Advantech's new generation of remote I/O & sensing devices bring an IT oriented spirit to the market. With the advanced concepts of data A-P-P, data Acquisition, data Processing to data Publishing, fulfilling mobile ...
ADVANTECH
... Input Frequency : 150Hz - Over Voltage Protection : +40 VDC - -40 ~ 70°C operating temperature ADAM-3651 is a 8-ch digital input expansion module for ADAM-3600-C2G intelligent RTU.
ADVANTECH
... response time : 150 us (max) - Isolation voltage : 2000 VDC - -40 ~ 70°C operating temperature ADAM-3656 is a 8-ch digital output expansion module for ADAM-3600-C2G intelligent RTU.
ADVANTECH
Industrial standard e-CON connectors allow direct connection of the unit to sensing devices without use of terminal blocks. This minimizes requirement in installation space and wiring work. • Industrial standard e-CON connectors require ...
Binary input/output (I/O) terminal with IEC 61850 interface Easy to use binary I/O extension ISIO 200 is a simple and versatile binary I/O terminal with IEC 61850 interface. For ...
... Encoder Input Module • Input Module • Digital Input Output Module • Strain gauge Input Module The Orbit Network can do more than just interface to Solartron digital displacement transducers ...
Acquisition and actuation module, usable as extension for operator panels with integrated logic ( ATR313, TD329, TD240) or SCADA software. In a standard container DIN43880 9 modules for rail mountain, there are 4 controllers with universal ...
Pixsys
... is important that the pulses fulfill time restrictions. The amount of restriction depends on the settings of the internal digital filter. The communication interfaces with the SLI-8 include RS485 and Modbus RTU. As for ...
Cube20 is a centralized IP20 I/O station with modular function modules and the ability to connect direct to Cube67 modules. The compact modules have a high signal installation of up to 32 channels in one module. This ...
MURRELEKTRONIK
The PCD1 E-Line I/O modules enable centralised automation in the control cabinet and the decentralised distribution of the components through the bus connection. They can be commissioned quickly using the implemented ...
The modules in the Saia PCD1.E-Line S-Series for HVAC applications have a mix of analogue and digital inputs and outputs. With 6 to 12 data points per module, they can be combined easily and are an economical addition ...
Module with 20 digital inputs to read consumption using pulses from any type of meter (electricity, water, gas, etc.) or to detect the status (ON/OFF) of any device or sensor associated with a control system (people, ...
4-input impulse centralising equipment. Inputs are optoisolated to read impulses and it has a 32-bit memory to store the values metered. - It has an RS-485 communications port that can be used with an RS-232 or Ethernet converter ...
... another card and insert it into a free slot. In this manner the device can "grow" with your requirements. 8x Analogue/digital input range: 0…30 / 120 / 250 V, ±30 / ±120 / ±250 V
Orbit Merret s.r.o.
Outputs plug-in card with open collectors for the OMR 700 is fully isolated from the internal bus. The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase ...
Orbit Merret s.r.o.
Combined module of digital inputs and outputs with an NPN open collector and a relay. The integrated power supply has enough power even for additional modules on the bus. 8x digital input ...
Orbit Merret s.r.o.
The I/O module UG 9460 has 8 digital 24V inputs and 4 relay outputs. Via Modbus the inputs can be read and the outputs can be set individually.
... protocol module and I/O module plug and play, features as below: 1. designed with a max of 64 modules, each I/O module is built with 16 channels and each have LED indicator. 2.supports ...
ODOT Automation
... ~85℃ Operational Humidity： 5%-95% (No Condensation) Protection Class： IP20 Profinet Parameter Protocol： Profinet IO Device I/O Data Size： Input Max.1440 Bytes, Output Max.1440 Bytes RT： YES，Min.1ms IRT： ...
ODOT Automation
The CN-8033 EtherCAT I/O module supports standard EtherCAT protocol access. The adapter supports a Max. input of 1024 bytes and a Max. output of 1024 bytes. It supports 32 pcs of extended IO modules. Hardware ...
ODOT Automation
KEB’s C6 Remote I/O system offers various options for connecting process signals to an EtherCAT network. It is made up of a C6 Remote I/O bus coupler and additional I/O modules. The C6 ...
OCS-I/O is a modular I/O system for OCS offering a fieldbus network (CsCAN) from the CNX116 base. It is a flexible I/O system that can be applied as a local expansion I/O or as remote ...
Horner Automation
... great choice for expanding X-Series OCS when one or more digital or analogue I/O are required. SmartMod+ I/O are so compact, they will fit in the smallest of spaces. The SmartMod+ range ...
Horner Automation
SmartBlock a remote I/O solution for any CAN equipped Horner OCS. -Analogue, Digital and Mixed input/output options -5-pin double CsCAN plug -Removable Field Wiring Terminals -Easy-to-read, ...
Horner Automation
... sample rate per channel Status, trigger, tare, alarm, command Signal conditioning 16 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm 3-Way galvanic ...
Gantner Instruments
... digitization 19-bit SAR ADC, 100 kHz sample rate 4 Digital inputs and 2 digital outputs status, trigger, tare, alarm, command Signal conditioning 32 virtual channels, linearization, digital ...
Gantner Instruments
... 10 VDC, 20 kHz update rate per channel High-accuracy digitization 24-bit ADC, 20 kHz sample rate per channel 4 digital I/Os input: state, tare, memory reset, output: state, alarm, threshold Signal ...
Gantner Instruments
The ARD Series comprises of remote I/O module. It is integrated with different functions including its automatic communication speed identification and network voltage monitoring duties. A noise resistance and an extensive ...
Modbus RTU Digital Remote I/O (Sensor Connector Type) The ARM series digital remote I/O units provide input and output expansion for PCs, PLCs, and Autonics logic ...
... series remote I/O boxes transmit various input and output signals between master devices such as PCs or PLCs and secondary devices including sensors and actuators. The IO-Link master type ADIO-ILD can ...
... ServerSave time and wiring cost with peer-to-peer communicationSupports SNMPv1/v2c/v3Friendly configuration via web browserSimplify I/O management with MXIO library for Windows or Linux platformsWide operating temperature ...
Moxa Europe
The Z-D-IN is used to interface 5 digital signals (PUSH BUTTON, LIMIT SWITCH, REMOTE, CONTROL SWITCH, RELAIS etc.) with all of control systems which are able to communicate by the protocol MODBUS RTU through the RS485 ...
SENECA | Automation Interfaces
The Z-D-OUT (hw.1with micro USB port on the front panel) is used to drive N.5 SPST relays from all of the control systems which are able to communicate with the transmission protocol MODBUS RTU through the RS485 serial interface. The ...
SENECA | Automation Interfaces
Z-5DI-2DO is a mixed digital module with a Micro USB front programming port, 5 digital inputs (Redd, Proximity, PNP, NPN, contact) selectable via software, nr.5 totalizers @ 32bit with maximum frequency ...
SENECA | Automation Interfaces
... we also offer FOX I/O modules for signal processing of 2-16 channels and special functions such as pulse width modulation. This ensures that you always have the right I/O modules for every application. The ...
... we also offer FOX I/O modules for signal processing of 2-16 channels and special functions such as pulse width modulation. This ensures that you always have the right I/O modules for every application. The ...
... we also offer FOX I/O modules for signal processing of 2-16 channels and special functions such as pulse width modulation. This ensures that you always have the right I/O modules for every application. The ...
4-Port x4 PCIe interface to support a total bandwidth of 1GB/s Supports four (PoE4) independent GigE Ports Compliant with IEEE 802.3af Single maximum power consumption 23.5W Internal DC 12V Power Input External DC 19-36V Power Input
Multi I/O is a device that integrates UPS into a control system using fully configurable input and output relay signals. It can be used to connect two devices to a single UPS serial communication port. It can be used ...
Cost-optimized CANopen-slave-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication of the master control unit takes place via CANopen or a layer 2 protocol. The ESX.iox fulfils the safety ...
(STW) Sensor-Technik Wiedemann GmbH
The ESX.3ios is a CAN-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication with the master control unit takes place via CANopen, CANopen Safety, the STW protocol ECeS ...
(STW) Sensor-Technik Wiedemann GmbH
... (each 10 A) with current measurement and two further digital power outputs (each 4 A). Of these, two half bridges respectively, which can be combined to form one motor full bridge, and one digital output ...
(STW) Sensor-Technik Wiedemann GmbH
Digital I/O module • 8 digital I/Os • Input 24 V, output 24 V / 0.5 A • Power supply via InRailBus or individual supply via COMBICON connector EtherCAT ...
CANopen module with 8 digital I/Os • Inputs 24 V • Outputs 24 V/1 A • Input/output programmable CANopen According to CiA® Standards • CiA 301 CANopen application layer • CiA ...
CompactPCI® Interface with Digital Inputs and Outputs • 16 inputs 24 V • 16 outputs 24 V, 250 mA • All inputs and outputs electrically isolated Outputs with Short Circuit and Overload Protection ...
... kS/s DAQ board with 8 digital I/O and two 16-bit analog outputs PCI-based 16-channel, 12-bit, 200 kS/s DAQ board with 32 digital I/O and two 12-bit analog outputs PCI-based ...
Measurement Computing
The digital input module stores all measured data on an event basis and sends it to the database via Ethernet. The minimum pulse time is 100 ms. Should the connection be lost, the module stores the data intermediately ...
The digital output module serves to display information, issue alarms and control events. The relays can be interrogated or set via Modbus TCP or the RMS software. It is possible to define the conditions in the RMS software ...
Please specify:
Help us improve:
remaining