CEJN high-pressure hoses
Inner diameter: 6 mm - 100 mm
Outer diameter: 11.9 mm - 132.3 mm
Pressure: 0.3 bar - 167 bar
... corrosive liquids and gases for applications that involve high pressure, temperatures up to +540 °C*, vibration and flexure. Type BW673 is designed for Chlorine applications. Applicable as transfer hose ...
Inner diameter: 9.4, 12.8, 19.5 mm
Outer diameter: 16, 19.5, 28.5 mm
Pressure: 80 bar
... supply fabric reinforced hose/ braided hose industrial robot, robotic, welding equipment, welding robot, welding gun: welding spot resistant hose, hose for dresspack ...
NORRES Schlauchtechnik GmbH
Inner diameter: 6.4, 12.7, 7.9, 9.5 mm
Outer diameter: 14.1, 21.4, 15.7, 18.1 mm
Pressure: 220, 250 bar
Application high pressure cleaning equipment Standard EN 853 1SN Inner tube synthetic rubber, durable against cold and hot water with standard cleaning agents Reinforcement ...
Inner diameter: 19 mm - 50.8 mm
Outer diameter: 32.2 mm - 681 mm
Pressure: 250 bar - 430 bar
High Pressure use for petroleum based hydraulic fluids, especially suitable for a long cycle-lifetime, very good flexibilty. Temperature: -40 ° C to +100 ° C; Outer cover: made of synthetic rubber, highly ...
Inner diameter: 20 mm - 152 mm
Pressure: 15, 17, 20, 25, 30 bar
Temperature: -30 °C - 80 °C
Excellent resistant flat hose, made of rubber, double layer of polyester insert Material: Specially-formulated black nitrile rubber, double layer. Polyester thread insert, black Applications: Motopump discharge ...
Inner diameter: 5.4 mm - 22.2 mm
Outer diameter: 11.2 mm - 30.5 mm
Pressure: 52, 69 bar
The 200 series hose features a reinforced chlorinated Polyethylene (CPE) synthetic rubber liner, wrapped in a double stainless steel external braid for additional resistance to abrasion. Ideal for use ...
Inner diameter: 3 mm
Outer diameter: 7 mm
Pressure: 10,000 psi
... • Hose is hard to break and very flexible • Adapt from hose to virtually any device under test with only one connection • A corrosion resistant strain-relief on each hose ...
Inner diameter: 3 mm
Outer diameter: 6 mm
Pressure: 69,000 psi
... re-make hundreds of times without over-tightening a tube fitting • Brass or Stainless Steel connections in 1/4" or 1/8" tube fitting sizes • High pressure hoses ...
Inner diameter: 3 mm
Outer diameter: 6 mm
Pressure: 69,000 psi
... Easy! Install flexible, high pressure hoses in applications where a rigid tube puts undue stress on tube fittings. Hoses fit Swagelok, ...
Inner diameter: 4 mm - 13 mm
Outer diameter: 6.2 mm - 17.6 mm
Pressure: 28, 30, 35, 40 bar
... pneumatic hose, Temperature -10 °C to 60 °C, Hose Ø 6.2x4, PN at 20 °C max. 40 bar, Roll of 50 m, blue Flexible, high-quality, PVC hose with a smooth inner layer and ...
RIEGLER & Co.KG
Inner diameter: 6 mm - 76 mm
Pressure: 0 bar - 1,450 bar
... permanent labelling Our specialty Multispiral high pressure hoses DN6 - DN76 Waterblast hoses DN6 - DN25 up to max. 1450 bar working pressure ...
Inner diameter: 65, 52, 38 mm
Pressure: 60 bar
Temperature: -40 °C - 100 °C
SYNTHETIC DOUBLE JACKET High pressure lay flat hose Municipal and industrial high pressure hose, ideal for snowmaking operations. ...
Inner diameter: 4 mm
Outer diameter: 8.6 mm
Pressure: 210 bar
... thermoplastic polyurethane - Type - Hydraulic high pressure hose - Hose inside diameter - 4 mm - DN - 4 mm - Hose outside diameter - ...
Inner diameter: 19.5 mm - 51.1 mm
Outer diameter: 32.3 mm - 71.1 mm
Pressure: 345 bar
... PROTECTION • PRODUCT RESPONSABILITY • ENERGY CONSUMPTION REDUCTION • LEAKAGE-FREE HOSE ASSEMBLIES • OIL-LESS ASSEMBLIES • FULL SYSTEM CONTROL IN CASE OF HIGH PRESSURES, VIBRATIONS AND ...
Inner diameter: 3 mm - 8.1 mm
Outer diameter: 7.9, 15.1 mm
Pressure: 1,500, 2,200 psi
Parker Polyflex High Pressure 2440D Hoses are developed for High and Ultra High Pressure applications. The excellent handling increases ...
Parker Polyflex Division - Europe
Inner diameter: 12.7 mm - 38 mm
Outer diameter: 20.7 mm - 47 mm
Pressure: 10, 20 bar
Long service life Wide range of dimensions Applications A versatile hose for high pressure cleaning operations and general discharge service using hot or cold water and many ...
Trelleborg Industrial Hose
Inner diameter: 6.3 mm - 25.4 mm
Outer diameter: 13.4 mm - 35.8 mm
Pressure: 8.8 MPa - 90 MPa
No-Skive braid Hose R161SN is designed for high pressure hydraulic applications in Petroleum base hydraulic and lubricating oils. temp range from -40 °C up to +100°C. Compatible with ...
Parker Stratoflex
Inner diameter: 19.05 mm
Outer diameter: 34.54 mm
Pressure: 32,000 psi
... Tube: Black, oil-resistant Polychloroprene Type A material allows for the high pressure, high temperature performance required in demanding ...
GATES
Inner diameter: 6.6 mm - 51.1 mm
Outer diameter: 13 mm - 64.1 mm
Pressure: 40 bar - 225 bar
Wire Braid Hydraulic Hose meets EN 853 1 SN, SAE 100R1 and ISO 1436 1SNR1 TubeSynthetic rubber, résistant against hydraulic fiuids (HL, HLP, HLPD, HVLP, HFA, HFAS, HFB, HFC) ReinforcementOne braid of high ...
Semperflex
Inner diameter: 32 mm - 203 mm
Outer diameter: 36.4 mm - 211.6 mm
Pressure: 15, 11, 20, 18, 16 bar
... bulk fuel discharge/loading, tank-to-tank transfer, offshore rig supply, drill water, drilling muds, cement, bulk powder, high pressure bypass, and drinking water transport (NSF approved versions). ...
Inner diameter: 9.5 mm - 52 mm
Outer diameter: 21 mm - 71.5 mm
Pressure: 0 bar - 420 bar
Application:suitable for using oil base hydraulic oil of the hose Tube:the hose consists of a layer of heat-resistant synthetic rubber inner rubber layer Reinforcement:ultra-high ...
Luohe Letone Technology Co., Ltd.
Inner diameter: min 2.5 mm
Outer diameter: min 4.0 mm
... workplace where environment temperature is too high (>55 ℃) or full with chemical gas, because it may lead to a hose soften and the pressure of resistance drop dramatically. 3.Please ...
Inner diameter: 51 mm
Outer diameter: 72 mm
Pressure: 10,000 psi
... Cementing hose assembly was successfully certified to API 7K-FSL 0-TRange III in January 2020. The ultra-high abrasion resistant tube is specially formulated to guarantee long service ...
ALFAGOMMA
Inner diameter: 5 mm - 25.8 mm
Outer diameter: 9.7 mm - 33.4 mm
Pressure: 95 bar - 360 bar
Composition: ·Inner tube: polyester elastomer. ·Reinforcement: one braid of steel wire. ·Cover: black polyurethane. Working temperature: From -40º C to +100º C limited to +70º C for air and water based fluids.
Inner diameter: 0.3 mm - 700 mm
Outer diameter: 0.6 mm - 950 mm
... Dechengwang Molded/flexible/extruded PTFE tube provide a low-friction, non-stick surface suitable for use as machining stock for all kinds of chemical, electrical and mechanical components where the outstanding performance ...
Inner diameter: 6 mm - 51 mm
Outer diameter: 13.4 mm - 67.3 mm
Pressure: 580 psi - 3,270 psi
The application of the hydraulic hose: hydraulic hose The high pressure hose is mainly used for Mine hydraulic support ,oilfield exploitation ,object ...
Inner diameter: 1 mm - 40 mm
Outer diameter: 2 mm - 44.45 mm
Temperature: -200 °C - 260 °C
... continuous working temperature than FEP Longer continuous lengths than PTFE (due to melt processability) Better performance in high pressure/temperature application than PTFE Technical ...
Polyfluor Plastics bv
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining