Bühler air coolers
Power: 93.2 W
Motor - 1/8HP (The motor of cooling system could be upgrade.) Size - 440x220x460mm
- Inlet Air Cooling System for GT system - Semi Dry-Fog®, a fine fog with a mean droplet size of 10-30 μm, cools gas turbine intake air and improves power generation output during hot ...
... Answering to the many industrial needs, SIMACO - leader in the fluid moving technology - designed a dedicated range of close loop air-water cooling units, where the SIMACO pump, actual beating heart, is naturally assembled. This ...
Power: 5 kW - 180 kW
Maximum temperature: 7 °C - 35 °C
Flow rate: 3.6 m³/h - 33 m³/h
CE Certificated Description Benefits & Features •Controlled by PID micro computer, accurate temperature control. •Pump overload protection to ensure service life effectively. • Alarm device for low liquid level to guarantee ...
Flow rate: 60 m³/h - 4,500 m³/h
Pressure: 12 bar - 16 bar
... particularly high compressed air temperatures. They use these aftercoolers in the central compressed air station of industrial plants, workshops or laboratories, among ...
Flow rate: 180 m³/h - 12,600 m³/h
Pressure: 12 bar - 16 bar
... cooling of compressed air: Water-cooled compressed air aftercoolers of the HWO-A series from FST are an extremely efficient way to cool compressed air. This enables ...
The machine tools used in production processes require a reliable and precise temperature control. The cooling of the mechanical components and the cutting and hydraulic fluids allow the machine tools to work at high speeds, in an accurate ...
... using ambient air, but tempered air or conditioned process air can also be used for special applications. Depending on the application, coolers can be divided into different ...
1.The Industrial Chiller is mainly used to provide cooling water for high-end industrial equipment, at the same time, also widely used in mechanical processing and manufacturing,plastics and rubber,electrical and electronic, ...
Power: 800 W
... cooled by water, allowing you to host up to 45 kW of equipment without heating the air on output, and without disrupting the ventilation of the servers. The heated air coming from ...
Automatic pouring and cooling lines with the possibility of tracking software to control the cooling time.
Power: 700 W
... conveyed through the tunnel. Special air coolers and fan outlets within the tunnel produce, depending upon design, either a top to bottom or a cross line flow of chilled air. T-track ...
Meyn
Maximum temperature: 1,300, 1,600 °C
... direct air-swept cooler design consists of a rotating cylinder with internal flighting. This cooler design brings hot product into direct contact with the cooling medium, in a counter ...
Pressure: 6 bar
... patented liquid cooler for cool down of shrink-fit chucks. Fast, contour-independent cooling, cleaning and rust protection. The housing of the FKS 04 S is filled with cooling water. The water is lifted into the tower ...
Maximum temperature: 0 °C - 40 °C
Pressure: 2 bar - 7 bar
Cold air generator at most 60°C lower than the intake air only by blowing compressed air (Vortex principle). Used for cooling in many applications.
AUTOMAX
Power: 14,500 W - 144,000 W
Maximum temperature: 5 °C - 35 °C
Flow rate: 40 l/min - 360 l/min
Air Chillers adopt fin condensers (without need for cooling water) with the features of rapid heat transmission and excellent heat dispersion. This series can be afforded cooling ranges from 5~35℃, even ...
... distortion or "checking." • The cooling conveyor is constructed in a modular fashion to allow for installation in various widths and sizes. • Fresh air intakes on the top of the cooling chamber provide ...
Power: 1.35 kW - 412 kW
Maximum temperature: 12, 35, 7 °C
Flow rate: 700 m³/h - 57,000 m³/h
New range of MNF series air condensed chillers, three versions available. M version (single-phase) stainless steel tank, coaxial evaporator, rotary compressor. E version (three-phase) plastic tank, plate evaporator ...
Maximum temperature: 6 °C
... microprocessor control K-Touch 4012 available in many languages cooling down to 6°C core temperature possible stainless steel evaporator all current coolants usable Technical data: dimensions: 168 cm w x 117 cm d x ...
Maximum temperature: -20 °C - 50 °C
Pressure: 5.5 bar - 12 bar
Tool for the rapid filling of the radiator and the cooling system of cars and trucks. The system is vacuum-operated and allows for the cooling system to be filled quickly and completely, without having ...
Power: 13 kW
Power: 2.75 kW
Quick Details Condition: New Place of Origin: Guangdong, China (Mainland) Brand Name: Shantou Huaxing Model Number: LQ Application: shrimp chips/ round chips Voltage: 380V/50HZ Power(W): 2.75 KW Weight: 1700KG Dimension ...
Keep the engine in a proper temperature range under all operating conditions. The cooling system should not only prevent the engine from overheating, but also prevent the engine from undercooling in winter.
Power: 12.5 W
From hot to cold and vice versa with improved efficiency HANAU – VACUUMSCHMELZE GmbH & Co. KG (VAC) is developing of environmental friendly materials for magnetocaloric cooling. The collaboration with the Fraunhofer ...
Cooling machine is used to be connected between the frying machine and the instant freezing machine, it blows air to the surface of the products, reduce the temperature of the surface products in order to deduct the load ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining