Gearmotor suitable for low torque needs. A large selection of reduction ratio is available to satisfy a wide range of application. The applied synchronous and DC motors are the same described ...
Gearmotor suitable for low torque needs. A large selection of reduction ratio is available to satisfy a wide range of application. The applied synchronous and DC motors are the same described ...
Gear ratio: 4 unit - 1,996 unit
Operating temperature: -10 °C - 60 °C
PGM-22 is a high-quality series of Ø22mm brushed planetary gear motors designed for various applications. This gear motor offers reliable performance and efficient power transmission. ...
ISL PRODUCTS INTERNATIONAL
Gear ratio: 4 unit - 596 unit
Operating temperature: -10 °C - 80 °C
... series of Ø42mm brushless planetary gear motors designed for a variety of industrial applications.This gearmotor offers efficient power and reliability. Designed for robust duty, for ...
ISL PRODUCTS INTERNATIONAL
Gear ratio: 4 unit - 645 unit
Operating temperature: -10 °C - 80 °C
... high-quality series of Ø57mm bldc planetary gear motors designed for a variety of industrial applications.This gear motor provides significant speed and torque output. It's suitable for ...
ISL PRODUCTS INTERNATIONAL
GENERAL SPECIFICATION Gearbox Housing：Ruggedised Die-cast Aluminium Worm Gear Material：Bronze, steel or plastic Lubrication：Grease lubricated & sealed for life Bearing Type：High quality ball bearings Insulation ...
3X MOTION TECHNOLOGIES CO.,LTD.
GENERAL SPECIFICATION Gearbox Housing：Ruggedised Die-cast Aluminium Worm Gear Material：Bronze, steel or plastic Lubrication：Grease lubricated & sealed for life Bearing Type：High quality ball bearings Insulation ...
3X MOTION TECHNOLOGIES CO.,LTD.
PERFORMANCE DATA Motor: 63ZYT-125-24 Protection Class:IP50 Duty Cycle :S1 (100%) Rated Voltage :24V Rated Current :4.9 A Input Power:117.6W No Load Current:0.4A Rated Torque:0.27Nm Rated Speed :3300±10% rpm Rated ...
3X MOTION TECHNOLOGIES CO.,LTD.
Gear ratio: 13 unit - 809 unit
08**...08*P... Dc 8mm Smaill Gear Motor Diameter：8mm Lengh ：28-35mm Voltage：4.2V、6V Gearbox：Metal planet gear 、Plastic injection.Factory:China shenzhen Applications medical ...
Constar Motion Co., LTD
Gear ratio: 171 unit
Operating temperature: -10 °C - 70 °C
C1020...10PP...（1） 10mm 2.5V Micro Gear Motor Diameter：10mm Length；19.5mm Voltage：2.5V Speed：110rpm Applications medical equipment, security systems and locks, audio and visual products, personal ...
Constar Motion Co., LTD
Gear ratio: 16 unit - 1,296 unit
19XX...20XP..., 20mm 12V Gear Motor High Torque Diameter：20mm Lengh ： 55~66 mm Voltage：3V、12V Gearbox：Metal injection、Plastic injection Matched Motor Type：BLDC motor、Coreless ...
Constar Motion Co., LTD
Gear ratio: 62 unit
Gearmotor MR42: DC gear motors with permanent magnets 12 and 24 Volt. Further details such as parts’ images, nominal voltage, no-load speed and output power, are available on the technical ...
OSLV ITALIA
Gear ratio: 55, 53, 69, 44 unit
Gearmotor MR62-31: DC gear motors with permanent magnets 12 , 24, 36 and 48 Volt, with starting torque up to 40 Nm. Further details such as parts’ images, nominal voltage, no-load ...
OSLV ITALIA
Gear ratio: 63, 78 unit
Gearmotor MR62-35: DC gear motors with permanent magnets 12 , 24, 36 and 48 Volt, with starting torque up to 45 Nm. Further details such as parts' images, nominal voltage, no-load ...
OSLV ITALIA
Gear ratio: 22.6, 42.7, 83.5 unit
Operating temperature: -20 °C - 25 °C
... Available with speed up to 130 rpm KEY FEATURES • Total length L = 295mm • With or without integrated multi-disc brake • Gear ratios 22.6, 42.7, 83.5
I&W Electric Drive Systems
The worm gear units, IRS series remains one the best solution for simple applications in need of high ratios. This gearbox unit also propose perfect assistance for situation in which backstop needs to ...
Motor drive 3121 Powerful 24 V DC motor with 2-stage worm gear with through going hexagon socket on the output. The motor cable with AMP plug and ...
Ketterer
Motor drive 3133.00 Compact 24 V DC motor with worm gear and continuous hexagon socket. Although the drive was developed for ergonomic table applications, ...
Ketterer
Motor drive 3133.48 Compact 24 V DC motor with worm gear and through going hexagon socket. Although the drive was developed for ergonomic table ...
Ketterer
Operating temperature: -10 °C - 60 °C
Brush-commutated planetary gear DC motor, direct current motor voltage of 12VDC , current 0.2A, rated speed 34rpm power 0.37W. These ...
Transmotec Sweden AB
... factor BLDC motor that has peak operating efficiency at low RPM allowing custom integration with planetary gearbox. High torque from a small form factor, with low power consumption and peak performance ...
Electrocraft
... factor BLDC motor that has peak operating efficiency at low RPM allowing custom integration with planetary gearbox. High torque from a small form factor, with low power consumption and peak performance ...
Electrocraft
... Smooth, quiet and reliable. ElectroCraft's MP36 MobilePower™ geared motor is one of our extensive range of purpose designed, fully customisable mobility motors. The MP36 is a four-pole motor ...
Electrocraft
Customized drive solutions based on tried-and-tested standards – the spn principle Varying demands require individual solutions. Whether you need robust gear components,, high-performance gear ...
... distance • Doubled service life, FEM 2 m design with 4/1 rope reeving • Lifting speed of up to 200 Hz without load with inverter operation shortens the cycle time • Quiet running
... production and sales of the hollow cup permanent magnet DC motor. Hollow cup motor is a high performance motor structure is special, hollow cup motor ...
... production and sales of the hollow cup permanent magnet DC motor. Hollow cup motor is a high performance motor structure is special, hollow cup motor ...
Gear ratio: 10 unit - 50 unit
... right angle gear train gives you more torque for the buck and brings increased capacity in a compact design. With a continuous duty torque of up to 95 inch pounds, this worm driven gear train can sustain ...
small volume, light weight; high transmission efficiency, low noise; high precision, large torque; Applications: Power tool, automatic equipment, robots, medical equipment and precise instruments etc.
Gw industry
· 22mm OD Planetary Gearbox · Small volume, light weight · High transmission efficiency, low noise · High precision, large torque. Applications: Power tool, automatic equipment, robots, medical equipment and ...
Gw industry
Gw industry
... Synchronous AC, DC and Brushless DC versions to suit a wide range of applications. Output shaft length and diameter to suit individual customer requirements. FBD - T3 Series DC Gear Motor Available with a 5 or 7 series FRS-DC motor ...
Gear ratio: 5 unit - 100 unit
... standard motors, which provides a large selection of electric motors, e.g. brake motors, motor with extra cooling, extra energy efficient motors, ...
Radicon
... filling systems and robot axes. 8WSB gear motors 8WSB gear motors are 8WSA servo motors with a directly mounted 1- to 3-stage planetary gearbox. The seamlessly welded housing allows ...
B&R Industrie-Elektronik
Gear ratio: 5 unit - 1,369.3 unit
The 100 Series offers a wide speed range and many voltage options in an ultra-compact package. The 100 Series offers a speed range of 1.3-359 RPM and a torque range of 8-100 in-lbs.
BISON
Gear ratio: 6 unit - 658,503 unit
... Built-in buzzer and indicator light in the motor operation circuit ensures a safe unattended operation. By using either the double or triple safety models, it is also possible to drive the auxiliary ...
SUMITOMO Drive Technologies America
Gear ratio: 50 unit - 100 unit
PMA Series Servo Actuators combine a highly dynamic DC motor with encoder and PMG Gearbox to create a dynamic compact servo actuator. Available in four sizes with gear ...
Gear ratio: 6 unit
Operating temperature: -20 °C - 50 °C
• Small and easy to control • Highly Integrated with encoder and driver • Professionally applied for Exoskeleton
CubeMars
SHINANO KENSHI
Geared DC Motors Spur Gear Spur gear equipped DC motors can address all your in-line drive requirements where ...
NIDEC MOTORS & ACTUATORS
Permanent Magnet DC Stepper LSG55 Geared Specifications: Frame Size: 55mm Step Angle: 7.5° Position Accuracy: +/- 5% max. Number of Phases: 4 phase bifilar Insulation Class: Class A (105°C) Lead Wire: 6 leads 24AWG ...
Hurst
Please specify:
Help us improve:
remaining