Operating pressure: 1,000 psi
... standard with MBC Series • Adapter plate for mounting on flat surfaces available for all manifolds • Make precise, professional installations easy ANVER quality manifolds have been designed to provide ...
Operating pressure: 16 bar
Port size: 25, 20 mm
Main advantages - Separation system for the condense - Easiness and quickness of assembling - Reliability and security - High flow rate - Wide range of accessories - Fire resistance: The system does not stroke or propagate any ...
The OptiSorp steam distribution manifold shortens the evaporation distance of steam released inside a duct or air handling unit (AHU). This prevents steam from coming into contact with components or corners within the ...
Operating pressure: 15 bar - 350 bar
SAI offers valve blocks integrated or flanged in the distributors complete with valves capable of working with different functions. Among the accessories, the vacuum freewheeling block will be available soon with flows up to 80 l/min ...
Operating pressure: 6, 10 psi
AlValves and Manifolds are suitable for use in: Corrosive atmospheres. Resistant to chemical attack. Metal to metal body bonnet seal for high pressure and high temperature sealing. Unique non-rotating hardened tips ...
Operating pressure: 700 bar
Port size: 0.38 in
Manifold, 4 ports - including Manometers, 4 needle valves w/pressure gauges, 3/8" connection Adjust each port manually, for the correct delivery of fluid for each application
Operating pressure: 0 Pa - 1,000,000 Pa
These block parts can be assembled freely into a variety of manifold blocks for concentrated branching. Even with about a half the size of steel piping, assuring the same flow rate. The appearance dimension is as ...
Operating pressure: 0 MPa - 1 MPa
Port size: 6, 8 mm
... series: fixed air outlet direction Any number of Blocks can be added. Best suitable when used with cylinders. The manifold can be used for circulating cooling water of about 40℃. Make sure to use PISCO Insert-ring ...
125 mm interaxis dual manifold for heating plant with threaded outlet Carbon steel Insulation Fixing kit Out-of-standard products can be realised according to Customer’s requirements • - Maximum fluid température: ...
Comparato Nello S.r.l.
NUT FEMALE Ø 1″¼ OUTLET 125 mm interaxis dual manifold for heating plant with nut outlet Carbon steel Insulation Fixing kit Out-of-standard products can be realised according to Customer’s requirements Diacol ...
Comparato Nello S.r.l.
Port size: 1 in
NUT FEMALE Ø 1″ OUTLET 125 mm interaxis dual manifold for heating plant with nut outlet Carbon steel Insulation Fixing kit Out-of-standard products can be realised according to Customer’s requirements Diacol ...
Comparato Nello S.r.l.
Operating pressure: 180 bar - 310 bar
Plates represented in the following catalogue have fixing holes in compliance with DIN 24340 standards in size NG6 and valve body cavity SAE. The products are made of aluminium alloy 6082-T6 in compliance with EN AW 6082 AlSi1MgMn and ...
EUROFLUID HYDRAULIC
Operating pressure: 200 bar - 400 bar
The sub-plates represented in the following catalogue have fixing holes in compliance with DIN 24340 standards, with sizes NG6 - NG10- NG16-NG25. The products are made of cast iron GG25, according to UNI EN 16482 standard. The O-ring ...
EUROFLUID HYDRAULIC
Operating pressure: 0 bar - 210 bar
CUSTOMIZED ALUMINIUM MANIFOLDS Available Alloys Alu 2011,6082,7075,2017,6026LF. Possibility to include surface treatment as Natural anodizing , Colored anodizing or Hard black anodizing Possibility to make some assembly ...
EUROFLUID HYDRAULIC
Operating pressure: 60 bar
Port size: 0.13, 0.25, 0.38, 0.5 in
Standard fittings Type 100 – Brass fittings – High resilience – Nickel-plating for corrosion protection Operating temperature max. +150°C Dependent on the temperature range of the tube/pipe used Dependent on the pressure ...
Port size: 0.25 in
... removed as per need according to future requirements, in case customer wish to add on extra valve Inlet & exhaust on the manifold
This manifold is designed to incorporate a 0-8mm high vacuum valve as the vacuum shut-off. The front tube is for inert gases (17mm O.D.), with a 10mm hose connection. The rear tube is for vacuum (22mm O.D.), with two ...
Synthware glass
Forward facing 0-8mm high vacuum valves allow easy operation of manifoldinside of a fume hood. Main parts are spaced 100mm center to center.Adapter components or stoppers are available below, others need to be ordered separately. M330804 ...
Synthware glass
Port size: 8 mm
With 14/20 outer joint at the center to fit a rubber septum for keeping syringes under an inert environment, cutting down on the number used. Main tube is 22mm O.D. with right hose connections (10mm). Delivery ports have 8mm hose connections. Accessories: S181530 ...
Synthware glass
Port size: 0.75, 1 in
The DeltAll system has been specifically developed for the following applications: Distribution of both hot and cold water in sanitary applications Low temperature heating systems (with radiant panels) High temperature ...
Unidelta S.p.A.
VM-3 and VM-5 series valve manifold assembly functions as a mechanical solution to relative pressure transmitter system. Specifically, it executes tasks such as initializing a transmitter unit, and setting the zero position ...
VM-3 and VM-5 valve manifolds are utilized with pressure transmitters. These valves allow operations to be carried out on the transmitters, like the initiation of a transmitter operation or adjusting a zero dimension ...
The VM-2, which is manufactured by Aplisens, is a 2-valve manifold. This 2-valve manifold has a body made of 316-grade stainless steel. It has an input measurement of 1/2NPT F. and an output measurement of 1/2NPT F.
... 10,000psi (670bar)rated. The two-valve isolating and venting manifold used mainly in gauge and static instrument applications such as pressure switches, pressure transmitters and manometers. The manifold ...
Alco
... lines (also known as vacuum gas manifolds) are a commonly used piece of chemistry apparatus originally developed by Wilhelm Schlenk. Schlenk lines basically consists of a dual manifold with several ...
1.It is available to integrate the direction control valves of the same series to form value group to save space and cost. 2.It is easy to examine when there are faults owning to the unified air intake and exhaust and unified wiring. 3.Flexible ...
Operating pressure: 0 psi - 10,000 psi
Port size: 0.16 in
Combines isolating and venting in a single valve, eliminating the need for tubing and fittings Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling static pressure transmitters, ...
NOSHOK
manifolds sample of manifold without reductions It is often difficult to obtain the space required for a series of detachments, or, for safety, it is advisable to have several detachments with the least ...
The Binary Gas Manifold (BGMA) has equal conductance at each outlet for the most even gas flow and the fastest reactive sputtering response time, regardless of manifold length. Flow uniformity is verified ...
The square tube gas manifold is an adjustable solution for non-uniform systems. Flow uniformity is verified by finite element analysis. It has a robust, simple design and is easily cleaned. Features Outlets ...
The T-bar gas manifold is our most compact model, for use when limited space is a factor. Flow uniformity is verified by finite element analysis. It has a robust, simple design and is easily cleaned. Features Compact ...
Port size: 0.25, 0.13, 0.38, 0.5 in
- For manifold bases external pilot is common - A base is ordered as internal pilot and can be changed into external pilot by removing pipe plugs from the external pilot ports (individual base). - Manifold ...
1 in. diameter manifold trunks are closed at one end and swedged to accept 1 in. copper at the other. Available with 3⁄8 in. and 1⁄2 in. brass CrimpRing™ fittings, with or without 1⁄4-turn brass mini ball valves (MBV), ...
Remote mounting manifolds Features The 9614 manifold assembly comes as standard equipment on Hytec pumps. Use this manifold to convert these pumps back to manifold ...
Operating pressure: 3,000, 5,000 Pa
... devices in the field up to 5000psi Brass & Stainless Steel Options QTCM Brass Manifold - for pressure calibration from 0 to 3000 psi QSCM Stainless Steel Manifold - for higher pressure calibration ...
Operating pressure: 35 MPa
... calibrating multiple pressure instruments in a thermal chamber • Second side connection can be used to daisy-chain multiple manifolds together • Made in USA
Operating pressure: 250, 260 bar
... UNF Ref. 40943504 for AC Manifold. STAINLESS STEEL Screw 7/16’UNF Ref. 40943502 for AC Manifold. CARBON PTFE gasket Ref. 11267630 for Manifold with PTFE packing Metalotnatic gasket Ref. ...
Please specify:
Help us improve:
remaining