- Hydraulics - Pneumatics >
- Compressor >
- Hydraulic power unit >
- Brevini
Brevini hydraulic power units
The hydraulic power stations HA/HAL are designed for actuating hydraulic clamping elements in forming presses. A large number of electro-hydraulic (HA) or air-hydraulic ...
Operating pressure: 20 bar - 210 bar
Nominal power: 0 kW - 4 kW
Flow rate: 0.35 l/min - 14 l/min
Hydraulic compact-power units are mainly used for lifting devices and hydraulic clamping units. The products will be adapted to the specific customer ...
Operating pressure: 200 bar
Special Hydro-pneumatic Power unit - Maintaining pressure - 200 bar
Operating pressure: 700 bar
Nominal power: 0.3, 0.6, 0.4 kW
Flow rate: 0.25 l/min - 2.49 l/min
The compact hydraulic power pack type INKA consists of the tank, the integrated motor and the radial piston pump directly attached to the motor shaft. The directly mounted electronic communication box ...
HAWE Hydraulik SE
Operating pressure: 170 bar
Nominal power: 1.5 kW
Flow rate: 3 l/min
The compact hydraulic power pack type HICON’s encapsulated design offers protection against temporary immersion in water according to protection class IP 67. The pump module integrates a gear pump and ...
HAWE Hydraulik SE
Operating pressure: 0 bar - 210 bar
Nominal power: 190, 300 W
Flow rate: 0 l/min - 0.8 l/min
... 1/4“ filling screw serves as the hydraulic fluid reservoir. Features and advantages: Suitable for nominal operating mode S2 (short period operation) and S3 (periodic intermittent operation) DC ...
HAWE Hydraulik SE
Operating pressure: 90 bar
Flow rate: 35 l/min
Tank capacity: 20 l
The new CytroPac power unit provides maximum power in the smallest space with everything you need for fast installation – including an economical Sytronix drive, completely wired frequency ...
Bosch Rexroth - Mobile Hydraulics and Electronics
Operating pressure: 90 bar
Nominal power: 4 kW
Flow rate: 35 l/min
Compact design for easy integration, energy-efficient variable-speed pump drives, low noise thanks to innovative positioning of components, equipped for i4.0 with integrated frequency converter and sensors Compacter layout for ...
Bosch Rexroth Hägglunds Products and Solutions
Operating pressure: 30, 160 bar
Our broad range of standard and specialized hydraulic power units are engineered to meet any requirement. In order to minimize downtime, our hydraulic power units are ...
Operating pressure: 1 bar
... therefore, no complex mounting frames are required Inside and outside of the tank is oil-resistent powder-coated Hydraulic Power Units can be made according to customers demand.
Operating pressure: 210, 280 bar
Nominal power: 9 kW - 96 kW
Flow rate: 20 l/min - 170 l/min
ZwickRoell's servohydraulic testing actuators feature sturdy, robust construction and are used both in servohydraulic testing machines and as single actuators, for example on a clamping plate. When used in conjunction with a servo valve ...
Operating pressure: 140 bar - 250 bar
Nominal power: 9 ch - 125 ch
Flow rate: 24 l/min - 140 l/min
The HD hydraulic power packs are designed to power the Joy range of drilling machines. The quality of the components and the outstanding hydraulic performance makes ...
Nominal power: 3 W - 25,000 W
Flow rate: 16.5, 24, 51, 117 l/min
Diesel and electrically driven multipurpose power packs DESMI offers a very comprehensive range, 3-219W, of diesel and electrically driven multipurpose power packs / hydraulic power units ...
... demand. Includes: Hydraulic pump with connector, Tipping valve 150L with base plate, Suction kit and 2-way Pneumatic control with cabin support Does not include Power takeoff (PTO), must be purchased ...
BEZARES S.A.
Wet Kit for 3,5 tons with power takeoff (PTO) Includes: Hydraulic pump with connector, Button control, End of stroke, Suction kit, cylinder stroke 1050 mm with supports and dumper points. This kit ...
BEZARES S.A.
Wet Kit with single acting Mini power pack Pump 3.3cc/rev. Plastic oil tank 7L. Motor 12V. Cylinder stroke 1050mm, Dumper points and button control
BEZARES S.A.
Nominal power: 0.4, 0.8, 2.2 kW
Electric power supply 4200 alow to pilote the opening/closing of the emergency electromagnetic 2SA. This device allow to reach electric economical mode who allow to reduce the electrical consumption of ...
STROMAG
Operating pressure: 0 bar - 2,500 bar
Nominal power: 45 kW
Flow rate: 0 l/min - 10.7 l/min
High-pressure Ultra Clean unit - electric version HPE-250-50-S7-Cx (V3AM) High pressure cleaning Equipment for optimal surface preparation with use of water only. Application item: Industrial cleaning ...
Operating pressure: 630 bar
Flow rate: 0.31 l/min
Electric hydraulic power unit: • equipped with 2,5 m hydraulic hose with PM quick coupler • works with all ERKO hydraulic heads and ...
Erko
Operating pressure: 380 bar
Nominal power: 0.9 kW
Flow rate: 0.66 l/min
• equipped with hydraulic hose with PM quick coupler • standard equipped with hydraulic hose (2,5 m) with PM quick coupler, enabling work with all ERKO hydraulic heads and devices with ...
Erko
Operating pressure: 380 bar
Nominal power: 1.4 kW
Flow rate: 1.33 l/min
... equipped with hydraulic hose with PM quick coupler • standard equipped with hydraulic hose (2,5 m) with PM quick coupler, enabling work with all ERKO hydraulic heads and devices with ...
Erko
Nominal power: 2 kW
... from 300 to 3.000 Nm. Maximum power on loosening; Oil Heat exchanger to reduce the impact wrench heating; Thermal relay to protect the electric motor; Lateral handles suitable for transportation ...
Operating pressure: 100 bar - 700 bar
Tank capacity: 5 l
Operating pressure: 250 bar
Nominal power: 0.7 kW
Flow rate: 1.3 l/min - 1.9 l/min
... electro-hydraulic power pack powered by AC 230V power source, double acting operated throughwith a 4/3 hand distributor valve, with a low pressure gear pump up to 250bar and a constant ...
Operating pressure: 250 bar
Nominal power: 0.7 kW
Flow rate: 1.3 l/min - 1.9 l/min
EDPL250SE single acting electro-hydraulic gear pump Among the electro-hydraulic power units of the EDP Series manufactured by BELL there is the EDPL250SE single acting ...
Oil Power Pack is a complete oil power supply, up to 35 bar (500 PSI), to HF clutches and Hybrid Transmissions. It includes oil flow valve, pressure valve, proportional valve, pressure ...
... transmitting energy in hydraulic systems. There are various mineral oils, lotion and synthetic hydraulic oils. 二. The function of the hydraulic system(Hydraulic Power ...
Nominal power: 6 kW - 225 kW
Tank capacity: 30 l - 430 l
POWER PACK FROM 5,5 TO 225 kW These powerful, technologically advanced and efficient hydraulic power units can be used both on the undercarriages and with various hydraulic tools.
Operating pressure: 4 MPa - 8 MPa
Nominal power: 1.5, 2.2 kW
Flow rate: 14, 28 l/min
... standard hydraulic units. By adding the inverter drive we increase energy savings to approximately 69% as compared to NACHI-Fujikoshi’s standard hydraulic units. POWER ...
Nominal power: 0 kW - 160 kW
Tank capacity: 10 l - 10,000 l
... of experience in building power units. These power units are planned and designed according to our customer requirements We are flexible “Universal” means special ...
Operating pressure: 120 bar
For use with hydraulic rollblocks max 1740 psi The pump is actuated by the manual air toggle or solenoid operated valve located at the base of the pump. It has a 40 cu. inch reservoir, with 20 cu. inch usable capacity. ...
Hydraulic power unit for semi-active chassis HOERBIGER supplies hydraulic power for intelligent suspension systems used to improve vehicle ride comfort. ...
Tank capacity: 3 l
WPT’s Power’s self-contained Hydraulic Power Unit (HPU) is the ideal hydraulic power source to operate any WPT Hydraulic Power ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining