propellants with a low boiling point to a high pressure. The pump guarantees a constant propellant pressure in the supply line and in ...
... Pamasol diaphragm pump has been developed to fill suspensions with HFA 134a or 227. It is specially appropriated to pump the suspension continuously from the mixing tank to the machine ...
Pressure: 400 bar
Fluid temperature: -20 °C - 80 °C
The BM-B Pump is a versatile unit that can be used with injectors, series progressive divider valves or dual line systems. It is ideal for medium- and large-sized machinery, with a maximum working pressure is 5800 PSI. ...
Delimon
Pressure: 300 bar
Fluid temperature: -25 °C - 60 °C
The Electric Barrel Pump can easily operate with all styles of lubrication systems including progressive, injector, direct, and even dualine. AC or DC Electric Barrel Pumps will replace the air or hydraulic ...
Delimon
Flow: 0.005 l/min
Pressure: 250 bar
Power: 50 W
... controls the pump to delivers the rated amount of lubricant to the lubrication point at the right time. Each pump outlet has an over pressure protection valve and each outlet can support a lubrication ...
Delimon
Flow: 0 l/h - 1,600 l/h
Pressure: -0.8 bar - 2 bar
Easy to replace valves Single-piece bellows Conveys sample gas with condensate Proven pump technology Attractive price Requires little space Mounting accessories and fittings optional Housing version ...
Bühler Technologies
Flow: 0 l/h - 1,600 l/h
Pressure: -0.6 bar - 1.4 bar
Easy to replace valves Single-piece bellows Conveys sample gas with condensate Proven pump technology Attractive price Requires little space Mounting accessories and fittings optional Housing version ...
Bühler Technologies
Flow: 800, 400 l/h
Pressure: -0.6 bar - 2 bar
... Conveys sample gas with condensate Long life Atex versions (see separate data sheet) Low noise emission 115 V - versions with FM C-US approval C-versions specifically for conveying flammable gasses Bypass valve ...
Bühler Technologies
Flow: 15.9 l/min - 24 l/min
Pressure: 0 bar - 20 bar
Power: 0.1 kW - 0.8 kW
The pumps of the IOTA series, produce a flow from 19 to 24 l/min and operate at max. 20 bar pressure. They are generally driven by engines, electric and hydraulic motors. The pumps of this series ...
UDOR S.p.A.
Pressure: 250, 500, 350 bar
Constant displacement pump with positive locking piston control Low noise level 600 - 1800 rpm speed range Incl. connection flange and screws
Flow: 26 l/min - 34 l/min
Pressure: 140 bar
Length: 36 cm
The TP03 and TP08 lines of trash pumps are a great example of the power of hydraulics when it comes to pumping liquids with solids. The TP03 pump provides 450 gallons per minute (1688 lpm) of discharge ...
Stanley Infrastructure
Pressure: 720 bar
... stage foot pump. The pump is ergonomically designed, has a robust, compact construction, is service- and maintenance-friendly and combines a low operating force with a high oil output. ...
Flow: 42 m³/h
Power: 2.9 kW
Subaru OHC engine, Automatic low oil shut-off, 3 x hose clips, 2 x hose coupling, 1 x strainer, 1 x spark plug key
Flow: 30 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m
... driven engine fire-fighting water pump group series with high pressure are developed successfully, strictly complying with national standard-GB6245 2006 “Performance requirement and testing method of fire fighting ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
Flow: 18 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m
... other variables to optimize the performance of the pump. It also provides necessary information to operators, such as pump flow rate, pressure, and other relevant data. The controller can be manually ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
... Centrifugal pumps are commonly used in water supply systems to increase the water pressure in buildings. They help move water through pipes to various points in the building, ensuring a continuous supply of water. Industrial ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
The Macnaught 20L ATF Hand Pump is your reliable fluid transfer companion. This pump is equipped with an anti-drip aluminium nozzle, ensuring precision and cleanliness with every stroke. No more messy ...
Macnaught Pty Ltd
The Macnaught 60L ATF Hand Pump is your reliable fluid transfer companion. This pump is equipped with an anti-drip aluminium nozzle, ensuring precision and cleanliness with every stroke. No more messy ...
Macnaught Pty Ltd
Flow: 10 l/min
... within pump body Motor is protected by IP55 rating Supplied with connection cables and alligator clips Pump is suitable to use with Diesel, Kerosene and light oil with viscosity less than 500CST Package ...
Macnaught Pty Ltd
Flow: 6, 1, 15 l/min
Length: 180, 165 mm
Width: 230, 160 mm
Electric gear pump for an intermittent use, for the transfer of low viscosity oil, antifreeze (A), diesel (D), water (W). Protection category IP55. Pump body in brass, gears in bronze and pump ...
Flexbimec
Flow: 15, 6 l/min
Length: 165, 185 mm
Width: 160, 240 mm
Electric gear pump for an intermittent use, for the transfer of low viscosity oil, antifreeze (A), diesel (D), water (W). Pump body in brass, gears in bronze and pump shaft in stainless ...
Flexbimec
Flow: 25, 23, 13.5, 9, 12 l/min
Length: 100, 120, 300 mm
Width: 120, 220, 100 mm
Manual lever action and rotary drum pumps, made of carbon steel with components in aluminium. Main fields of application: transfers and dispenses of small quantities of oil or diesel ...
Flexbimec
Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg
The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...
Flow: 5,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 0.7 kW
... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components • Polypropylene (Moplen) pump ...
OMG sas di Gibogini Stefano e C
Flow: 25,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 4 kW
... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components. • Polypropylene (Moplen) pump ...
OMG sas di Gibogini Stefano e C
Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW
... bar): ca. 1,8-2 N.B. The filter pumps of the series CESE marked with the letter “M” are equipped with a magnetic entrainment pump, which is designed without mechanical seal. This constructional feature ...
OMG sas di Gibogini Stefano e C
Flow: 1,000 m³/h
Head: 120 m
Power: 250 kW
... plastic pumps Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable pump system.It ...
ASV Stuebbe GmbH & Co. KG
Flow: 235 m³/h
Head: 68 m
Power: 30 kW
STÜBBE E-CLASS: entry-level model in the STÜBBE pump family horizontal, single-stage centrifugal chemical plastic pump with mechanical seal in monobloc design (not self-priming) efficient hydraulics ...
ASV Stuebbe GmbH & Co. KG
Flow: 130 m³/h
Head: 42 m
Power: 11 kW
Horizontal single-stage spiral cased pump Shaft sealing through single or double acting mechanical seal Circulation, rinsing, quench or barrier medium depending on application Made of sturdy plastic components, ensuring ...
ASV Stuebbe GmbH & Co. KG
... consisting of Water Pumps, Thermostats, Thermostat Kits, Switches & Sensors, Coolant Flanges and Radiator Caps. In the quest to reduce engine emissions, there is a growing trend among vehicle manufacturers to use Electric ...
Flow: 0 m³/s - 40 m³/s
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C
Vertical immersion pumps are multistage centrifugal pumps for installation on the mounting flange of tanks. PUMPED LIQUIDS Light, non-explosive, clean or contaminated liquids. Water Cutting fluid Lubricants
Arancia Pumps
Flow: 0 m³/h - 110 m³/h
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C
Vertical in-line pumps Vertical and multistage centrifugal pumps. The in-line design enables the pump to be installed on pipes where the suction and discharge ports are on the same horizontal ...
Arancia Pumps
Flow: 0 l/min - 650 l/min
Pressure: 0 bar - 100 bar
Fluid temperature: 0 °C - 60 °C
High pressure pumps High pressure spindle pumps. Solution for deep boreholes and the high pressure clearance of chippings. PUMPED LIQUIDS Light, non-explosive, clean liquids with at least 5% of ...
Arancia Pumps
Flow: 100, 120 l/min
Pressure: 8 bar
Power: 0.35 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...
NARDI COMPRESSORI
Flow: 115, 145 l/min
Pressure: 15 bar
Power: 1.1 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...
NARDI COMPRESSORI
Flow: 36, 43, 29, 35 m³/h
Pressure: 10 bar
Power: 1.9, 2.2 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...
NARDI COMPRESSORI
Flow: 0.7 m³/h - 9,370 m³/h
Pressure: 20 bar - 450 bar
Fluid temperature: -40 °C - 120 °C
... rupture detector available in multiple options: Exakta standard local visual Local visual via pressure gauge Pressure switch (any make, model or case material and signal type: analogue 4 – 20 mA, digital, HART protocol) Pressure ...
Seko S.p.a.
Flow: 11.3 l/h - 2,400 l/h
Pressure: 200, 95, 90 bar
Fluid temperature: -20 °C - 150 °C
Exakta’s broad experience in supporting customers throughout the most challenging projects has led to the development of Nexa XP, a special version of Nexa able to cope with extreme suction conditions and a wide range of chemicals. Nexa ...
Seko S.p.a.
Flow: 3.4 l/h - 660 l/h
Pressure: 124 bar
Power: 1.1, 1.5, 0.18, 0.25, 0.75 kW
... result is a pump that delivers metering precision and consistency for repeatable results and efficient chemical consumption. Reliability Nyva’s ATEX-approved design and zero-leakage profile provide operators with ...
Seko S.p.a.
Flow: 1.6 l/min - 25 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...
Anglada Pumps
Flow: 4.4 l/min - 66 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...
Anglada Pumps
Flow: 6.6 l/min - 100 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...
Anglada Pumps
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining